ebinmaine 67,535 #11401 Posted May 17, 2021 15 minutes ago, Snoopy11 said: Somebody want to explain how these concrete circles are held into the wheels? I am lost.... Don Scroll back a few posts and you'll see where I put a video in. If it's the one I'm thinking of the guy installs pieces of threaded rod right through the back of the wheel and then pours the concrete. 1 Share this post Link to post Share on other sites
Lee1977 6,662 #11402 Posted May 17, 2021 24 minutes ago, Snoopy11 said: Somebody want to explain how these concrete circles are held into the wheels? I am lost.... Don Take a look at the dual wheel adapters in the drawings in the implements section. It wouldn't need to be that heavy as the concrete will hold it in place. 1 Share this post Link to post Share on other sites
Maxwell-8 4,276 #11403 Posted May 17, 2021 (edited) After I read that the Sears-forum is gone shut down because have financial concerns. I finally got around to buy my "support" member ship. Wich allows me to show a pic of my work today. Got some spare time and had these old WH rims with Goodyear AG's laying around. Probably not gone keep them, but I think the "test"-one turned out very well. If tomorrow there is no rain, It's the other one's turn. Edited May 17, 2021 by Maxwell-8 3 13 Share this post Link to post Share on other sites
ebinmaine 67,535 #11404 Posted May 17, 2021 14 minutes ago, Maxwell-8 said: I finally got around to buy my "support" member ship EXCELLENT 1 5 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,577 #11405 Posted May 17, 2021 Did they give you the secret handshake, decoder ring and WH hat with the horns yet? 9 Share this post Link to post Share on other sites
WHX?? 48,821 #11406 Posted May 17, 2021 7 hours ago, Bailey855 said: Hey Ed, this is a 1055. Right up my ally Bailey... 855 is bucket lister. Be careful of that PTO @c-series don is on the hunt for one! 2 2 3 Share this post Link to post Share on other sites
Bailey855 166 #11407 Posted May 17, 2021 Nice horse! 1965 is my year. I’ve decided to focus on that year alone. I just let my 84 c-195 go, killed me but it didn’t fit in the short frame crew lol. And maybe he would trade for a 4 wheel cart lol that’s about the only thing I would swap for. And cash of course. I don’t beleive the pto is worth as much as the cart?? 3 Share this post Link to post Share on other sites
ebinmaine 67,535 #11408 Posted May 17, 2021 4 minutes ago, WHX24 said: . Be careful of that PTO @c-series don is on the hunt for one! If a really well mannered fellow from Long Island shows up mumbling Wheel Horse Wheel Horse Wheel Horse over and over again.... Well I don't know nothing... 5 Share this post Link to post Share on other sites
WHX?? 48,821 #11409 Posted May 17, 2021 3 minutes ago, Bailey855 said: 1965 is my year. '67 is actually my year... Two 1055's - Restorations, Modifications, & Customizations - RedSquare Wheel Horse Forum I got sidetracked on that one! @wheelhorseman has a video of his PTO-66 in action. Using it to move grain to to a gravity box at a show. Sry .. no pics... Yes quite rare Ed ...that why Lowell has one! Now I know two guys that do! 1 Share this post Link to post Share on other sites
Bailey855 166 #11410 Posted May 17, 2021 7 minutes ago, WHX24 said: '67 is actually my year... Two 1055's - Restorations, Modifications, & Customizations - RedSquare Wheel Horse Forum I got sidetracked on that one! @wheelhorseman has a video of his PTO-66 in action. Using it to move grain to to a gravity box at a show. Sry .. no pics... Yes quite rare Ed ...that why Lowell has one! Now I know two guys that do! It was wild where I found it. I barley saw it through all the weeds. And I’ve seen the video you speak of. Mines all ready to go. Just need to find somthing to run one of these days 1 1 Share this post Link to post Share on other sites
Oldskool 6,644 #11411 Posted May 17, 2021 1 hour ago, SylvanLakeWH said: Did they give you the secret handshake, decoder ring and WH hat with the horns yet? Wait a minute!! There's a decoder ring??? Dang!! Mine must have gotten lost in the mail or something 2 4 Share this post Link to post Share on other sites
