WHX?? 48,815 #3151 Posted October 5, 2019 Nice D mac, proud to call you a fellow member and glad to see you are keeping these gems alive! 1 Share this post Link to post Share on other sites
D_Mac 8,610 #3152 Posted October 5, 2019 Thank you but Im not sure its alive yet. Getting that gear selector fork in was giving me some trouble.There is a little check ball that sits on top of a spring that clicks into the groves of the fork. Well having never done this before it took me awhile to figure out how to get the fork in with the check ball. Doing so I may have done a little damage to the spring. I thought it would be ok so I assembled it anyways.The only gears in the transmission are High, Low, and Neutral. The reverse is operated by the belts. Push the pedal half way down to go forward. Push it all the way down for reverse. Somewhere in between is the brake. Safety wasnt a big thing back in 1965 I guess. Seems these little rear engine riders keep finding me or maybe I am the only one who wants them. 9 1 Share this post Link to post Share on other sites
rjg854 11,361 #3153 Posted October 5, 2019 I think they a cool looking little rider 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #3154 Posted October 5, 2019 Finished my WHrat WHrecker... Main goals: 1. Use up spare stuff on hand; 2. Learn how these things work; 3. Have some fun... 4 4 Share this post Link to post Share on other sites
AMC RULES 37,130 #3155 Posted October 5, 2019 Still no beer! But, you had some fun & it looks good to boot! 4 Share this post Link to post Share on other sites
ebinmaine 67,455 #3156 Posted October 5, 2019 25 minutes ago, SylvanLakeWH said: Have some fun Most important part!! So uhh.... Couldn't find a bigger chain?? 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #3157 Posted October 5, 2019 11 minutes ago, AMC RULES said: Still no beer! But, you had some fun & it looks good to boot! Excellent observation of an obvious design oversight on my part...no beverage holder...! I will address that situation in an appropriate fashion soon...! Gotta see what’s in the garage that can act in that noble and vital capacity! 2 1 Share this post Link to post Share on other sites
ebinmaine 67,455 #3158 Posted October 5, 2019 8 hours ago, D_Mac said: Seems these little rear engine riders keep finding me or maybe I am the only one who wants them. Sure are others who would be happy to have them. If they keep falling in your lap, keep keepin 'em going... Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #3159 Posted October 5, 2019 1 minute ago, ebinmaine said: So uhh.... Couldn't find a bigger chain?? That was headed to the scrapper! Felt obligated to repurpose it... I think it is strong enough to handle towing duties... 2 1 2 Share this post Link to post Share on other sites
Tractorhead 9,064 #3160 Posted October 5, 2019 4 hours ago, SylvanLakeWH said: Finished my WHrat WHrecker... Main goals: 1. Use up spare stuff on hand; 2. Learn how these things work; 3. Have some fun... Are you try to pull a Tank with you WHrecker ? 😳 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #3161 Posted October 5, 2019 (edited) 5 hours ago, AMC RULES said: Still no beer! But, you had some fun & it looks good to boot! Need I say more? Edited October 5, 2019 by SylvanLakeWH 1 2 1 2 Share this post Link to post Share on other sites
AMC RULES 37,130 #3162 Posted October 5, 2019 Who says... you can't make this stuff up? 1 1 Share this post Link to post Share on other sites
adsm08 2,048 #3163 Posted October 5, 2019 I got the starter/generator unit rebuild, for the second time in as many days. This time it works though. 1 1 1 Share this post Link to post Share on other sites
ebinmaine 67,455 #3164 Posted October 5, 2019 49 minutes ago, adsm08 said: I got the starter/generator unit rebuild, for the second time in as many days. This time it works though. Any thoughts what you changed? Share this post Link to post Share on other sites
adsm08 2,048 #3165 Posted October 5, 2019 54 minutes ago, ebinmaine said: Any thoughts what you changed? I swapped the field coils across the case, and I may, or may not, have switched the field coil internal connections from the brush under the F terminal to the brush under the A terminal. They are 100% on the A terminal side's brush now, I'm just not sure of where I put them yesterday. Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #3166 Posted October 5, 2019 (edited) Cleaned up garage from the WHrecker build, changed over the worker to winter duty, and...oops, forgot the Wife’s car is supposed to fit... hhhmmm... gotta measure again...since I started the frame for my next trailer conversion (a 4 seater) and it’s going in the garage too... Edited October 5, 2019 by SylvanLakeWH 2 Share this post Link to post Share on other sites
Pullstart 62,840 #3167 Posted October 5, 2019 5 minutes ago, SylvanLakeWH said: Cleaned up garage from the WHrecker build, changed over the worker to winter duty, and...oops, forgot the Wife’s car is supposed to fit... hhhmmm... gotta measure again...since I started the frame for my next trailer conversion (a 4 seater) and it’s going in the garage too... @AMC RULES still no beer. Maybe it’s lent? 1 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #3168 Posted October 5, 2019 16 minutes ago, pullstart said: @AMC RULES still no beer. Maybe it’s lent? Hey now...look at post 3161... 1 1 Share this post Link to post Share on other sites
PeacemakerJack 10,738 #3169 Posted October 5, 2019 The day has finally come!!!! GhostRider is getting electric lift for plow duty. We will finally see how tough the Warner brand electric lift units really are. Can they handle the stress of the Punisher? The boys worked with me for a couple of hours to make the change... before... Zach removing the floor boards. @squonk check out the sweatshirts the boys are wearing! Thought of you while posting...)” Judge getting rid of the arm strong lift! not finished yet but coming together. Full write up later in the GhostRider thread for those that care to check it out. 2 5 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #3170 Posted October 5, 2019 Went looking for a barn find today...and discovered this old girl burried in my own shed. So stoked to finally have her back out and running again. 5 3 1 Share this post Link to post Share on other sites
Pullstart 62,840 #3171 Posted October 5, 2019 7 minutes ago, AMC RULES said: Went looking for a barn find today...and discovered this old girl burried in my own shed. So stoked to finally have her back out and running again. Have you ever ever bought a model just to have one, then find one you already had? 1 4 Share this post Link to post Share on other sites
AMC RULES 37,130 #3172 Posted October 5, 2019 It is possible Kevin... being that there are approximately 20 +/- round hoods hanging out around here so, yeah there could be a duplicate or two in there somewhere. 1 1 Share this post Link to post Share on other sites
PeacemakerJack 10,738 #3173 Posted October 5, 2019 You know Craig that I will always have a special spot for the 1965 hydros... something about growing up using one weekly. Thanks for sharing that little beauty with us 1 2 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #3174 Posted October 5, 2019 I totally forgot what a sweet machine this tractor is...love how this thing performs flawlessly. 1 Share this post Link to post Share on other sites
953 nut 55,198 #3175 Posted October 5, 2019 1 hour ago, pullstart said: Have you ever ever bought a model just to have one, then find one you already had? Happend to me a few times, by design! 3 Share this post Link to post Share on other sites
