wessex horse 15 #1 Posted March 25, 2018 Can anyone point me to a post here detailing dismantling and overhaul of mower deck spindles please? Have looked, can't find one TIA Share this post Link to post Share on other sites
daveoman1966 3,745 #2 Posted March 25, 2018 There are a dozen or more spindle types / styles. Which one is yours... there is an ID tag on your mower deck. What is that number? There are 36, 37, 42,48, and 60" mpower decks...not all the same. Share this post Link to post Share on other sites
wessex horse 15 #3 Posted March 25, 2018 Mine is a 36 inch deck, any tags are long gone Share this post Link to post Share on other sites
Anglo Traction 761 #4 Posted March 25, 2018 1970s Rear Discharge example any good?- -LINK- Share this post Link to post Share on other sites
wessex horse 15 #5 Posted March 25, 2018 Hi thanks, yes just like the example in the first photo, the rest of the thread just about answers all my questions. I wish I had not read all of it though, as your standard of work makes me down-hearted, especially the welding......I will not be posting pics of mine. I slap the odd bit of red paint on now and again, but it lives outside and has a tendency to go green all over in between the rusty bits. I love it when I have to help out my john Deere owning neighbour when his stops working...............again, the look on his face says it all. 1 3 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,032 #6 Posted March 25, 2018 This may help you identify the deck you have. Listed in the order they were produced. 75-36XR01 replaces 5-0620, 5-0621, 5-0622, 65-36XR01 75-36XR01 replaced by 75-36XR02, 85-36MR01, 95-36MR00 (Blades up to this point have the 5/8" x 3/4" double-D center hole) (The following decks used blades with a 3/4" center hole) 95-36MR01, 05-36MR01, 05-36MR02, 05-36MR03, 05-36MR04, 05-36MR05/78305 Garry Share this post Link to post Share on other sites
