Lee1977 6,656 #552 Posted May 15, 2022 2 hours ago, ebinmaine said: From your picture it looks to be around 3" or 4" out of alinement. Part of that could be the camera angle. 1 Share this post Link to post Share on other sites
ebinmaine 67,422 #553 Posted May 15, 2022 1 hour ago, Lee1977 said: camera angle Yeah that's it. The pic is also distorted for some reason. It's pretty straight. 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #554 Posted May 17, 2022 On 5/15/2022 at 7:46 PM, ebinmaine said: Yeah that's it. The pic is also distorted for some reason. It's pretty straight. So what did you do to get it “pretty straight” ? Share this post Link to post Share on other sites
ebinmaine 67,422 #555 Posted May 17, 2022 2 minutes ago, Horse Newbie said: So what did you do to get it “pretty straight” ? There's an adapter that bolts to the front of the tractor frame. There's the chipper itself. Bolted to the chipper there is a piece that kind of hangs off of the tractor frame adapter. That piece has four bolts in it and two of them were loose and rusted. I was not aware of that. I looked at it for a minute last night while I was fiddling around with other things and I'm still not convinced it's solved, but it's definitely better. So I'm headed the right direction. 1 Share this post Link to post Share on other sites
D_Mac 8,607 #556 Posted May 17, 2022 (edited) @ebinmaine Edited May 17, 2022 by D_Mac 1 1 Share this post Link to post Share on other sites
ebinmaine 67,422 #557 Posted May 17, 2022 2 hours ago, D_Mac said: @ebinmaine Mines rusty. Originally green. 😂 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #558 Posted May 18, 2022 Two old Buddy‘s ... Let‘s work Together c‘mon c‘mon let‘s work together unrealistic ? No definitively not! Remove the front inlet shield on the Mowerdeck for a easier pass thru, give her a brand new Belt, let her use fresh sharpened Blades regrease all zerks and let the deck lifted the whole time and here we go.. high Grass mowing is absolute possible, it just chews a belt quicker than normal but so it works in 1st Gear. We had a bet what my 55 Year old Wheelhorse is able to do. - i ( respectively the Wheelhorse) won the Bet - that give an extra Oilchange and a Wash and few pumps of fresh Grease. ya think we‘re stupid huh ? Yap, that could absolutely be happen, but we had a ton of Fun. ....and it give us a perfect Pict of the Day. 3 3 Share this post Link to post Share on other sites
D_Mac 8,607 #559 Posted May 19, 2022 My 1075 Wheel-A-Matic. Big block, short frame, tall stack, baby moons, custom. 1 4 Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #560 Posted June 4, 2022 Just happy it isn’t snow season anymore… 7 2 Share this post Link to post Share on other sites
rjg854 11,360 #562 Posted June 4, 2022 Getting that all clean for the Big Show, Craig? I'm sure you'll be bringing it, right? 2 Share this post Link to post Share on other sites
AMC RULES 37,130 #563 Posted June 4, 2022 14 minutes ago, rjg854 said: Getting that all clean for the Big Show, Craig? I'm sure you'll be bringing it, right? Wouldn't miss it. Big shows featured tractor this year. 1 1 Share this post Link to post Share on other sites
rjg854 11,360 #564 Posted June 4, 2022 Will you have the hood repaired by then? 1 Share this post Link to post Share on other sites
peter lena 8,609 #565 Posted June 4, 2022 @davem1111 https://www.opendoorremote.com/lubriplate-chain-and-cable-lube-11oz-aerosol-can/?msclkid=956c541376151796000a36883876dc82 if you were to get this into every body seam and joint , and fender well drip edge areas , it will leave a penetrating oil film stoppage to rust , I then follow up with the extra heavy open gear black spray . tail gate and especially lower cab seams in fords , thats a major rot area . been doing this for years on my stuff , zero rot or rust , get under car / truck at service time , with touch up cans , rarely needed . a Tyvek suit , gloves , and a lift , rustproof your stuff , just oil film , oily pete 1 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #566 Posted June 4, 2022 1 hour ago, rjg854 said: Will you have the hood repaired by then? Possibly, or a work in progress at that point. 1 Share this post Link to post Share on other sites
Gregor 4,846 #567 Posted July 8, 2022 Got some seat time on the 175 this morning hauling scrap wood to the burn pile. Even used my Wheel Horse cart. I haven't done anything to it since the day I brought it home with the 656. 4 3 Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #569 Posted July 8, 2022 Installed the missing head light lens and went with orange/amber lamps. I don’t see myself using this one at night ever so why not be a little different. 6 6 Share this post Link to post Share on other sites
Pullstart 62,834 #571 Posted July 8, 2022 Some round hoods in the shop, and a lever steer lurking in the reflections… 5 3 Share this post Link to post Share on other sites
Achto 27,565 #572 Posted July 8, 2022 (edited) Just a big happy girl. Edited July 8, 2022 by Achto 4 2 4 1 Share this post Link to post Share on other sites
ebinmaine 67,422 #573 Posted July 8, 2022 Here's a front-ish view of the latest C160 5 4 Share this post Link to post Share on other sites
