lynnmor 7,307 #11551 Posted May 23, 2021 29 minutes ago, SylvanLakeWH said: Had pvc in garage from another project so it’s a free test… have enough for five 4” wide by 42” long sections… I’m guessing it’s gonna wear pretty fast, but I tip the blade as far forward as it can and will run it “light”, so we’ll see… Drill at least another two rows of holes to get more uses from the bar. You are pretty much out of metal on the blade and having the plastic sticking out that far without support may cause problems. 2 Share this post Link to post Share on other sites
305 380 #11552 Posted May 23, 2021 i missed buying this for $50 as parts tractor by apparently minutes 5 Share this post Link to post Share on other sites
305 380 #11553 Posted May 23, 2021 and i missed this one a couple weeks ago for $150 1 4 Share this post Link to post Share on other sites
Oldskool 6,644 #11554 Posted May 23, 2021 (edited) I put the rear hubs on today. Finished painting the rear wheels and went for the maiden voyage. Only thing left is the bodywork and paint on the hood. Edited May 23, 2021 by Oldskool 3 15 Share this post Link to post Share on other sites
TonyToro 1,049 #11555 Posted May 23, 2021 19 minutes ago, Oldskool said: I put the rear hubs on today. Finished painting the rear wheels and went for the maiden voyage. Only thing left is the bodywork and paint on the hood. WOW looks great! I was thinking of the same look on one of our tractors. Can you tell me what you did to mount those rear rims? Size of tire and rim would be helpful too! 1 Share this post Link to post Share on other sites
ebinmaine 67,534 #11556 Posted May 24, 2021 Trina, her Mom and I spent a great 4 days getting stuff done around the acreage. Cutting splitting and moving wood. Building things. Yard work. Etc... Today I used the Cinnamon Horse C160 to move the wood splitter from one work place to another in the forest. 9 3 Share this post Link to post Share on other sites
Bailey855 166 #11557 Posted May 24, 2021 Good day for the horses, in between running hvac calls, (I was on call this weekend) I spread some fresh millings around the horse stable. Even had time to take the kids for a spin! Great weekend!! 9 8 Share this post Link to post Share on other sites
Oldskool 6,644 #11558 Posted May 24, 2021 1 hour ago, TonyToro said: WOW looks great! I was thinking of the same look on one of our tractors. Can you tell me what you did to mount those rear rims? Size of tire and rim would be helpful too! Those are 16in rims with 7.00x16 tires. Here is an abbreviated timeline of the procedure. 3 3 Share this post Link to post Share on other sites
Horse Newbie 7,070 #11559 Posted May 24, 2021 3 hours ago, The Tuul Crib said: Yes and it takes two weekends to do! I know what you mean...I'm thinking I may get one of those things that reminds me of a floor buffer...hook your pressure hose to it and a wand spins underneath it...does about an 18 inch or so wide swath...saves your back! 1 1 Share this post Link to post Share on other sites
953 nut 55,260 #11560 Posted May 24, 2021 10 hours ago, Horse Newbie said: .I'm thinking I may get one of those things that reminds me of a floor buffer...hook your pressure hose to it and a wand spins underneath it...does about an 18 inch or so wide swath... Saves your back! I've had one for a few years, back saver and does a great job. The two nozzles aimed on opposite directions make it much easier to do, not fighting the force of the pressure. 1 Share this post Link to post Share on other sites
Maxwell-8 4,276 #11561 Posted May 24, 2021 Nice to see everybody so busy working with/on their horses. Hope to get my Kohler running today. Have very limited time tho. 2 Share this post Link to post Share on other sites
chip61 658 #11562 Posted May 24, 2021 Got "George" running this weekend. He had been jumping the solenoid with a screwdriver since he got it so I replaced that. I need to get a battery some time, but otherwise ready to go! I got a new air filter thinking the old one may need to be replaced, and changed the oil. I thought the paint was in terrible shape, but he painted it with rattle can paint and I can see the original paint in places where it has peeled. I'm hoping I can use a pressure washer to get that off and maybe clean up the original paint. I think this tractor was taken care of until he got it a couple years ago-it looked really nice the first time I saw it. Now if I can only figure out what he did with the two rear wheel covers! 8 Share this post Link to post Share on other sites
Horse Newbie 7,070 #11563 Posted May 24, 2021 49 minutes ago, 953 nut said: I've had one for a few years, back saver and does a great job. The two nozzles aimed on opposite directions make it much easier to do, not fighting the force of the pressure. I think they leave less of a "mark" on the concrete also. When I use the handheld wand, with the yellow nozzle, sometimes you can see where my overlap was...I have noticed about all of the Pressure Washer Surface Washers say 3000psi...my pressure washer is 2500 psi I think... you think it will still work good ? @953 nut Share this post Link to post Share on other sites
Maxwell-8 4,276 #11564 Posted May 24, 2021 5 minutes ago, Horse Newbie said: I think they leave less of a "mark" on the concrete also. When I use the handheld wand, with the yellow nozzle, sometimes you can see where my overlap was...I have noticed about all of the Pressure Washer Surface Washers say 3000psi...my pressure washer is 2500 psi I think... you think it will still work good ? @953 nut Yess, why not, I believe that's the max pressure allowed thru it. 1 Share this post Link to post Share on other sites
johnnymag3 2,520 #11565 Posted May 24, 2021 On 5/22/2021 at 7:36 PM, ebinmaine said: brightosity. That's one wicked cool word !!!! 3 1 Share this post Link to post Share on other sites
