Anglo Traction 761 #26 Posted June 27, 2018 Very fine job on the deck . Wish I could find one the same to fit on my 72 Raider 12 here in UK. Just out of curiosity, did you check the new genuine Blades for balance ?. I ask, as I found the WH ones for my 36" RD Deck were out and needed fettling. Share this post Link to post Share on other sites
Jrblanke 857 #27 Posted June 27, 2018 Where did you get all your bearings? Share this post Link to post Share on other sites
jeff lary 171 #28 Posted July 3, 2018 What a great looking job ! good work. Share this post Link to post Share on other sites
Farmerfred 0 #29 Posted January 7, 2020 Hey guys again I'm new here but I keep reading things every now and then. I've come to a point in my rebuild that I could use some help or direction at Least.... I am iso blades for my 33" rear discharge deck myself and have t had any luck around here. I'm out here in Rhode Island. I have #8014 & 52362 for blade kit. Am I close? Thanks a million!! Can also be reached at frediv655@yahoo.com Share this post Link to post Share on other sites
rjg854 11,350 #30 Posted January 7, 2020 Someone will be along who'll be able to answer your question. Thanks for the and good luck with your project Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #31 Posted January 8, 2020 Click on the picture 8014 2-blade set is only available from a Toro dealer Same 8014 blade set is used on the model 5-2362 mower deck. https://www.partstree.com/parts/toro-8014/ Are you sure it is a 36" width of cut deck as there is no 33"? The 32" deck uses a 8777 2-blade set that is no longer available. The 5-3322 deck also uses them. https://www.partstree.com/parts/toro-8777/ Garry Share this post Link to post Share on other sites
