Raider 10 6-speed

[Sandrion 1]

Needing to know the diameter of the transmission pulley. I work at an industrial supply house so getting the correct thing is easy if I know the diameter. I think someone replaced mine at some point, as it was for an A-belt and not a b-belt.

 

Thanks!

[gwest_ca-(File Mod) 11,101]

The original 7492 pulley was replaced by 106165.

6-1/2" OD with 5/8" bore.

 

Garry

[Sandrion 1]

Thanks! I pulled one off the shelf, and grabbed a belt too. B79K (Kevlar). Hopefully this will solve the slipping belt issue.

[KC9KAS 4,741]

@Sandrion  to 

[Digger 66 3,488]

                    

[953 nut 55,836]

         Always good to have an industrial supply man around, we sometimes need a bit of guidance on hardware items.

[Sandrion 1]

15 hours ago, 953 nut said:

         Always good to have an industrial supply man around, we sometimes need a bit of guidance on hardware items.

Thanks! Lots of good information here from what I saw when I browsed a couple threads. I wound up with this tractor after I fixed it for a guy and he never came to pick it up. I can't, in good conscience, sell it, so I just use it around the yard...