Jump to content
wh315-8

ST323 or 324 need measurements for control rods

By wh315-8, in Implements and Attachments

Recommended Posts

wh315-8    458

wh315-8
Posted

Just recently purchased a 1964 34R and a separate deal landed a Snow Thrower, believe it to be a ST323 maybe a 324. It does not have the idler pulley. I did find posts for measurements on the pulley arm for Ranger. I need close up pics of the ends of the clutch rod and the crank rod as well as measurements so that I can fab these parts. Or if anyone has these parts for sale I would be interested.

Share this post

Link to post
Share on other sites
 

pfrederi    17,539

pfrederi
Posted

The crank rod is 1/2" stock.  32" from front end to the bend the 2.5 inch offset and 4 inch tail

 

The clutch rod is 3/8" stock 28 inches long. it is 16inches from the front to the tab that catches the bracket and keep it engaged the end is flattened and a rivet lie thing welded in with a cotter pin on the oter side.

 

 

IMG_0183.JPG.b3de7d151870a68b33bc2471fc52e080.JPGIMG_0184.JPG.52a7e0a6a081a196066b0bff3add588b.JPGIMG_2560.JPG.b7ecf9235537a6824d7e59702e50e4bf.JPGIMG_2561.JPG.c3d4f455af8b6afb8314a2b330287e8d.JPG

Share this post

Link to post
Share on other sites
 

wh315-8    458

wh315-8
Posted

Thank You for the Detailed information, just what I needed.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • PWL216
      Two-Stage Snow Thrower
      By PWL216
      Selling a two stage snow thrower in very good condition. Works great. Comes with small box of new in-package parts. Can deliver to Zagray.





    • BobandJamie Raay
      417a 400 Garden Series Tractor (1986) 42" decks w attachments: mulching deck, snow thrower and trac vac
      By BobandJamie Raay
      400 Series WheelHorse Garden Tractor w 42" deck in good condition. Has a frame issue under the seat (needs welding) but runs well. 17-horse Kohler engine on tractor.
      Extra rear discharge mulching deck (42"), extra set of blades for mulching deck and side discharge deck,  snow thrower (42" with 20" chute) and trac vac with 5.5 horse Honda engine in good, working condition as well. All 4 hubcaps are included (rear not in tractor picture but see additional pic). Original paperwork, including owner's manual on all. Includes chains for snow traction and weight attachments for each wheel. All have been used at the same property since purchase and have been stored indoors throughout. Thanks for looking! 
       
       
       
       

       












       
       

    • Matt_8
      Does anyone know what wheel weights i would use for this?
      By Matt_8
      I was wondering if anyone knew what wheel weights i would use for my lawn ranger on stock wheels three lug pattern

    • Matt_8
      New fender pan for my 67 lawn ranger
      By Matt_8
      I just bought a 1967 WH lawn ranger and i was wondering the best place to find a rear fender pan

    • D_Mac
      My Little Pony
      By D_Mac
      So.... I just got home with this. I been wanting to fix one up for my 9 yr old nephew. I need to do it in a hurry as I will be going in hospitol soon for my 3rd battle with cancer. You know the story. Was told it ran about a month or so ago. Not running now. I just got home with it so I haven't checked it out yet. Have never owned a Lawn Ranger before, and know nothing about them. Maybe you guys can tell me what I have here and any advice would be helpful as well. Seems to be complete with the exception of the seat. Going to need to pick one up somewhere. 






×
×
  • Create New...