Handy Don 12,225 #15126 Posted March 30, 2022 11 minutes ago, Wheelhorse#1 said: lawn aerator NICE rock you got there! 3 Share this post Link to post Share on other sites
Wheelhorse#1 1,657 #15127 Posted March 30, 2022 15 minutes ago, Handy Don said: NICE rock you got there! Thanks ,Probably overkill but it works😆 2 Share this post Link to post Share on other sites
Horse Newbie 7,069 #15128 Posted March 30, 2022 That aerator “rocks.” 1 4 Share this post Link to post Share on other sites
ebinmaine 67,494 #15129 Posted March 30, 2022 7 hours ago, Wheelhorse#1 said: Hooked up the lawn airator that I purchased on the cheap a couple weeks ago. Ran it around the back 40 a few times.I was skeptical,it did the job.The grass and weeds should appreciate it,the worms,not so much. Why not the worms? You screw up their house entrances? 1 Share this post Link to post Share on other sites
ebinmaine 67,494 #15130 Posted March 30, 2022 (edited) 7 hours ago, Wheelhorse#1 said: Never you mind this here double post.... 😂 Edited March 30, 2022 by ebinmaine Double post repair session Share this post Link to post Share on other sites
ranger 1,750 #15131 Posted March 30, 2022 (edited) 13 hours ago, Wheelhorse#1 said: Hooked up the lawn airator that I purchased on the cheap a couple weeks ago. Ran it around the back 40 a few times.I was skeptical,it did the job.The grass and weeds should appreciate it,the worms,not so much. Can’t beat it for improving the grazing yield. My aerator doesn’t really need any extra weight🏋️ to get it to sink it’s teeth in. Edited March 30, 2022 by ranger 10 1 Share this post Link to post Share on other sites
sjoemie himself 3,068 #15132 Posted March 30, 2022 My goodness. That looks more like some weapon of war than a garden tool 3 hours ago, ranger said: Can’t beat it for improving the grazing yield. My aerator doesn’t really need any extra weight🏋️♂️to get it to sink it’s teeth in. 2 1 5 Share this post Link to post Share on other sites
ranger 1,750 #15133 Posted March 30, 2022 1 hour ago, sjoemie himself said: My goodness. That looks more like some weapon of war than a garden tool C121 pulls it no problem, although I could do with a pair of ‘Transport’ ’ wheels on the back, so I can lift to transfer weight onto the ‘Horse’s’ rear end, for extra traction when the paddocks are on the ‘wet’ side! At the moment I’m just pulling a dead weight. 3 Share this post Link to post Share on other sites
Lane Ranger 10,968 #15134 Posted March 31, 2022 I changed the head and head gasket changed on my 754 Wheel Horse yesterday. The old head had a problem - only a couple threads still in the spark plug hole and the head gasket was leaking. I bought this in Florida and my friend Rodney Burger had a replacement head that I used. Bought some new grade 8 bolts for the head and torqued them down with 15 to 20 ponds torque as specified by Kohler. Adjusted carb a little after putting on the air cleaner and my hood. I ran it around and she runs great for a 58 year old tractor. It has a special brass door knob shifter too! Newark Board of Education in Essex County. 5 6 Share this post Link to post Share on other sites
Handy Don 12,225 #15135 Posted March 31, 2022 26 minutes ago, Lane Ranger said: Glad to see it's "back on its wheels" Was about to ask which door is missing its doorknob, but thought better of it.... 2 3 1 Share this post Link to post Share on other sites
Fishroe 261 #15136 Posted March 31, 2022 (edited) Went to Tractor Supply today to get chicken feed and I always do a drive by in the small engine section. Well they had 3 tractor seats sale price tag on the shelf 109.99 got to register and it rung up 129.00 cashier got the manager. She let me have it for sale price then ripped the tag off shelf. Then cashier said I had a $10 credit. So everything worked out good. $99 is still high I think Got tired of looking at this ugly seat. Lights have been blinking in the house. Storms coming up the east coast a couple tornado warnings 40 miles north of me Dont want to see that Edited March 31, 2022 by Fishroe 13 4 Share this post Link to post Share on other sites
Maxwell-8 4,275 #15137 Posted March 31, 2022 And I got into some trannys stuff today. A spare transmission I had laying around with welded on hubs. A real struggle getting those of. After all that grinding, they looked horrible, but cleaned them up as good as I could Of course, in the progress the c clip on the axle inside the tranny came loose. So I had to open it. 5 5 Share this post Link to post Share on other sites
