Tractorhead 9,064 #11651 Posted May 29, 2021 Think he urgently needs a flux compensator to be ready for time travelling..😎 3 Share this post Link to post Share on other sites
Tuneup 1,433 #11652 Posted May 30, 2021 Never liked the clutch pedal rattle on the restored C-125 so pulled the side cover and checked the 7451 pulley. Dry bearing and it can't be packed - I tried. eBay is my friend again. Took a look at the 48" stripped deck. I've ignored it all week. Share this post Link to post Share on other sites
KrazeyOlDave 860 #11653 Posted May 30, 2021 On 5/26/2021 at 1:43 AM, Thor27 said: This was a 90 520H I bought without the Onan, and butchered wiring. I tossed the magnum on there along with some tin. I've driven it around a bit,. I think it's going to be a keeper. There is no wiring on the tractor as yet, I've been jumping the starter lug, runs great and hydro is strong. Added a motion pedal, an electric PTO clutch today. Planning to work it through the summer and blow it apart for paint next winter. 520’s are available without the onan? If I could find one, I’d buy it and build a loader on it. 2 2 Share this post Link to post Share on other sites
KrazeyOlDave 860 #11654 Posted May 30, 2021 On 5/20/2021 at 6:47 PM, OldWorkHorse said: OK so gave up on lettering till it drys but installed new tow hitch and new seat! What exactly are we doing with this? I’m strangely aroused! 😂 1 4 Share this post Link to post Share on other sites
Thor27 767 #11655 Posted May 30, 2021 6 minutes ago, KrazeyOlDave said: 520’s are available without the onan? If I could find one, I’d buy it and build a loader on it. Hey Dave, The guy I bought it from put the onan on an argo. It was a $200 parts tractor, I've been using the deck from it for the last couple years. 2 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #11656 Posted May 30, 2021 (edited) 39 minutes ago, KrazeyOlDave said: What exactly are we doing with this? I’m strangely aroused! 😂 Haha me 2! You know idk I just loved the idea of a beefed up trail bomber and this is what my brain thought of. So I'm sure what happens with it will be alot of "how the heck did that get there or your stuck where!?" Type stuff. This is what happens when it snows and I'm stuck inside to long Edited May 30, 2021 by OldWorkHorse 1 6 Share this post Link to post Share on other sites
KrazeyOlDave 860 #11657 Posted May 30, 2021 2 minutes ago, OldWorkHorse said: Haha me 2! You know idk I just loved the idea of a beefed up trail bomber and this is what my brain thought of. So I'm sure what happens with it will be alot of "how the heck did that get there or your stuck where!?" Type stuff. This is what happens when it snows ans I'm stuck inside to long Well I’m certainly looking forward to seeing some photos of it “doing it’s thing”. 2 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #11658 Posted May 30, 2021 (edited) 8 minutes ago, KrazeyOlDave said: Well I’m certainly looking forward to seeing some photos of it “doing it’s thing”. Hopfuly soon! Just hammering out all the little things like wiring and should be up and running. Edited May 30, 2021 by OldWorkHorse 1 2 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #11659 Posted May 30, 2021 3 minutes ago, KrazeyOlDave said: Well I’m certainly looking forward to seeing some photos of it “doing it’s thing”. Not sure if saw where this started but she's come a long way haha. 3 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #11660 Posted May 30, 2021 (edited) 16 hours ago, Handy Don said: When you get back from the future, be sure to post some pics of what WHs are doing in the next century, I'd like to know what to expect. Well just so happens I manged to record quantum fluctuations in some of the smoke particle quarks. Apparently they are quantum linked with some of their counterparts in the future, by comparing the current fluctuations af apparently non linked quarks, and linked quarks, I managed to simulate a view of the Dig Dug of the future! My quantum modeling is obviously off a little ..D series i guess must bethe software default..but you get the idea! (Credit for default d series computations goes to @btm1970) Edited May 30, 2021 by Wheel Horse 3D 3 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #11661 Posted May 30, 2021 Go figure..they really havent changed, just cost a lot more! Now the big question is...would that future exist if I HADNT measured thise fluctuations????? Share this post Link to post Share on other sites
