clueless 2,976 #1 Posted April 26, 2018 Just got a couple of OEM wheels and shoulder bolts for my 1997 36"rd deck, the old ones just had the bolt the wheel and the nut, no washers, I have two other 36"rd and two 36sd deck, all four are from the mid '70s thru the early '80s, I also have a 1988 37" sd, they all have washer in some configuration, only two with the same set up. I have a parts diagram for the 1997, Md.78305, it shows no washer, I have a parts diagram for the late '70s deck, shows two special washer on each wheel. Anyone know why the difference, and am I over think this again, and just use the bolt and nut, like shown in the '97 parts diagram? Share this post Link to post Share on other sites
953 nut 55,081 #2 Posted April 26, 2018 I would use a washer or two to take up any slop or play, otherwise no need. 1 1 Share this post Link to post Share on other sites
Anglo Traction 761 #3 Posted April 27, 2018 . 20 hours ago, clueless said: ............ Anyone know why the difference, and am I over think this again, and just use the bolt and nut, like shown in the '97 parts diagram? Would the examples with no Washers have Plastic Wheels/Nylon Bushings?. Not sure when they went Plastic, or it could be the Toro 'Bean Counters' influencing Design/Ass'y . Share this post Link to post Share on other sites
