Hub Puller?

[hunterguy92 17]

Well the time has come for all new tranny seals..

 

Is anyone making a hub puller or have a 5-lug hub sitting around? I've done some searching but to no avail..

I really don't want to use a 3-jaw puller and risk breaking a hub. What does everyone use that's readily available?

[daveoman1966 3,762]

got an old hub...if so, try this setup

[953 nut 55,836]

If you have a bottle jack, some 3/8" all-thread and an old hub you can do this.

 

[ohiofarmer 3,276]

 If you do not have an extra hub, an automotive brake rotor can be drilled.  I have some brake rotors that are close enough that just enlarging a previously factory hole or two is all it takes.

 

Great pictures,you guys

[953 nut 55,836]

6 minutes ago, ohiofarmer said:

an automotive brake rotor can be drilled.

      Great idea, the Ford/MoPar five hole 4 1/2" bolt patern is the same as the .

[Mike'sHorseBarn 3,014]

7 hours ago, daveoman1966 said:

got an old hub...if so, try this setup

 

 

 

1 hour ago, 953 nut said:

If you have a bottle jack, some 3/8" all-thread and an old hub you can do this.

 

 

 

I'm stealing both of your ideas!  

[meadowfield 2,595]

9 hours ago, Mike'sHorseBarn said:

 

 

 

I'm stealing both of your ideas!  

 

That bottle jack looks familiar... as does that workshop... 

[953 nut 55,836]

1 hour ago, meadowfield said:

That bottle jack looks familiar... as does that workshop.

I was so impressed with the puller that I saved the image, but couldn't remember who to credit for the idea. I have now rectified that shortcoming!

[jeff lary 171]

Love the homemade gear pullers both look great and very good information to have.