ebinmaine 67,623 #8951 Posted January 30, 2021 10 minutes ago, Tuneup said: Out of time. Off tomorrow at 6 to obtain Wheel Horse #4 which will become WH project #3. 4 hour road trip. Oooooooooooooooooooooo 1 Share this post Link to post Share on other sites
Gregor 4,846 #8952 Posted January 30, 2021 While on the subject, what's the farthest you have driven, to pick up a Wheel Horse. 7 hours round trip for me. 1 Share this post Link to post Share on other sites
Pullstart 62,912 #8953 Posted January 30, 2021 1 minute ago, Gregor said: While on the subject, what's the farthest you have driven, to pick up a Wheel Horse. 7 hours round trip for me. With or without the big show? That’s 650 miles each way, five or take. 2018 and 2019 I brought home at least 3 more than I came with. Otherwise, probably Uncle Jim’s in WI... but went for other reasons. 2 Share this post Link to post Share on other sites
Gregor 4,846 #8954 Posted January 30, 2021 Someone tell me again, when and where is the "big show". All I know for sure is a fairgrounds some place, the Friday after Fathers Day. I need to Mapquest it. Thanks Greg 1 Share this post Link to post Share on other sites
ebinmaine 67,623 #8955 Posted January 30, 2021 25 minutes ago, Gregor said: what's the farthest you have driven, to pick up a Wheel Horse For us it would be about 175 miles one way to pick up a gift for Trina from @Herder. That was the 856 that'll be the military tribute tractor soon. 2 Share this post Link to post Share on other sites
Handy Don 12,237 #8956 Posted January 30, 2021 365 miles & six hours each way. For a roller. 2 Share this post Link to post Share on other sites
ebinmaine 67,623 #8957 Posted January 30, 2021 9 hours ago, Gregor said: Someone tell me again, when and where is the "big show". All I know for sure is a fairgrounds some place, the Friday after Fathers Day. I need to Mapquest it. Thanks Greg Arendtsville pa. Just outside Gettysburg. 2 1 Share this post Link to post Share on other sites
Herder 2,354 #8958 Posted January 30, 2021 10 hours ago, ebinmaine said: For us it would be about 175 miles one way to pick up a gift for Trina from @Herder. That was the 856 that'll be the military tribute tractor soon. 1 1 Share this post Link to post Share on other sites
Lee1977 6,666 #8959 Posted January 30, 2021 11 hours ago, ebinmaine said: For us it would be about 175 miles one way to pick up a gift for Trina from @Herder. That was the 856 that'll be the military tribute tractor soon. Soon means " a very short time" I sure you didn't mean that. Let's put it this way " Eric would just as soon Trina did that tractor". 1 Share this post Link to post Share on other sites
ebinmaine 67,623 #8960 Posted January 30, 2021 22 minutes ago, Lee1977 said: " Eric would just as soon Trina did that tractor". Oh no no. Trina is GOING to do that tractor. She's already said so. All I'll do is open/rebuild/close transmission. Maybe a little assembly. No wiring. No cables. 1 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #8961 Posted January 30, 2021 Less electric less problems i guess. 2 Share this post Link to post Share on other sites
Flat Thunder Channel 178 #8962 Posted January 30, 2021 Round two of the tire challenge is coming up shortly. I have my slightly disfigured triangle of a replacement tire and the HF mini tire changer arrived. Hoping this round goes smoother. If not.... It's tube time. Anyone have a standard tube size / part number available? I couldn't find one in my search with the correct valve stem. 3 Share this post Link to post Share on other sites
Pullstart 62,912 #8963 Posted January 30, 2021 12 hours ago, Gregor said: Someone tell me again, when and where is the "big show". All I know for sure is a fairgrounds some place, the Friday after Fathers Day. I need to Mapquest it. Thanks Greg South Mountain Fairgrounds, it’s one to put on your Can’t Miss It! List! 2 Share this post Link to post Share on other sites