ebinmaine 67,534 #11566 Posted May 24, 2021 48 minutes ago, johnnymag3 said: That's one wicked cool word !!!! Technical stuff. 1 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #11567 Posted May 24, 2021 On 5/22/2021 at 9:32 PM, 8ntruck said: The Horse got its exercise today hauling the trailer with the dock sections down from storage to the lakefront. Squirted another coat of stain on to the top side of the dock to even out the color of the old planks and the new replacement planks I installed last summer. My wife's cousin came up to his place yesterday. He has lakefront two doors down from ours. While out with the dog on our morning 'parimiter patrol', he was out weed whacking. While we were passing the time of day, he asked when the last time the Wheel Horse was tuned up. Turns out that the Wheel Horse was causing interference on his tv. Said it pixelated all of the channels. He is using a UHF antenna, not cable for his tv. Anybody else see this? Not sure if I put a resistor plug in last time I replaced it. Would that make a difference? Tonight, he came over and said that my Wagner electric sprayer was also messing up his tv. I'm beginning to think it is an antenna issue, not my equipment. He had better be glad I am not his neighbor... as the 'antenna' bull crap would not be his only problem... I don't think he would like Tillotson RS engines... Don 2 Share this post Link to post Share on other sites
Snoopy11 5,714 #11568 Posted May 24, 2021 By the way... I have to get the Horse out and haul water out to the fruit trees (cherry, apple, and pear)... because we aren't getting any rain here in Indiana... Don 1 Share this post Link to post Share on other sites
Stormin 9,981 #11569 Posted May 24, 2021 (edited) Put the mower deck on the C-125 today. When I swung the clutch pulley retaining hoop Into position after fitting the belt, it snagged on the end of the clutch pulley. After mowing I decided to investigate. I found the p.t.o. pulley a tad loose on the crankshaft. After taking the p.t.o. clutch off , I found the grub screw that tightens on the key was a touch loose and wouldn't tighten up. Pulley off and the reason was found. The grub screw is only half the length of the screw hole and the hole thread had striped. Also the hole was slightly off centre of the key way. The screw only gripping half the key. Had a root through my grub screw box and the only grub screw suitable was a 10mm. So I re-drilled and tapped the pulley. The 10mm grub screw is slightly longer than the hole but that is all for the better. It also tightens onto the full width of the key. I'll put it back together tomorrow night. It was starting to get chilly by 7pm. Why Wheel Horse didn't use a full length grub screw I don't know. Edited May 24, 2021 by Stormin 3 Share this post Link to post Share on other sites
squonk 41,121 #11570 Posted May 24, 2021 On 5/23/2021 at 5:53 PM, SylvanLakeWH said: Started on a bit of front blade maintenance and a bit of a test. Gloss front paint. Lubed everything. And… New concrete driveways this year for two of the three I plow… so going to try a pvc wear bar. Previous asphalt drives were crap so didn’t care… metal worked fine… now I’m gonna care… Had pvc in garage from another project so it’s a free test… have enough for five 4” wide by 42” long sections… I’m guessing it’s gonna wear pretty fast, but I tip the blade as far forward as it can and will run it “light”, so we’ll see… Will post completed job when the paint dries and I get her mounted up… Friend of mine got a 2" PIC pipe and cut a slit in it length wise. He snapped it over the existing wear bar on his Speeded plough. He did it to keep from scooping up gravel.Seems like it would work on concrete too. 3 Share this post Link to post Share on other sites
SylvanLakeWH 25,577 #11571 Posted May 24, 2021 1 minute ago, squonk said: Friend of mine got a 2" PIC pipe and cut a slit in it length wise. He snapped it over the existing wear bar on his Speeded plough. He did it to keep from scooping up gravel.Seems like it would work on concrete too. I’ve seen that… for where you want it to “float” over gravel or grass when pushing snow… I’m hoping this will still “cut” snow but not scar the driveway surface… we shall see… Share this post Link to post Share on other sites
Horse Newbie 7,070 #11572 Posted May 25, 2021 6 hours ago, Snoopy11 said: aren't getting any rain here in Indiana... Don Been about 4 weeks no rain in Monroe NC...the tree man has turned my yard into a dust bowl... I'm Share this post Link to post Share on other sites
D_Mac 8,619 #11573 Posted May 25, 2021 Spent the morning with @squonk today and we did a little " Horse Trading" He came by my house and fixed a leaky carburetor and installed a new muffler on my 1075. In return for his labor I got him some NOS 6x12 tires. @Squonk is a great guy, was really nice of him to help me out. I am really pleased with the results. Thanks again Mike. The 1075 now has a new look. Big Block, Short Frame, Tall Stack !! After you left Mike I remembered I had some high heat muffler paint left over from my 416-8 project so I went and painted the muffler. 9 5 Share this post Link to post Share on other sites
TonyToro 1,049 #11574 Posted May 25, 2021 My son decided to take on his own project. He said he wants to get it running all by himself. I’m amazed at what he has done so far by himself. He might have learned a thing or two. He was out there talking to himself saying...WheelHorse makes it Kohler shakes it! 😂 4 6 1 5 Share this post Link to post Share on other sites
tom2p 2,394 #11575 Posted May 25, 2021 On 5/23/2021 at 5:53 PM, SylvanLakeWH said: Started on a bit of front blade maintenance and a bit of a test. Gloss front paint. Lubed everything. And… New concrete driveways this year for two of the three I plow… so going to try a pvc wear bar. Previous asphalt drives were crap so didn’t care… metal worked fine… now I’m gonna care… Had pvc in garage from another project so it’s a free test… have enough for five 4” wide by 42” long sections… I’m guessing it’s gonna wear pretty fast, but I tip the blade as far forward as it can and will run it “light”, so we’ll see… Will post completed job when the paint dries and I get her mounted up… UHMW plastic (Ultra High Molecular Weight polyethylene) might work fairly well ? Snowmobile ski skins / skis are made of the stuff and wear well 2 1 Share this post Link to post Share on other sites
