ebinmaine 67,262 #11276 Posted May 14, 2021 14 minutes ago, squonk said: My offer of free labor is in! Youda man Mike 1 Share this post Link to post Share on other sites
D_Mac 8,593 #11277 Posted May 14, 2021 @Tractorhead Just a reminder as to what happened to me when I let someone drive one of my tractors. 1 1 5 Share this post Link to post Share on other sites
Wheel Horse 3D 3,788 #11278 Posted May 14, 2021 Usual easy day at work, hardest part of the day is figuring quips to pester folks on Red Square! Then i pay the piper for my usual relaxed job by receiving notification of 50 plus units to be tended to. At least it was able to keep untill monday! Got home, pull a print, start a customer print, and grab my 12amp power supply and out to the shop to do some torture testing of headlight lenses. While Im here might just go ahead and wire up the Caballo Diablo LED ornament! 5 Share this post Link to post Share on other sites
Gregor 4,845 #11279 Posted May 14, 2021 3 minutes ago, D_Mac said: @Tractorhead Just a reminder as to what happened to me when I let someone drive one of my tractors. That's scary ! Share this post Link to post Share on other sites
D_Mac 8,593 #11280 Posted May 14, 2021 2 minutes ago, Gregor said: That's scary ! Scary thing is, is that wasnt even the tractor he was driving !!! He smashed the one he was driving into that one! Before he got on it he told me he plows the city sidewalks in the winter. He came down the driveway on the Cub Cadet, and drove right into my Home made tractor and that Lambert that I had just finished restoring. Everything could have been a lot worse. The Cub just had a scratch, the home made just bounced right off, and the Lambert was smashed between the Cub and the curbing on the driveway you can see in the photo. If the curbing wasnt there he would have went right through my neighbors fence. 2 Share this post Link to post Share on other sites
Oldskool 6,640 #11281 Posted May 14, 2021 20 minutes ago, D_Mac said: @Tractorhead Just a reminder as to what happened to me when I let someone drive one of my tractors. HOLY CRAP!!!! What the heck happened with that? Share this post Link to post Share on other sites
Gregor 4,845 #11282 Posted May 14, 2021 (edited) My wife thinks I should have each of the grand kids drive a tractor in the parade. Sometimes.my wife is not a very good thinker. I hope that's just the wheel. Edited May 14, 2021 by Gregor 4 Share this post Link to post Share on other sites
D_Mac 8,593 #11283 Posted May 14, 2021 Yeah. Bent the center of the rim. Miracle there wasn't more damage. Took it to my cousin and he straightened it out for me. Learned my lesson though. 2 Share this post Link to post Share on other sites
Wheel Horse 3D 3,788 #11284 Posted May 15, 2021 1 hour ago, D_Mac said: Yeah. Bent the center of the rim. Miracle there wasn't more damage. Took it to my cousin and he straightened it out for me. Learned my lesson though. Man ... Share this post Link to post Share on other sites
Wheel Horse 3D 3,788 #11285 Posted May 15, 2021 (edited) Got the cabllo Diablo wired up! Thinkin of a seperate switch, so I can ask folks to look really close at that ornament. Nothin unusual? You sure?Then flip it on. Or just roll around in the dark as a pair of glowing eyes! Edited May 15, 2021 by Wheel Horse 3D 2 Share this post Link to post Share on other sites
Wheel Horse 3D 3,788 #11286 Posted May 15, 2021 Also forgot to put a pic of Dugs seat back! 2 Share this post Link to post Share on other sites
The Tuul Crib 7,336 #11287 Posted May 15, 2021 Took the mower deck off I decided to push a little dirt. The 414 are strong! And... She cleaned up well too! Have more to do this weekend! 3 5 Share this post Link to post Share on other sites
kpinnc 11,899 #11288 Posted May 15, 2021 1 hour ago, Wheel Horse 3D said: 2 hours ago, D_Mac said: Yeah. Bent the center of the rim. Miracle there wasn't more damage. Took it to my cousin and he straightened it out for me. Learned my lesson though. Hope the driver learned one too - unless he was family. ...Like the effort required to remove a boot from his rectum! 1 5 Share this post Link to post Share on other sites
Horse Newbie 7,051 #11289 Posted May 15, 2021 Pressure washed my 48 inch SD deck today in preparation for an overhaul...I started a thread under "implements and attachments" to share the progress, and to get advice and help...and maybe help someone else out too. 6 1 Share this post Link to post Share on other sites
cschannuth 3,816 #11290 Posted May 15, 2021 I let the grass go a few too many days so I dug out the old rusty lawn sweeper and swept up about six loads behind the 606.5. 8 3 Share this post Link to post Share on other sites
Horse Newbie 7,051 #11291 Posted May 15, 2021 (edited) So today in between projects and chores, I piddled with my plow that I bought a few months back... It was froze up from sitting in the weather and I had been soaking it in penetration oil for a few weeks. Today I thought I would try to see if I could turn the adjustment handle..I got it freed up, but I have a question... What is the purpose of the nut and washer that my blue pen is pointing too ?... I see if you turn it so that it moves to the left it will jam up against the threaded rod bushing, and turn when you turn the rod, so what purpose does it serve ?...It does not "lock" anything. This is the "lock nut" Edited May 15, 2021 by Horse Newbie Share this post Link to post Share on other sites