Oldskool 6,644 #11412 Posted May 17, 2021 3 hours ago, ebinmaine said: Two or three layers of thick Mil plastic is handy because it gives you a few thousands of leeway when installing or removing them. If I make some I will post a build thread. 3 Share this post Link to post Share on other sites
squonk 41,121 #11413 Posted May 17, 2021 5 hours ago, Gregor said: As it turns out, Terry doesn't need to make decals. You can still buy this filter. Kind-a cashy though @ $17 Buy a Napa 1410 or Wix51410. Better filter Share this post Link to post Share on other sites
c-series don 8,708 #11414 Posted May 17, 2021 @Bailey855 @WHX24 @ebinmaine looks like I have to find a 4 wheel cart to trade!! 1 1 1 Share this post Link to post Share on other sites
Ed Kennell 38,181 #11415 Posted May 17, 2021 3 hours ago, WHX24 said: 855 is bucket lister Edog has one. 1 1 1 Share this post Link to post Share on other sites
WHX?? 48,821 #11416 Posted May 17, 2021 1 hour ago, c-series don said: @Bailey855 @WHX24 @ebinmaine looks like I have to find a 4 wheel cart to trade!! Good luck with that one too Don... you know... sorry here for the not so pic but Mike @prondzy yer a fool for letting this one roam... go to around here now! Kodak moment. ... 1 1 1 Share this post Link to post Share on other sites
WHX?? 48,821 #11417 Posted May 17, 2021 Yah and we all know all know Ed Dog is suspected of being a scurvey one...come clean Ed ...figured that was too nice to be Skunkies... 1 3 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,309 #11418 Posted May 17, 2021 @Ed Kennell How are the weights mounted on the rims? 1 Share this post Link to post Share on other sites
Bailey855 166 #11419 Posted May 18, 2021 40 minutes ago, WHX24 said: Good luck with that one too Don... you know... sorry here for the not so pic but Mike @prondzy yer a fool for letting this one roam... go to around here now! Kodak moment. ... I’d love to have a 1045!!!! Share this post Link to post Share on other sites
Horse Newbie 7,070 #11420 Posted May 18, 2021 7 hours ago, Snoopy11 said: Somebody want to explain how these concrete circles are held into the wheels? I am lost.... Don I believe the bolts that are mounted to the wheels before the concrete is poured are cast in the concrete...then remove the weight, paint, or polish, then stick the bolts through the holes and tighten with a suitable nut. 1 Share this post Link to post Share on other sites
ebinmaine 67,535 #11421 Posted May 18, 2021 14 minutes ago, Horse Newbie said: I believe the bolts that are mounted to the wheels before the concrete is poured are cast in the concrete...then remove the weight, paint, or polish, then stick the bolts through the holes and tighten with a suitable nut. You can do that or just leave the bolts cast into the cee-ment. 1 Share this post Link to post Share on other sites
Horse Newbie 7,070 #11422 Posted May 18, 2021 (edited) 8 hours ago, ebinmaine said: Maybe refine it a little bit and put your own touches to it. I believe I would get one of those concrete form tubes from a home improvement store that was of a suitable diameter, cut to desired depth or "height", hot glue a cardboard bottom in it with suitable bolts in place, pour concrete while poking to make all air pockets rise and ensure smooth sides... so on and so on... Edited May 18, 2021 by Horse Newbie 1 Share this post Link to post Share on other sites
Horse Newbie 7,070 #11423 Posted May 18, 2021 11 minutes ago, ebinmaine said: You can do that or just leave the bolts cast into the cee-ment. Yessir...that is what I was saying... 1 Share this post Link to post Share on other sites
Ed Kennell 38,181 #11424 Posted May 18, 2021 54 minutes ago, elcamino/wheelhorse said: @Ed Kennell How are the weights mounted on the rims? Jim, I made a set like this many years ago. I used the bottom 3rd of a 5gallon bucket that just fit inside the wheel. Drilled 4-1/2" holes to match the holes in the wheels. Installed 4 studs in the wheel with a nut on each side to keep the studs in the correct position while I slid the bucket down over the studs and poured the bucket full of concrete. The studs are cast in the concrete. I wrapped some tie wire around the studs before pouring . 4 Share this post Link to post Share on other sites
Snoopy11 5,714 #11425 Posted May 18, 2021 8 hours ago, Gregor said: Did you watch the video? Nope! But I will! Don 1 Share this post Link to post Share on other sites
