Maxwell-8 4,275 #11951 Posted June 21, 2021 34 minutes ago, pullstart said: Can I not judge but offer advice? Awesome build! Those welders are many times better than new stuff once you get the hang of it. I’d suggest another full pass on every exposed seam and if it’s a stick welder drag the rod along your joint instead of pushing. Make small circles or back and forth motion to c9 plate the bead. Think 2 steps forward, one step back, repeat. They look great and this is a perfect learner’s project! Keep everything clean when you weld too, that makes all the difference in the final outcome. The old saying practice makes perfect! Thanks for the tips, It is already going better then last time. 2 1 Share this post Link to post Share on other sites
Pullstart 62,841 #11952 Posted June 21, 2021 Just need to tighten the ramps and throw a handful of straps on this load, then hook up to the camper! 8 Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #11953 Posted June 21, 2021 @pullstart glad the WHrat WHrecker is making the trip!!! Please keep her away from them Wisconsin boys… She don’t need any cheese curds on her shiny tins… 7 Share this post Link to post Share on other sites
WHX?? 48,815 #11954 Posted June 21, 2021 Hey I heard that! 2 Share this post Link to post Share on other sites
Daron1965 644 #11955 Posted June 21, 2021 38 minutes ago, pullstart said: Just need to tighten the ramps and throw a handful of straps on this load, then hook up to the camper! Beautiful place you have. 2 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #11956 Posted June 21, 2021 Well now that FlowahPowah has a wide rear she is 100% done! Now onto another project I think I'll be picking up tomorrow night... 10 Share this post Link to post Share on other sites
ebinmaine 67,455 #11957 Posted June 21, 2021 43 minutes ago, OldWorkHorse said: FlowahPowah Got some nice clean whole uncracked hubs on there? Share this post Link to post Share on other sites
Pullstart 62,841 #11958 Posted June 21, 2021 1 hour ago, Daron1965 said: Beautiful place you have. thanks! We sure enjoy it out here! 3 1 Share this post Link to post Share on other sites
Pullstart 62,841 #11959 Posted June 21, 2021 Strapped down every way but Sunday! 4 4 Share this post Link to post Share on other sites
ebinmaine 67,455 #11960 Posted June 21, 2021 14 minutes ago, pullstart said: thanks! We sure enjoy it out here! Boggles my mind how FLAT it is out there 2 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #11961 Posted June 21, 2021 1 hour ago, ebinmaine said: Got some nice clean whole uncracked hubs on there? No 🙄😞 but I will have just getting sumthing done for the show lol. Got to order all 6 or 8 here soon lol. The spacers r nice and flush onto the hubs so no pressure points like on rim so should get thought the show since wont b driving it much b4. 3 Share this post Link to post Share on other sites
Oldskool 6,644 #11962 Posted June 21, 2021 How bout "What has your Wheel Horse done to you today"?? Does that fit this thread?😄😄 Or is that a differant thread altogether? Ole Hiram got a bit out of hand this evening 6 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #11963 Posted June 21, 2021 1 minute ago, Oldskool said: Ole Hiram got a bit out of hand this evening Don't leave us on that cliff hanger! Details lol. 1 1 Share this post Link to post Share on other sites
ebinmaine 67,455 #11964 Posted June 21, 2021 5 minutes ago, Oldskool said: How bout "What has your Wheel Horse done to you today"?? Does that fit this thread?😄😄 Or is that a differant thread altogether? Ole Hiram got a bit out of hand this evening Well spit it out boy! 3 Share this post Link to post Share on other sites
D_Mac 8,610 #11965 Posted June 22, 2021 So I wish I was packing up the truck to head out to the Big Show, but I am not. Instead I decided to paint the seat on the 1075. The seat I had painted cream to match the wheels. Now that I put on the new decals and the baby moons I thought the cream colored seat wasn't right. I painted it to match the decals. Chrome and black with a touch of red. Was raining out so I will post better pics later. 9 1 Share this post Link to post Share on other sites
TJ5208 1,824 #11966 Posted June 22, 2021 (edited) looking for a name for Rebel just want to find a new name thanks Edited June 22, 2021 by TJ salyers Share this post Link to post Share on other sites
