2018 Big Show Buy/Sell/Trade Thread HERE!!

[stevebo-(Moderator) 8,333]

Also looking for an RJ drive belt guard. 

[BIGGS 5]

A and B..just one, A

[PeacemakerJack 10,738]

 

good morning guys!  We are getting really close to the Big Show.  I’m really looking forward to meeting so many of you. I have still not received any help in getting this tractor from East Hanover to the BS.  I really would like to purchase this for Coulter Caleb for his 14th Birthday which is on the Thursday of the show. It would be a really cool gift for him.  As I’ve stated before, if you can do it, I’d be happy to pay for your fuel and time.  I have a ride for it back to WI on @WHX19‘s trailer but just need to get it that first leg.  Please pm me if you think it’s somethig that you might be able to do for me/us. 

[squonk 41,171]

K301 that needs rebuilding. This is the original motor off of Skonk. No noises and did not smoke. But for some reason oil was getting into the combustion chamber and fouling the plug rather quickly. will NOT come with fuel pump or carb. This was a starter/gen model so no charging stator. Head is off a newer 14 HP so the bosses for the head bolts are lower. What you see is what you get. $75.00 Will bring if paid for in advance.

 

 

[stevebo-(Moderator) 8,333]

I hate to say that I parted a Magnum 312-8 that someone felt like spray painting red white and blue. If anyone needs anything off it let me know. Seat is shot, rear tires and rims accounted for but has 8 speed, complete motor and tins and all the other stuff. 

[dells68 7,498]

Ok, I've been thinking about my rat rod and B80.  I really hate to part with either one, but I'm all out of horse stalls!  I had originally listed the rat rod as a roller with no engine.  I'll sell it one of two ways:

-Rat Rod - Sold

I'd take $350 for the B80 without the mid-grader (does include nice sleeve hitch)

Might possibly sell my 857 if paid for in advance $500 firm (my I don't want to sell it price, but I'm out of room) - smokes just a little on start up for about 45sec or so, will come with different seat - not the seat and springs shown here.

Edited June 10, 2018 by dells68

[19richie66 17,508]

Im just putting this here so I don’t forget anything. 

 

tires &wheels - kyle (fast88)

sign - jim (elcamino/wheelhorse)

kt17 - 953nut

Gt14 hydro pumps - jeremy (pj38)

regulator and ammeter- bob (racingbob)

1056 belt guard/deck lift - craig (amcrules)

D series linkage & misc parts - mark(D-man)

 

 

 

 

Edited June 6, 2018 by 19richie66

[squonk 41,171]

I'll have enough in materials to make a total of 5 single cyl Kohler spark plug wires. I won't make them in advance in case I need the terminals for a different application. Takes like 5 min to make one so If you need any $6.00ea. 

[WHX?? 48,853]

I'll take one fer sure Mike.

[AMC RULES 37,133]

DITTO, for sure.

[squonk 41,171]

13 minutes ago, AMC RULES said:

DITTO, for sure.

I'll trade you for a 1075! 

[squonk 41,171]

18 minutes ago, WHX19 said:

I'll take one fer sure Mike.

I may need to buy more parts.  Go figure. My Napa store stocks the terminals and boots but no wire! 

[Aldon 4,826]

Count me in Mike. I’ll take it along with the fender pan.

[19richie66 17,508]

Short frame plow for sale with axle bracket. $80 obo not sure if I have the handle. 

Electric start Kohler 8hp. I haven’t ran it but plan on trying this weekend. Has compression when spun over by hand. Got it for a project and it has just been sitting in my shed.  $150 obo

[Jrblanke 857]

Hey guys,

I am a little late to the game here, but I have worked it out with my boss to be able to come to THE BIG SHOW. I will have to cover at my work EITHER Friday or Saturday. I won't know until the week of the show, but when I do I'll let y'all know. 

 

With that being said, I have this 418-8 speed for sale. I only want to bring it to the show if I have a buyer committed to it. Price is $650 OBO WITH the new battery and tires. (Sale I pending) Here are the details:

 

418-8

New oil temp sender

Lubrication Engineers synthetic oil. 

I have ordered new front turf tires

It will have a new napa battery

1148 hours

Electric lift works great

Paint looks like it was polished a little bit too hard or something. 

Seat is nice with no rips or tears, it just needs the edge piece glued back on. 

The test lights do not work, neither do the headlights and tail lights. 

Parking break works great

Steering is tight for such a front heavy tractor. 

Rear tires hold air great

The only time I see any engine smoke is when the tractor idles for more than 2 minutes and I raise the throttle to full throttle. 

 

Here is the walk around video:

 

And here is where I am attempting to show the smoke during rev. Skip to 41 seconds to see what I am referring to. 

 

Edited June 10, 2018 by Jrblanke
Marked listing as sale pending

[squonk 41,171]

I got more wires and terminals so I don't run out. Could someone take a measurement of a nut roaster wire? I have the lengths of a K with the coil up high on the shroud like a C-160 and down low like on a 701. I need this measurement in case someone wants a wire and they don't have the old one with them. Thanks.  

[brandon701 20]

Bring a restored B-80 to the show that will be for sale. Pm me if you want pictures. 

