Mr. Foxxx 18 #1 Posted April 4, 2018 My 36" tiller developed a leak last year out of the left seal. I want to split the case and replace the seal. I obviously will need the gasket for the two sides as well. Is there anything special that I need to watch when splitting the tiller? Share this post Link to post Share on other sites
Lane Ranger 10,945 #2 Posted April 4, 2018 (edited) Two seals on most tillers on tine hubs. They can be changed from outside case - no splitting of case needed! Some of the earlier tillers I think had only one seal on outside. Most models have two. Lowell S. (wheelhorseman1000) sells in vendor section (new seals)! IMG_1321.HEIC IMG_1574.HEIC IMG_1672.HEIC IMG_1696.HEIC Edited April 4, 2018 by Lane Ranger Share this post Link to post Share on other sites