Handy Don 12,237 #8964 Posted January 30, 2021 4 minutes ago, Flat Thunder Channel said: Round two of the tire challenge is coming up shortly. I have my slightly disfigured triangle of a replacement tire and the HF mini tire changer arrived. Hoping this round goes smoother. If not.... It's tube time. Anyone have a standard tube size / part number available? I couldn't find one in my search with the correct valve stem. I had the same reaction when I got a new tire and it was scrunched into a box. Apparently ok as the shop was able to mount it in two shakes of a lambs tail. Good luck! 3 Share this post Link to post Share on other sites
ebinmaine 67,623 #8965 Posted January 30, 2021 26 minutes ago, Tractorhead said: Less electric less problems i guess. Yessir. I'm going to leave the engine as is. ... With the possible exception that I might run the shut-off switch up to the dash instead of leaving it on the engine. Rope or drill start. Single setting RPM. 1 Share this post Link to post Share on other sites
haydendavid380 759 #8966 Posted January 30, 2021 On 1/23/2021 at 3:22 PM, kevincva1 said: '78 C101 Installed a headlight switch, glued a new brake lining onto the metal band, Installed a new start switch and repaired a bunch of wiring issues. Installed the headlight bucket we bought from Richmondred.and installed the new light sockets bought from Napa. Still working on acquiring parts. What glue did you use for the brake band? 2 Share this post Link to post Share on other sites
Tuneup 1,433 #8967 Posted January 30, 2021 Very nice! I used Shoo Goo on the 120 and the 125. It's been a year. No issues. The brakes are too sensitive. Makes one want to squirt just a little oil on them - almost. 2 1 Share this post Link to post Share on other sites
Tuneup 1,433 #8968 Posted January 30, 2021 Big thanks to Triple Jack in Sharpsburg and a 225 mile roundtrip right through Atlanta town, I was able to secure a very nice 520H so I have both the 48" deck AND the 1100 trans I've always wanted. The hydraulic lift is just a nice add - the front ags are sweet and will go onto the 125 ASAP. I'll strip it in the summer for a full restore. The 20 has to come apart for cylinder inspection but Jack says it will run. Everything appears to be there and I didn't even have to leave Georgia to get it! P216 gets its other head done today so might have it running next weekend. I actually have a couple pics! The old Ranger made it home with plenty of downshifting into the mountains. The old girl worked hard and burned about 3/4 of a tank. 5 3 Share this post Link to post Share on other sites
ebinmaine 67,623 #8969 Posted January 30, 2021 1 hour ago, haydendavid380 said: What glue did you use for the brake band? I've used clear silicone multiple times. No issues. Biggest thing is proper prep. Make sure it's all clean. 1 Share this post Link to post Share on other sites
kevincva1 24 #8970 Posted January 30, 2021 2 hours ago, haydendavid380 said: What glue did you use for the brake band? I used some Loctite black RTV adhesive 1 Share this post Link to post Share on other sites
haydendavid380 759 #8971 Posted January 30, 2021 21 minutes ago, ebinmaine said: I've used clear silicone multiple times. No issues. Biggest thing is proper prep. Make sure it's all clean. Wire wheeled the band and cleaned with brake cleaner then stuck together with E6000+. I'd assume that should be fine? 3 Share this post Link to post Share on other sites
ebinmaine 67,623 #8972 Posted January 30, 2021 20 minutes ago, haydendavid380 said: Wire wheeled the band and cleaned with brake cleaner then stuck together with E6000+. I'd assume that should be fine? I'm not familiar with E6000. Looks like an industrial adhesive. Seems usable. 1 Share this post Link to post Share on other sites
sparkie333 265 #8973 Posted January 30, 2021 On 1/28/2021 at 11:48 AM, Lane Ranger said: warmed up to 22 degrees but done by noon! I see you keep some blankets on some of your horses. Share this post Link to post Share on other sites
sparkie333 265 #8974 Posted January 30, 2021 2 hours ago, ebinmaine said: Make sure it's all clean. I agree must be clean --works the best--great to see the fix. 1 Share this post Link to post Share on other sites
squonk 41,155 #8975 Posted January 30, 2021 17 hours ago, Gregor said: Someone tell me again, when and where is the "big show". All I know for sure is a fairgrounds some place, the Friday after Fathers Day. I need to Mapquest it. Thanks Greg 615 Narrows Rd. Biglerville Pa. is the proper GPS address 1 1 1 Share this post Link to post Share on other sites