 

Possible bring a restored bronco 14 as well to sell

[12 hp Kohler 1,014]

I will be bring a 1971 800 special to the show. It runs and drives, slips out of 3rd gear sometimes. Has a Briggs 8hp and a peerless rear. It needs some work but it’s mostly all there. Doesn’t include a battery and needs a new front tire. Pm me if anyone wants it. 

[stevebo-(Moderator) 8,333]

Some items I will bring pre sold or not and others only it sold. 

Kohler Mag 12. Complete (I have the plastic air cleaner cover as well). Hit with carb cleaner and fire right off. Have not run on machine. $300 SALE PENDING 

8 speed tranny that looks to have one of the input shaft seals slight leak but complete and seems to shift fine. $150 SALE PENDING 

Onan muffler with quick paint job. Should be blasted and painted. $75

420 LSE leather seat $400- SEAT SOLD 

 

[tunahead72 2,424]

On June 5, 2018 at 5:23 PM, squonk said:

I'll have enough in materials to make a total of 5 single cyl Kohler spark plug wires. I won't make them in advance in case I need the terminals for a different application. Takes like 5 min to make one so If you need any $6.00ea. 

 

I'll take one for sure Mike, and I'd especially like to watch you make it if possible. I'll be there Friday. Thanks for doing these!

[ricksrj58 273]

here is a list of tractors that i will be bringing to sell. tractors are not being sold with the decks.  

 1277 hydro,engine seized,good tires $150. also have the 48" deck. 

 charger 12 hydro,engine has a broken rod,good tires $150 also have the 42" deck.

 1055,engine turns over and should run with some tlc,good tires $250. also have the 48"deck

  early D160 missing the kohler engine,15"rear tires.this is a good parts machine $200. also have the 48"deck for it.

  c-81 former pulling tractor repowered with a 12 horse kohler,nice paint and new decals.$400

  518-h looks and runs nice,has good tires but needs a new seat.$650

  backrest for a round hood tractor.missing the cushion$20 SOLD

  3 point hitch for a D series tractor $350

  k341 kohler parts engine.$100

  k181s,no starter/generator or fuel pump.PO said engine locked up while mowing.

  tecumseh h60 that should run.$50

  short frame snowplow $100

  front frame mount for a mackissic shredder

  also have a trailblazer 5 and a trailblazer 7 self propelled snowblowers,the 7 runs and looks decent,the 5 is a little rough looking.$125 for both.if anyone is really interested in them i can bring them along.

thats all for now. 

   

Edited June 8, 2018 by ricksrj58

[Tgtack 779]

I have a 401/551 hood in bare steel. Not the best of shape, but repairable. Condition can be seen in the pics. No tank straps as usual. $50, will deliver to show.

[Lane Ranger 10,974]

I also can bring two items some people might be interested in.     

An RJ Idler/clutch arm with original 2 inch pulley.  Works fine.   Remove the roll pin to install on your RJ transmission.  $30   THE RJ Idler/Clutch Rod and Pulley is SOLD !

 

 

 

 

 

 

A 953/1054  Hein-Werner hydro pump  with new spring, O ring and 1/2 inch shaft seal.    $75    THE PUMP IS SOLD.

 

 

 

 

RJ Idler/Clutch are and Hein-Werner Pump Are Both SOLD !

 

Edited June 10, 2018 by Lane Ranger

[Lane Ranger 10,974]

 

 

Two other items I can bring to the Big Show if someone is interesting in buying them!

 

1)   Set of the older type  48 inch  spindles  (they are good)  with two of the cast pullies.  (one  two race for the center and one single race).  $50  for all.      The spindles and pullies are SOLD.

 

 

 

 

 

 

 

 

 

2)  Two older Hein -Werner parts  for HY 2/HY3  (or the front gear piece could be used for  953/1054 type pumps)  .  NOTE:   The rod on the  gear assembly is longer than  HY 2 or HY 3 pump housings as this was off an very early 953  pump with a one inch longer pu mp fluid housing.       Front Assembly gear and  piston.    Piston on right is from 953/1054 and NOT FOR SALE.    Piston  on left is the HY2/HY3 type with the screw in rod handle  (see hole) .    $50  for the two pump parts.

 

 

 

 

Edited June 10, 2018 by Lane Ranger

[Aldon 4,826]

16hp sold

16x7.58 tires and tubes sold

Ag tire set sold

Tub Cart -Sold

 

 

A few more items I can bring if paid for..

2 sets of 23x10.5-12 tires. Ag’s on custom welded rims. Turfs on Sears rims I believe. The latter rims were completely sandblasted and painted before installing tubes and tires last year. 175 per pair

 

16x7.5-8 tires and tubes. These held air when I removed them. But no guarantees as they have sat on shelf for a year. SOLD

 

Tub cart. Has some rust through spots $75 which I gave for it. SOLD

 

Engines. May be missing points and the pin that drive, condenser and coil....they will be as in pics. I don’t have time to answer questions regarding the engines other than below

 

16hp Kohler. Ran but had a slight knock. Last I ran it was two summers ago. Had picked it up, tried it, then pulled it off as it had slight knock with intention to rebuild. Sold

 

k161 picked it up and have never messed with it. But I think it would fire but not stay started. $125.00

 

k321 block - had a knock. I know this is missing shrounds and points etc. $30.00

 

 

Edited June 12, 2018 by Aldon