What have you done to your Wheel Horse today?

[haydendavid380 759]

3 minutes ago, Gregor said:

I think you are on the wrong side of the tractor for the PTO pedal. What model tractor again?

That's the left side of the tractor. C-160 Auto

[Gregor 4,846]

5 minutes ago, haydendavid380 said:

That's the left side of the tractor. C-160 Auto

I'm not very familiar with the C-160, but I really don't think there is suppose to be a spring there at all. Someone more familiar with it is going to have to chime in.

[elcamino/wheelhorse 9,297]

@Jeff-C175and @Ed Kennell The 36 " SD deck the came with my Dad's  1972 Commando 800 had that support bar . WH over engineering. 

[squonk 41,100]

If there's anyone who knows about "extra support" it's Waldo! 

[elcamino/wheelhorse 9,297]

@squonk You are going to miss me when I take my dirt nap.

[Gregor 4,846]

25 minutes ago, Gregor said:

Someone more familiar with it is going to have to chime in.

 

[haydendavid380 759]

I'm having a hard time seeing the area in the manual, but I don't see a spring. I'll have to see if there is spring missing in the back

[Ed Kennell 38,170]

2 minutes ago, haydendavid380 said:

I'm having a hard time seeing the area in the manual, but I don't see a spring. I'll have to see if there is spring missing in the back

The brake pedal return spring should be in the back and connects the brake lever to a hole in the left axle housing gusset.

[squonk 41,100]

1 hour ago, elcamino/wheelhorse said:

@squonk You are going to miss me when I take my dirt nap.

Already miss you Jim! 

 

I hope you don't haunt me! 

[jamessparks 55]

@Ed Kennell got the 520 Onan surge fixed with the carb cleaning. Thank you for your advice and words of wisdom. 

[jamessparks 55]

[Ed Kennell 38,170]

2 hours ago, squonk said:

Already miss you Jim! 

              Don't be takin any dirt naps Jimmy..

[balconio 606]

Front receiver mount is complete. It came together real nice and now my vision for carrying all the yard tools for trail clearing is complete.

 

 

 

With the MoJack tool rack mounted

 

Ready for work

 

Scope of work. All that overgrowth needs to be cut out, and this is just one of many projects. Gonna be busy this summer.

 

[haydendavid380 759]

38 minutes ago, balconio said:

 

That looks like an excuse to buy another tractor.

 

"Honey, I'm going  to go pick up a rack to organize the garage like you always are saying I should do. Be back in a couple hours"

[Shynon 7,459]

Got my new to me original 401 out for a spin and a few pictures. Put a new fuel bowl on,diamond treads and fairbanks recoil. Runs like a top no smoke or unusual noise. 

[balconio 606]

6 minutes ago, haydendavid380 said:

 

That looks like an excuse to buy another tractor.

 

"Honey, I'm going  to go pick up a rack to organize the garage like you always are saying I should do. Be back in a couple hours"

LOL. To be honest it was semi-inspired by "The Big Tool Rack" which is made for a 3 point hitch. If money was no object I'd have a 25hp diesel subcompact and one of those racks, but the tractor is $18k and the rack is $1800. I get along pretty well with my pair of 312-8's 😁

[ebinmaine 67,472]

@balconio

 

VERY nicely executed. 

[pfrederi 17,739]

5 hours ago, haydendavid380 said:

I'm having a hard time seeing the area in the manual, but I don't see a spring. I'll have to see if there is spring missing in the back

 The pedal on the left of Auto tractors is pulled back by the little spring 6-14. It is a BIT***ch to install.  Daveoman has posted an external spring hook up to replace it.

 

 

 

 

[haydendavid380 759]

33 minutes ago, pfrederi said:

 The pedal on the left of Auto tractors is pulled back by the little spring 6-14. It is a BIT***ch to install.  Daveoman has posted an external spring hook up to replace it.

I assume that's that little spring that's not hooked to anything?

 

[Gregor 4,846]

The spring on my 876 connects to a bolt on one end, and the triangle shaped piece on the other end. If someone removed the bolt, there is nothing to connect it to.I added the locknut BTW.

Edited April 20, 2021 by Gregor

[haydendavid380 759]

Is that the one you said was a pain?

[Gregor 4,846]

35 minutes ago, haydendavid380 said:

Is that the one you said was a pain?

I didn't, no.

[krystolo 504]

I cleaned up the wheels that @pullstart sent.  Boy, are they pretty!  Just waiting for the new rear tires to come in so I can take the bundle to the tire shop to be mounted.  Rosie's gonna have new kicks!

 

Assessed the plow and ordered some parts to get the pivot handle working properly.

 

Took another look at that tiny stack, and it is round at the base.  Need to locate some exhaust pipe and extend that baby, so I can breathe the fresh country air while I drive my tractor in the sunshine.

[pfrederi 17,739]

14 hours ago, haydendavid380 said:

Is that the one you said was a pain?

 

I said it.  You will note that Gregors 876 has a different motion control no big tension spring on the cross shaft.  You have less room to work.  It is doable with some very long needle nose pliers plenty of cursing and swearing..good luck

[TJ5208 1,824]

Here's a plow I'm picking up down the road for free even got to look for brackets and swivel arm