Tractorhead 9,064 #11292 Posted May 15, 2021 8 hours ago, D_Mac said: @Tractorhead Just a reminder as to what happened to me when I let someone drive one of my tractors. I don‘t leave them unattendend, allway‘s took an eye on them. 1 1 Share this post Link to post Share on other sites
D_Mac 8,593 #11293 Posted May 15, 2021 2 hours ago, Tractorhead said: I don‘t leave them unattendend, allway‘s took an eye on them. Oh he wasn't unattended. I stood there and watched him do it. If I didn't run over and turn the key off the Cub was going to climb right over the Lambert. He was test driving the Cub to buy it. He left without buying it. Gave me 100 for damage. 2 Share this post Link to post Share on other sites
ebinmaine 67,262 #11294 Posted May 15, 2021 27 minutes ago, D_Mac said: Gave me 100 for damage Good that you got that much at all but it wasn't enough. 1 Share this post Link to post Share on other sites
TonyToro 1,044 #11295 Posted May 15, 2021 7 hours ago, Horse Newbie said: So today in between projects and chores, I piddled with my plow that I bought a few months back... It was froze up from sitting in the weather and I had been soaking it in penetration oil for a few weeks. Today I thought I would try to see if I could turn the adjustment handle..I got it freed up, but I have a question... What is the purpose of the nut and washer that my blue pen is pointing too ?... I see if you turn it so that it moves to the left it will jam up against the threaded rod bushing, and turn when you turn the rod, so what purpose does it serve ?...It does not "lock" anything. This is the "lock nut" Can you show a full picture of the bottom plow? I’m thinking that nut is to lock down the barrel from turning and changing depth. 1 Share this post Link to post Share on other sites
The Tuul Crib 7,336 #11296 Posted May 15, 2021 7 hours ago, cschannuth said: I let the grass go a few too many days so I dug out the old rusty lawn sweeper and swept up about six loads behind the 606.5. Nice rig ! I can't stop looking at those wheels on that little ranger pick up. Those are getting hard to find! 4 Share this post Link to post Share on other sites
Shed 248 #11297 Posted May 15, 2021 22 hours ago, D_Mac said: Well I am STILL painting wheels. I took the rear wheels off the 875 to paint. Even though I still have not got an engine for it I want it to look good. I put on the spare set of AG tires and wheels I had and well...... I am starting to like how they look. Might just leave them on. I also ordered new throttle and choke cables for the 1075. Looking into getting a new carb for it as well. Seems to be only 2 choices. 15 dollar cheapy or 100 dollar one. Anyone have any thoughts on carbs for the 1075 ? The one on it now I believe to be a replacement. It also leaks from the bowl. What size tires are on that 875? I'd like to put tall skinny r1s on a 416 h for use in the garden make it more farm tractorish. Has any one done this to a 416? 1 Share this post Link to post Share on other sites
ebinmaine 67,262 #11298 Posted May 15, 2021 12 minutes ago, Shed said: What size tires are on that 875? I'd like to put tall skinny r1s on a 416 h for use in the garden make it more farm tractorish. Has any one done this to a 416? Shed the ones on D's ride are likely 6-12. You could also use 23 x 8.50-12. Lots of options. Avoid Deestone as a brand only because their tires notoriously VERY small. 1 Share this post Link to post Share on other sites
ohiofarmer 3,265 #11299 Posted May 15, 2021 (edited) I bought a Harbor Freight ATV sprayer for free with settlement money from their class action lawsuit. Lots of five star reviews, and I agree I set some 2x4 from under the footpegs and resting on the front axles and strapped the sprayert up to the front of the tractor. I fashioned an array of four sprayers two feet apart for a spray boom that will cover 8 feet per pass. With air injection nozzles from Teejet, there is no spray drift. with that little 40 pSI pump, there is no spray period, just water droplets, so perfectly safe to have it out front. I tested the pattern by spraying over concrete and she worked great. I have wanted to try a front mounted sprayer for some time now, and the low output low pressure pump is just right for the application. It sprays out pretty quick, so maybe 6 to eight ounces of full strength spray per 15 gallon tankful would hit the target rate of a pint per acre. If you decide to buy one, about the only complaint there is is the durability of the pump. still, at 80 bucks on sale or a hundred full price, I see no issue, I already have a pump from an old sprayer that would require a pressure reducer so I would still recommend as worth it even if the pump fails I think I hit it aboutt right, because the dandilion are starting to curl Edited May 15, 2021 by ohiofarmer 1 Share this post Link to post Share on other sites
Gregor 4,845 #11300 Posted May 15, 2021 23 minutes ago, Shed said: Even though I still have not got an engine for it I Looks to me like it has an engine on it. 1 Share this post Link to post Share on other sites
