Ed Kennell 38,748 #1 Posted March 13, 2018 OK, I know it's an open end wrench, but I'm sure it has a specific use. Flywheel nut, crankshaft lock, ???? Share this post Link to post Share on other sites
953 nut 55,909 #2 Posted March 13, 2018 Fits the hex fitting on the mower spindles, can't remember the year but some had that big hex. 5 1 Share this post Link to post Share on other sites
WHX?? 49,193 #3 Posted March 13, 2018 I have no clue so I'll go the other way on this ...meant to be tacked on to a shift lever for a custom rat rod??? 1 3 1 Share this post Link to post Share on other sites
Ed Kennell 38,748 #4 Posted March 13, 2018 OK, now we know what it was designed to be used for and what it could also be used for. Now, how rare is this wrench? 1 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,357 #5 Posted March 13, 2018 Never seen one so in my case extremely rare. Where did you find it ? 1 Share this post Link to post Share on other sites
dcrage 628 #6 Posted March 13, 2018 Isn’t that one of the ‘thin’ Wheel Horse wrenches especially designed/made to fit the nut above the blades on decks like the late 80s early 90s 42” SD? For removing these blades for sharpening, etc. 2 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,107 #7 Posted March 13, 2018 Item 40 on this page http://www.partstree.com/parts/toro/mower-deck-assemblies/15-48sc02-toro-48-side-discharge-mower-deck-1990/rear-side-discharge-mower-42-48-in-107-122-cm-vehicle-indentification-number-15-42sc02-15-48sc02/ Part number 114647 Garry 1 Share this post Link to post Share on other sites
Racinbob 11,251 #8 Posted March 13, 2018 They aren't too rare. Several are listed on Ebay and I know of a member here that had several for sale. Definitely handy but really not much of a wrench with the skinny handle. I had one before the Florida move but opted to mill down the open end of a combination wrench to do the job now. 1 Share this post Link to post Share on other sites
Ed Kennell 38,748 #9 Posted March 13, 2018 The wrench was given to me by my neighbor yesterday. He purchased it at an auction on Saturday. Guess I better go plow his driveway this morning. We got about 4" last night. Thanks for all the info. 1 Share this post Link to post Share on other sites
clueless 3,012 #10 Posted March 13, 2018 Ebay, $20.00 - 40.00. Got one, keep it in the truck tool box, use it to change the hitch ball. 1 Share this post Link to post Share on other sites