Bailey855 166 #11967 Posted June 22, 2021 2 minutes ago, D_Mac said: So I wish I was packing up the truck to head out to the Big Show, but I am not. Instead I decided to paint the seat on the 1075. The seat I had painted cream to match the wheels. Now that I put on the new decals and the baby moons I thought the cream colored seat wasn't right. I painted it to match the decals. Chrome and black with a touch of red. Was raining out so I will post better pics later. LOVE THOSE DECALS 1 1 Share this post Link to post Share on other sites
Oldskool 6,644 #11968 Posted June 22, 2021 Well here we go. It was something like this. I had some bricks in the back of the truck for the new house entry. They had to be taken to the side yard for staging. I went to get a lawn tractor and cart to move them. It had a flat. So Bradley was up next. His cart had a flat. So now Hiram was the next in line. I hopped on, and fired him up to get his cart. Well this is where things went terribly wrong. I left the throttle up a bit to much. 1st gear high range. He reared up. My feet came off the stirrups. When he came down my feet hit the ground. Those big old AGs caught my pants and boots. Both feet were pulled under. All the time still moving forward, still pulling me under. I couldnt shift to neutral because I was pulled forward so far so hard my crotch my holding it in gear. My only other choice was the key switch. By this time we traveled aprrox. 15ft. When I came to a stop the only way to get my feet and legs out from under the tires and tractor was to roll the tractor back using the rear tires like a backwards wheelchair while still in gear. Needless to say the bricks are still in the truck. There was a lesson to be learned here somewhere. I do believe I will have some black and blues to remind me for a while. I hope everybody gets a chuckle for the evening from this. I did after it was all said and done. 🤦♂️ 4 1 5 Share this post Link to post Share on other sites
ebinmaine 67,455 #11969 Posted June 22, 2021 5 minutes ago, Oldskool said: hope everybody gets a chuckle for the evening from this. I did after it was all said and done That's the part that counts! Glad to hear you're ok! OW. OW. OW. OW. OW. OW. 4 Share this post Link to post Share on other sites
TonyToro 1,049 #11970 Posted June 22, 2021 13 minutes ago, Oldskool said: Well here we go. It was something like this. 😂 Well this is where things went terribly wrong. There was a lesson to be learned here somewhere. I do believe I will have some black and blues to remind me for a while. I hope everybody gets a chuckle for the evening from this. I did after it was all said and done. 🤦♂️ I didn’t want to laugh but I can totally picture this...now that you weren’t hurt to bad we can all get a laugh from it. 😂 2 1 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #11971 Posted June 22, 2021 15 minutes ago, Oldskool said: Well here we go. It was something like Well this is where things went terribly wrong. Holy Horse apples! Ya dont know whether to laugh hysterically or just stand agape in horror! Glad ur ok! (Or at least better than would be expected!) 2 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #11972 Posted June 22, 2021 @Oldskool jeez what a ride! Thinking u should install a big red button right on the top of the hood so the next time Hiram get outta line and tries to flatten it's owner just give it a little love tap and she shuts right down lol! Seriously tho glad it's only black and blues these horses arnt the lightest most nimble things out there! 1 1 Share this post Link to post Share on other sites
Oldskool 6,644 #11973 Posted June 22, 2021 12 minutes ago, ebinmaine said: That's the part that counts! Glad to hear you're ok! OW. OW. OW. OW. OW. OW. Nothing hurt but my pride 3 Share this post Link to post Share on other sites
Oldskool 6,644 #11974 Posted June 22, 2021 3 minutes ago, TonyToro said: I didn’t want to laugh but I can totally picture this...now that you weren’t hurt to bad we can all get a laugh from it. 😂 I thought it would be a good chuckle for everybody. The wife got a chuckle out of it as well. I think she choked a bit on her ice tea 4 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #11975 Posted June 22, 2021 I guess let's all be glad he didn't install that big shift knob he was talking about or might have been worse then your pride. 6 Share this post Link to post Share on other sites
