richmondred01 2,238 #1 Posted May 26, 2018 Looking for everyone’s thoughts about installing a wheel horse electric lift on a 520-8. Share this post Link to post Share on other sites
953 nut 55,397 #2 Posted May 26, 2018 Lots of threads on here about how well people life the electric lifts, the picture below shows all tghe parts and pieces needed. Probably the most challenging part would be changing out the rockshaft. Put an ad in the classifieds, someone is bound to have one. 2 Share this post Link to post Share on other sites
Jerry77 1,218 #3 Posted May 26, 2018 46 minutes ago, 953 nut said: Probably the most challenging part would be changing out the rockshaft. if you are asking if I like the electric lift, the answer is yes...I bought my 516h because it had the lift..at my age the manual lift on my 314-8 had become too much..it is slow compared to the hydro lift, but it is precise in the level that you want...that coupled with the eaton 1100 that I got from you made a really nice wheel horse tractor for me.. 1 Share this post Link to post Share on other sites
richmondred01 2,238 #4 Posted May 26, 2018 (edited) I’ve got several electric lift kits and I’ve done the swaps before. My question is would I be doing an injustice or decreasing the value of a rather rare tractor by modifying it with parts that didn’t come with the tractor. Edited May 26, 2018 by richmondred01 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,073 #5 Posted May 26, 2018 Not at all because the 8-4227 lift kit was an option that could be added to the model. Look at the attachment list. Garry 2 Share this post Link to post Share on other sites
T-Mo-(Moderator) 4,507 #6 Posted May 26, 2018 If you have the 60 inch deck, my thought would be if the electric lift was powerful enough to lift it. Some electric lift requires helper springs, plus they're notoriously slow on some models of some brands. I'm not familiar with the Wheel Horse ones, so my experience/knowledge is limited. Share this post Link to post Share on other sites
richmondred01 2,238 #7 Posted May 26, 2018 (edited) Excellent point regarding the kit. Any 520-8 owners out there with a electric lift? ive got on on my 418 but that came factory. Edited May 26, 2018 by richmondred01 Share this post Link to post Share on other sites
SPINJIM 1,981 #8 Posted May 26, 2018 (edited) It depends a little on how much weight you want to lift with it. If you're lifting a deck or a small plow blade, it works great. The lifting height on mine doesn't seem to be as high as my hydro lift when using a plow blade. I tried a snow thrower on my 417-8 with electric lift, and it really strained to lift it, so I'm going to hydro lift for the snow thrower, and and electric lift for the blade. At one time, WH sold the electric lift as a complete kit for upgrading. My 417-8 was a retro-fit. Don't know if Toro still offers it. You will probably have to find a used cover plate for the left side because it sticks out farther to accommodate the electric actuator. Good luck. Jim Edited May 26, 2018 by SPINJIM additional info Share this post Link to post Share on other sites
midpack 866 #9 Posted May 26, 2018 10 hours ago, SPINJIM said: I tried a snow thrower on my 417-8 with electric lift, and it really strained to lift it I ran that same combination last winter (417-8 with electric lift) and it wasn't any different than when I had the snowthrower on a hydro lift Share this post Link to post Share on other sites
SPINJIM 1,981 #10 Posted May 26, 2018 2 minutes ago, midpack said: I ran that same combination last winter (417-8 with electric lift) and it wasn't any different than when I had the snowthrower on a hydro lift Maybe because I tried it for the 2-stage snowthrower that is much heavier. Share this post Link to post Share on other sites
timnlinda@sktc.net 4 #11 Posted November 11 where can i find this electric lift it, does anyone have it, ?? Share this post Link to post Share on other sites