Howie 886 #1 Posted June 13, 2018 I have this 12 inch moldboard plow and needed to extend the hitch. Put an electric lift on my 72 Raider 12 and the motor on it sits across the back of the transmission right in the way of the pl;ow using the slot hitch. With some mockup I saw that if extended 3 1/2 inches it would clear. Went to a local Amish welding shop to see about getting the steel and have him weld it up. I was pleasantly surprised he charged me a whole 10 dollars to do this. Figured the steel would be more than that! Would have been ok with more. 2 Share this post Link to post Share on other sites
Achto 27,505 #2 Posted June 13, 2018 Have any pictures? 1 Share this post Link to post Share on other sites
Howie 886 #4 Posted June 20, 2018 Let's try another one. 2 Share this post Link to post Share on other sites
Howie 886 #5 Posted June 20, 2018 That is with the original hitch in front of the new one. Share this post Link to post Share on other sites
ebinmaine 67,277 #6 Posted June 20, 2018 Well done sir 1 Share this post Link to post Share on other sites
Tankman 3,518 #7 Posted June 24, 2018 (edited) Many years ago, did the same add on for turning the earth. Only problem I had, the Horse reared up until I added weights, Duh! Also made a front bumper for suitcase weights. My sons loved the Horse so much, we had to round up a few more. Of course we did! Edited June 25, 2018 by Tankman 1 Share this post Link to post Share on other sites
TravelinJavelin 620 #8 Posted June 26, 2018 would like to find one of those plows for my 953! 1 Share this post Link to post Share on other sites
