By
ohiofarmer
20This is a marketplace find. There is a couple of guys who specialize in tongue and groove spruce boards and also pick up auction finds on occasion. They had several of these but this one was saved back for the owner. As they sell out very quickly he let me have this one he was saving for himself. It's rated for 660 pounds and lifts 65" The safety block is about nine inches shorter than that.
The table top is 40x 20.5 All kinds of greasable fittings. The wheels are cast iron and coated with Plastic. She's nice and tight with paint in good shape.
I sure wish I could find out the model and parts like the hydraulic pump. The plate with the specs had only ink applied and when I touched it to clean it up,the stuff was about gone.
I plan to make a larger cover table so I can pull a tractor cross ways on it to lift it up.
I have been a strong proponent for the Harbor Freight High position motor cycle lift which has been recalled. I will continue to use the three I have , but for other things. If anyone has taken my advice about the HFT lift and wants out, returning the hydraulic jack to HFT will result in your refund.
I have seen a big variation of pricing on these lifts from Amazon to Northern Hydraulics. Mine was very reasonable even when compared to the lower fier pricing
I will be back once the table build is complete.
By ohiofarmer