LAWN RANGER SEAT

[dells68 7,498]

Don't for get Dells68 the slits go down on the frame.  and the angled cut on the bottom goes to the back against the back rest. I'm glade you like it.

 

Gotcha Bob!  I just laid them out and wanted to show the amount of care and thought you had put in.  Guess I should have flipped them over, but then no one would have seen the pads are even cut to allow them to follow the contour of the pan.  Again, I'm thrilled with the cover and pads!  I know we've probably met at the show in the past, but I e got to make sure to look you up this year!!

[BOB ELLISON 2,981]

@dells68 I've only been to 1 Big Show and that was last year. I tried to meet as many as I could but me being a newbie I didn't know anyone except 953nut, squonk, Ed Kennell. I sat with Richard and he helped my with some of the names. But I going to make this year if the creek don't rise. And yes look me up there.

 

[BOB ELLISON 2,981]

Well @953 nut I think I got it Richard. I want out in the garage and checked out the 1054 seat patterns that  I made. I checked them and I did make the  back just to see if it would be ok and it looks good. Tomorrow I'll make the seat . I have the wood for both Back and seat but I never did make the wedges for the seat. I just never got around to splitting a 2x4. I do know there's a lot more material in the 1054 and a lot more sewing. I did a different type seam on this back and I like it see if you can spot it.

[953 nut 56,165]

1 hour ago, BOB ELLISON said:

I never did make the wedges for the seat. I just never got around to splitting a 2x4

I know that @Lane Ranger used wood wedges but the original seat had foam wedges. I an sending you a PM with dimensions on them. Seat back foam also had foam wedges built in.

 

[BOB ELLISON 2,981]

Yes I see that.  mine had the wood. But that would be easy to do it with the foam. That seat looks like it was made before they discovered wood. haha

But I need a pic of the fabric or the finished back.  Maybe someone has one.  I know the fabric is stapled but is it covered to hide the staples. I'm going to have to go into my computer and search for all the pictures I took of my old 1054 seat. Maybe I have a good picture but I don't think so.

[Lane Ranger 11,029]

The original 953 seats did have the wooden wedges. Foam wedges came later on.

 

 

 

[953 nut 56,165]

13 minutes ago, Lane Ranger said:

The original 953 seats did have the wooden wedges. Foam wedges came later on.

 

 

 

No telling what they may have been doing day to day. The serial number on the 953 the seat came from is 62-829. 

[Lane Ranger 11,029]

Mine was 62-560

Edited March 9, 2018 by Lane Ranger

[ACman 7,624]

Just received my seat cover from Bob .... the craftsmanship is outstanding  ! 

 

Edited March 9, 2018 by ACman

[953 nut 56,165]

              Got my new @BOB ELLISON seat cover this afternoon and couldn't wait to put it on the 1055.

             Now I have , the seat looks so good I will have to paint the               

Thanks Bob, it fits like a glove!

[AMC RULES 37,141]

Arrived today Bob...

         

[953 nut 56,165]

On 3/8/2018 at 12:29 PM, dells68 said:

I got my cover and padding from @BOB ELLISON this morning.  Wow!!!!!  It looks awesome right out of the box!!  I don't have my seat pan here to fit it to, so I'll have to post pics later on

          Dell, did you get around to installing the seat cover?       

[dells68 7,498]

Not yet Richard.  It's been a crazy week or so.  I do have the pan in the back of my truck.  Won't get a chance tonight since Emory has Trail Life tonight.  We do pick his cart up tomorrow.  He bought it from @limited12 at the show last summer.  I'm having it Rhino Lined for his birthday next week.