haydendavid380 759 #10776 Posted April 26, 2021 Back to work after a couple of weeks off. Wife was getting tired of not being able to park inside, so I had to straighten everything up until next weekend. All the horses put to bed 8 Share this post Link to post Share on other sites
ebinmaine 67,465 #10777 Posted April 26, 2021 (edited) 22 hours ago, OldWorkHorse said: What you gonna use the pto for? Dnt think you got one on any of your horses? You're correct. We've not had any implements to drive with the engine..... But soon..... I have the Mckissick chipper to put into action. Also the generator implement I've had sitting around. At some point I'd like to try a hand at building an engine driven air compressor as well. Cinnamon's big K341 will be a great driver for any of them. I may also put a PTO on the Charger 12. Edited April 26, 2021 by ebinmaine Correct autocorrect 2 1 Share this post Link to post Share on other sites
WheelHorse520H 708 #10778 Posted April 26, 2021 2 hours ago, ebinmaine said: At some point I'd like to try a hand at building an engine driven air compressor as well. Is this so you can check and inflate the tires while you let it warm up? 1 3 Share this post Link to post Share on other sites
ebinmaine 67,465 #10779 Posted April 26, 2021 Just now, WheelHorse520H said: Is this so you can check and inflate the tires while you let it warm up? Now that you mention it maybe I could install a self-inflating system like our tractor trailers have. Actually what got me thinking about it in the first place is that I have a compressor that has a bad tank bottom. On this site there are a few threads that mention most useful implements or different implements or ones you wish you had, etc. Back in the late sixties an air compressor was available and it would come in quite handy around my acreage. 1 Share this post Link to post Share on other sites
Pullstart 62,849 #10780 Posted April 26, 2021 3 hours ago, ebinmaine said: At some point I'd like to try a hand at building an engine driven air compressor as well. Cinnamon's big K341 will be a great driver for any of them. An electric PTO would be the Mirror’s Bow Wow for that! 1 Share this post Link to post Share on other sites
Tuneup 1,433 #10781 Posted April 26, 2021 I listened to the list, getting guilty that I waited too long to change the 516's oil since the re-ringing. Those rings are now sealing nicely and it's been about 2 hours of run time. Mowed the lawn and drained it hot. Ewwwww! The PO just didn't take care of the inside of this engine so it has darkened walls that will take extra time to get clean. More frequent changes in the near future to get this better but she's running like a champ Fresh Rotella and a little ZDDP and we'll go again. 2 Share this post Link to post Share on other sites
ebinmaine 67,465 #10782 Posted April 26, 2021 7 minutes ago, pullstart said: An electric PTO would be the Mirror’s Bow Wow for that! I agree by general principle but I don't have good access to an electric PTO without spending mucho moolah on one. Nearly all of the builders and construction companies in the area have gas powered air compressors. Some of those have compressors that run 100% of the time and the kick out is a mechanical valve that just lets the air travel out of the tank instead of building pressure. Unless I tripped over a cheap electric PTO I'd be more likely to use something like that. 1 Share this post Link to post Share on other sites
19richie66 17,500 #10783 Posted April 26, 2021 2 hours ago, ebinmaine said: Back in the late sixties an air compressor was available and it would come in quite handy around my acreage. 5 Share this post Link to post Share on other sites
ebinmaine 67,465 #10784 Posted April 26, 2021 2 hours ago, WheelHorse520H said: Is this so you can check and inflate the tires while you let it warm up? Hey check out this page! 6 minutes ago, 19richie66 said: 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #10785 Posted April 26, 2021 6 minutes ago, ebinmaine said: Hey check out this page! For that price I'll take 2! 1 2 Share this post Link to post Share on other sites
Pullstart 62,849 #10786 Posted April 26, 2021 1 hour ago, ebinmaine said: Nearly all of the builders and construction companies in the area have gas powered air compressors. Some of those have compressors that run 100% of the time and the kick out is a mechanical valve that just lets the air travel out of the tank instead of building pressure. That’s where Putt Putt’s engine came from. I think when we moved, the rest of the unit and the leaky tank were scrapped 1 Share this post Link to post Share on other sites
WheelHorse520H 708 #10787 Posted April 26, 2021 32 minutes ago, OldWorkHorse said: For that price I'll take 2! I agree, that’s a steal! 1 Share this post Link to post Share on other sites
D_Mac 8,615 #10788 Posted April 26, 2021 Saw this photo and thought of @ebinmaine military tribute build. 7 Share this post Link to post Share on other sites
WheelHorse520H 708 #10789 Posted April 26, 2021 1 minute ago, D_Mac said: Saw this photo and thought of @ebinmaine military tribute build. That’s cool 1 Share this post Link to post Share on other sites
ebinmaine 67,465 #10790 Posted April 26, 2021 4 minutes ago, WheelHorse520H said: That’s cool Here's Trina's build thread: 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #10791 Posted April 26, 2021 16 minutes ago, D_Mac said: Saw this photo and thought of @ebinmaine military tribute build. I like the grenade on the side but I feel they may have missed a opportunity to make a BA shift knob. Can't see what's on it tho. 1 Share this post Link to post Share on other sites
WheelHorse520H 708 #10792 Posted April 26, 2021 3 minutes ago, OldWorkHorse said: I like the grenade on the side but I feel they may have missed a opportunity to make a BA shift knob. Can't see what's on it tho. I didn’t even notice that, but I agree that could be a shift knob or an attachment lift handle. Either way they missed their chance. Share this post Link to post Share on other sites
OldWorkHorse 3,045 #10793 Posted April 26, 2021 5 minutes ago, WheelHorse520H said: I didn’t even notice that, but I agree that could be a shift knob or an attachment lift handle. Either way they missed their chance. Still sweet looking! Share this post Link to post Share on other sites
TJ5208 1,824 #10794 Posted April 26, 2021 How much hp would a 6 speed tranny take 1 Share this post Link to post Share on other sites
Achto 27,570 #10795 Posted April 26, 2021 19 minutes ago, Tj salyers said: How much hp would a 6 speed tranny take produced 8hp models with a 6 or 8 speed. Horse power would not really be a big factor for the transmission though. Share this post Link to post Share on other sites
WheelhorseBob 1,549 #10796 Posted April 26, 2021 On 4/25/2021 at 10:30 AM, ebinmaine said: @WheelhorseBob sound familiar? What're we up to here Mike?? I've got the old car thing and the old boat thing down. I really want an old truck, either a Chevy 3100 or mid sixties C10. 10 Share this post Link to post Share on other sites
WHW 5 #10797 Posted April 26, 2021 (edited) Over the weekend I added a brinley disc to my raider 10. And I also took that seat off and put on factory one. This tractor was a recent purchase Edited April 26, 2021 by WHW Add to it 3 2 Share this post Link to post Share on other sites
Pullstart 62,849 #10798 Posted April 26, 2021 @WHW! That seat must’a come from a school lunch room! 4 Share this post Link to post Share on other sites
Pullstart 62,849 #10799 Posted April 26, 2021 Though I didn’t win at the auction, the hunt continues... 3 Share this post Link to post Share on other sites
Lane Ranger 10,968 #10800 Posted April 26, 2021 Knocked out the last of the rivets in a 42 inch knife bar section for a Wheel Horse tractor. Cleaned off more rust on the edges of the knife bar and oiled it down. Next step will be installing new blades and rivets! The Johnson Sickle Servicer tool should make installing new blades and rivets much easier than ever before! 2 5 Share this post Link to post Share on other sites