Horse Newbie 7,069 #15138 Posted March 31, 2022 (edited) 40 minutes ago, Fishroe said: Well they had 3 tractor seats sale price tag on the shelf 109.99 got to register and it rung up 129.00 There have been stories down south about price gouging… An Ace Hardware got in trouble down here in Indian Trail NC… things were one price on the shelf and rang up more at the register… average $50 to $80 per purchase… The funny thing is a lot of the items were stuff that’s been hard to get, like Rustoleum Regal Red, Rustoleum Farm Eguipment Yellow, Rustoleum Farm Equipment Green… makes me wonder… Beware when you shop ! Edited March 31, 2022 by Horse Newbie 2 2 Share this post Link to post Share on other sites
WHX?? 48,815 #15139 Posted March 31, 2022 17 minutes ago, Horse Newbie said: about price gouging… What it is around here is they can't find help. Somebody's gotta go around and change the price thingys and the store manager told me new hires don't quite catch on if they can even find a new hire. 1 2 Share this post Link to post Share on other sites
Ed Kennell 38,173 #15140 Posted March 31, 2022 25 minutes ago, Horse Newbie said: price gouging… No gouging here....I'm paying the same for a package of burger as I did a year ago. 1 18 Share this post Link to post Share on other sites
JoeM 7,874 #15141 Posted March 31, 2022 Nice Pic Lane! That knob is cool too! (but the only old board of education I remember had holes drilled in it) 1 3 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #15142 Posted March 31, 2022 33 minutes ago, WHX?? said: What it is around here is they can't find help. Somebody's gotta go around and change the price thingys and the store manager told me new hires don't quite catch on if they can even find a new hire. Well they have said that here too … Share this post Link to post Share on other sites
squonk 41,111 #15143 Posted March 31, 2022 (edited) 1 hour ago, WHX?? said: What it is around here is they can't find help. Somebody's gotta go around and change the price thingys and the store manager told me new hires don't quite catch on if they can even find a new hire. Exactly. Prices change so fast it's almost a full time job just doing the labels and it's crap job to boot! Edited March 31, 2022 by squonk 2 Share this post Link to post Share on other sites
sjoemie himself 3,068 #15144 Posted March 31, 2022 1 hour ago, Maxwell-8 said: If it bothers you that they're a little boogered-up you can send them my way and i'll skim them on the lathe for you. If you take care of shipping costs i'll do it for 2 4 1 Share this post Link to post Share on other sites
Handy Don 12,225 #15145 Posted March 31, 2022 2 hours ago, Maxwell-8 said: Of course, in the progress the c clip on the axle inside the tranny came loose. So I had to open it. I can see a dent in the big axle bearing inner race and outer housing. Not sure what would cause it but please make sure it isn't affecting the bearing's rotation. 2 Share this post Link to post Share on other sites
sjoemie himself 3,068 #15146 Posted March 31, 2022 You sure that's not just the reflection in the picture Don? 2 Share this post Link to post Share on other sites
Handy Don 12,225 #15147 Posted March 31, 2022 23 minutes ago, sjoemie himself said: You sure that's not just the reflection in the picture Don? By jove, you're right! Sorry for the false alarm! 2 1 Share this post Link to post Share on other sites
Lane Ranger 10,968 #15148 Posted March 31, 2022 2 hours ago, Handy Don said: I can see a dent in the big axle bearing inner race and outer housing. Not sure what would cause it but please make sure it isn't affecting the bearing's rotation. i have a couple more ! Both old brass specialty door knobs! 4 5 Share this post Link to post Share on other sites
Horse Newbie 7,069 #15149 Posted April 1, 2022 3 hours ago, squonk said: and it's crap job to boot! Better than cleaning the crapper… a friend of mine was thinking about coming out of retirement and maybe working at O’Reilly’s or Auto Zone, but crapper detail and closing up every night, plus weekends has him taking a pause… 1 Share this post Link to post Share on other sites
WHX?? 48,815 #15150 Posted April 1, 2022 4 hours ago, sjoemie himself said: If it bothers you that they're a little boogered-up you can send them my way and i'll skim them on the lathe for you. If you take care of shipping costs i'll do it for Gives me a thought @Maxwell-8.. ever run into it again just grind one side off. Then you can disassemble the diff. Still in the case half to get it out and chuck the axle in a lathe and take the weld off. How bad were the axles messed up a PO had to weld them on? 4 Share this post Link to post Share on other sites