Handy Don 12,230 #11662 Posted May 30, 2021 3 hours ago, Wheel Horse 3D said: Go figure..they really havent changed, just cost a lot more! Now the big question is...would that future exist if I HADNT measured thise fluctuations????? Good to hear that our hobby is safe, if a bit more costly. Are you acquainted with Pascal's Wager? Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #11663 Posted May 30, 2021 (edited) 5 hours ago, Handy Don said: Good to hear that our hobby is safe, if a bit more costly. Are you acquainted with Pascal's Wager? Thats a Bit more on the philosophical side, but it IS one bet too many people try to just hedge. As applied to Wheel Horses, im glad I measured the quantum fluctuations, and will continue to work on Dug! Edited May 30, 2021 by Wheel Horse 3D Share this post Link to post Share on other sites
Handy Don 12,230 #11664 Posted May 30, 2021 15 minutes ago, Wheel Horse 3D said: Thats a Bit more on the philosophical side, but it IS one bet too many people try to just hedge. As applied to Wheel Horses, im glad I measured the quantum fluctuations, and will continue to work on Dug! Now you have me wishing I had better instrumentation--I feel so inadequate! Are there plans to equip Dug as a tartis? 1 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #11665 Posted May 30, 2021 Hey just as long as no JD/Kubota Darlick show up! 2 Share this post Link to post Share on other sites
KrazeyOlDave 860 #11666 Posted May 31, 2021 May 31st, 9:35am...I went out to the garage and loved on my tractor...don’t you judge me 😂 1 6 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,558 #11667 Posted May 31, 2021 “Made lemonade” out of a blown engine… Kohler time… 8 14 Share this post Link to post Share on other sites
bigcreek 205 #11668 Posted May 31, 2021 Damn fine job, great idea. 1 1 Share this post Link to post Share on other sites
Tuneup 1,433 #11669 Posted May 31, 2021 Installed a new sink at the boys' house yesterday and it's a Kohler so there is that. Finally got that carbonate wheel from HF and took the 48" out of the shed for paint removal. Got the top done in about 20 minutes but, man, the racket! Decided to give the neighbors a break and put it all away. What else to do today.... 1 Share this post Link to post Share on other sites
D_Mac 8,619 #11670 Posted May 31, 2021 (edited) So I took Jeffrey for a ride in his " camper " this morning. Turned a lot of heads. He loved it. Every time I turned around he was in it. Added the Wheel Horse decal to the newly painted trailer. Edited May 31, 2021 by D_Mac 2 4 7 Share this post Link to post Share on other sites
Lee1977 6,659 #11671 Posted May 31, 2021 My Wheel Horses took the day off, but I did have a Horse out to day Troy-Bilt tiller 3 Share this post Link to post Share on other sites
8ntruck 7,004 #11672 Posted June 1, 2021 Tool and dock pieces parts hauling duty today. Easy work. 1 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #11673 Posted June 1, 2021 Lets see....got some progress fine tuning the headlight lenses for the fiberglass hoods, did some mowing with Dug, now watchin some SG1, and painting on some led hood ornaments. Share this post Link to post Share on other sites
Snoopy11 5,714 #11674 Posted June 1, 2021 12 hours ago, KrazeyOlDave said: May 31st, 9:35am...I went out to the garage and loved on my tractor...don’t you judge me 😂 KrazyOlDave... you are krazy... BUT SO AM I ...SO WHO CARES! Don 1 Share this post Link to post Share on other sites
Achto 27,575 #11675 Posted June 1, 2021 Took my Raider 12 out and let him scratch some ground yesterday. Did some cultivating in a pumpkin patch. The pumpkin plants only have two leaves on them so far, so the rows are kind of hard to make out in the picture. 6 8 Share this post Link to post Share on other sites
