hydro engagement arm needed 418 A

[johnnymag3 2,523]

where can I find a new or used Hydro release arm? mine is ready to break in half as the idler pulley wore a groove out in it . Can I fix it? does anyone know where I can get a picture of how it is supposed to look before its all worn out? Thanks John.....

 

new here, as you can tell, unsure as to where to post things

By the way I forgot to mention the tractor type....oh boy

 

1987 418 A

Edited May 20, 2018 by johnnymag3
all confused

[pfrederi 17,887]

Parts manual is here  part is 110780 still available from Toro or

 Check with one of our vendors A to Z tractors  www.a-ztractor.com for a used replacement

 

[johnnymag3 2,523]

Thanks, I knew someone here was way smarter than me  !!!!!

[953 nut 55,845]

              Lots of good folks here, keep us posted on your progress.

[johnnymag3 2,523]

Will do !!!!

I have been around Wheel horse Tractors all my life, and spent a lot of time here looking things up.Its an awesome site, with a lot of wonderful people.

 

Make America GREAT Again !!!!

Thank you veterans!!

 

[GREYGHOST 65]

Johnny. There sure are allot of Good Guys here. With LOTS of Knowledge & Experience with the Horse.

[johnnymag3 2,523]

Thanks for the help guys. A welder at my day job laughed at me, and said give me that arm!

 

He welded a nice smooth area where the idler had worn out a big oval in the arm, then he used a dremel to make it look and work like brand new....

 

I buffed it out, and the thing works great, no more rattles ! Nothing like OEM he said, metal is better than what you can get today

 

THANK YOU RED SQUARE !!!!!

 

John

[johnnymag3 2,523]

HAPPY MEMORIAL DAY EVERYONE !!!!

[squonk 41,372]

1 hour ago, johnnymag3 said:

Thanks for the help guys. A welder at my day job laughed at me, and said give me that arm!

 

He welded a nice smooth area where the idler had worn out a big oval in the arm, then he used a dremel to make it look and work like brand new....

 

I buffed it out, and the thing works great, no more rattles ! Nothing like OEM he said, metal is better than what you can get today

 

THANK YOU RED SQUARE !!!!!

 

John

I've had 2 fixed where the hinge pin wears out. Guy cuts off the old pin and welds on a new one. Weld the oblong pin hole shut and drills a new hole to fit the pin.

[johnnymag3 2,523]

nobody knows where to get a set of dust covers for a pair of front axles on a 418 A? 8" wheels....

[953 nut 55,845]

Glen Pettit is the sole supplier of these and is recuperating . You may be able to come up with a food container cover that will fit, seem to recall someone here using a coffee creamer product cap.