40in midmount grader blade

[Chris G 3,296]

So I picked up these parts to a 40 in midmount blade. I believe it's a MB405 model. But not exact. So if anyone has some pics of what is missing and any info on this it would be great. 

[gwest_ca-(File Mod) 11,033]

Click on the picture

Garry

[953 nut 55,078]

This WIKI I did a couple years back should be helpful.

 

[CasualObserver 3,408]

Pretty sure that frame bracket is from a round hood Lawn Ranger front blade, not the mid mount blade. So all you got is the belly blade itself.

 

 

[littleredrider 409]

I think that bracket is the same for the ranger snow blade and grader blade. I was looking at manuals years ago and thought they were at least. 

[CasualObserver 3,408]

They're similar, but definitely different. I have both.  I assume the big part was probably formed on the same tooling, but the tubes and mounting points on each are different. If I can get to them in the next few days I'll lay them out side by side unless someone else can get to it first.

[Chris G 3,296]

14 hours ago, CasualObserver said:

Pretty sure that frame bracket is from a round hood Lawn Ranger front blade

After some research I agree. Definitely for a lawn ranger. I'll have to check around were I picked it up at and see if it's there somewhere or just build one.

[CasualObserver 3,408]

4 minutes ago, Chris G said:

I'll have to check around were I picked it up at and see if it's there somewhere

 

Hopefully you can find more parts to at least one of the two attachments... or better yet, the rest of both of them!  

[Lane Ranger 10,946]

That is what is on my 1963  Wheel Horse 603 !

 

[CasualObserver 3,408]

I know you've got your answer @Chris G but so you can see the missing pieces and for others and future searches heres a few pics of the two different blades. 

 

 

 

 

 

 

 

[Chris G 3,296]

I appreciate that. Gives me a better idea of what exactly to look for.