953 nut 55,243 #7676 Posted November 17, 2020 39 minutes ago, AMC RULES said: would like some dense plactic, or nylon maybe Look in the "furniture parts" drawers at Lowe's Or Home Depot, all sorts of odd stuff in there. 1 Share this post Link to post Share on other sites
19richie66 17,508 #7677 Posted November 17, 2020 (edited) 57 minutes ago, AMC RULES said: Needing some help finding those please. All I'm finding are rubber...would like some dense plactic, or nylon maybe. Clear heat shrink would do it. The thick kind with the glue in it. Like this. ⬇️ https://www.cableorganizer.com/crystal-clear-hst/ Edited November 17, 2020 by 19richie66 1 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #7678 Posted November 17, 2020 Humm, interesting. Ty Rich. 1 Share this post Link to post Share on other sites
WHX?? 48,815 #7679 Posted November 17, 2020 (edited) Yah I like it Ritchie ..... Might help to help to keep cable lube in too? Why no rubber ones tho Madge ....You don't like wearing a raincoat? Edited November 17, 2020 by WHX24 Share this post Link to post Share on other sites
19richie66 17,508 #7680 Posted November 17, 2020 (edited) 5 minutes ago, WHX24 said: Yah I like it Ritchie ..... Might help to help to keep cable lube in too? It would keep it from rusting I believe. It does get hard when heated and dried but still would keep it from chipping the paint going through the hole. And it wouldn’t be obvious if done right. If you lubed it good before installing it, maybe. Edited November 17, 2020 by 19richie66 1 Share this post Link to post Share on other sites
WHX?? 48,815 #7681 Posted November 17, 2020 2 hours ago, DennisThornton said: That is so very bad in so many ways that I LIKE it! Looks like you are catching up here Dennis.....good man ....just a ton of good stuff in this thread and a few belly laughs as well ... enjoy! 2 Share this post Link to post Share on other sites
WHX?? 48,815 #7682 Posted November 17, 2020 20 minutes ago, 19richie66 said: It would keep it from rusting I believe. It does get hard when heated and dried Agreed but lets keep that language away from Madge tho..... 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #7683 Posted November 17, 2020 Thinking it's probably already too late. 1 Share this post Link to post Share on other sites
echris 1,425 #7684 Posted November 17, 2020 (edited) I put the new 42RD on the 310 to mulch some leaves. Forgot I had greased the ever livin' hell out of the spindles. Engaged the PTO and watched the grease fly everywhere. Welp, at least she ain't gonna rust. Edited November 17, 2020 by echris 5 Share this post Link to post Share on other sites
DennisThornton 4,769 #7685 Posted November 17, 2020 2 hours ago, WHX24 said: Looks like you are catching up here Dennis.....good man ....just a ton of good stuff in this thread and a few belly laughs as well ... enjoy! My friend, you are absolutely correct! I suspected that I was missing a lot and I was! There is SO much knowledge here in one concentrated space!! And a huge plus, from really good folks! It's good to be back! I'm humbled to be noticed... 4 3 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #7686 Posted November 17, 2020 6 hours ago, Jhook said: New pins on the right side loader arm today. No grease on anything as it will all need to be painted anyways, i just dont want to keep messing with the loader with worn out pins. Looked at the trans for a few. Dont know anything about them, dont see any obvious issues. Need to lift the machine up soon and wash the trans so i can start to find the problem(leak) if im lucky its a loose filter but i doubt it. Yes, loader seems to be degreased to be faster prepared to give it a fresh paint. i hear in my mind the - i got the Power- soundtrack out of the 80-ies for motivation and see you in my imagination rework that FEL. it‘s worth the Work. 👍 2 1 Share this post Link to post Share on other sites
19richie66 17,508 #7687 Posted November 17, 2020 10 hours ago, WHX24 said: Agreed but lets keep that language away from Madge tho..... always in the gutter ........ 3 Share this post Link to post Share on other sites
DennisThornton 4,769 #7688 Posted November 17, 2020 On 10/15/2019 at 8:06 AM, pullstart said: You can always look for another one for full treatment... There happens to be a Big Show not too far from you in June every year, at the South Mountain Fairgrounds in Biglerville / Arendtsville. It’s Wheel Horse only and there have been known to have been some good deals! I went with one tractor in my 5’ box Colorado thinking I was full and wouldn’t bring anything home... this is my truck heading back to MI after my first show You know, I would have been impressed if you had only tried a little bit harder! Some more thought and effort would have shown what could have really been hauled and would have encouraged so many more members!. Well. I'll be watching for the next haul! 1 9 Share this post Link to post Share on other sites
DennisThornton 4,769 #7689 Posted November 17, 2020 On 11/3/2019 at 6:01 AM, SylvanLakeWH said: Added dually’s to the WHrat WHrecker... Used 12” pvc pipe with a 2” spacer width...12” carriage bolts. Tires are 23x8.5x12. Well I'll be! 1 2 Share this post Link to post Share on other sites
ebinmaine 67,508 #7690 Posted November 17, 2020 19 minutes ago, DennisThornton said: Well I'll be! You'll be what??? 1 1 Share this post Link to post Share on other sites
DennisThornton 4,769 #7691 Posted November 17, 2020 2 minutes ago, ebinmaine said: You'll be what??? Amazed at the creative ideas on this forum! 2 2 1 Share this post Link to post Share on other sites
ebinmaine 67,508 #7692 Posted November 17, 2020 22 minutes ago, DennisThornton said: Amazed at the creative ideas on this forum! It's actually kind of nice to see the old posts as you go through and pluck them out 2 1 Share this post Link to post Share on other sites
DennisThornton 4,769 #7693 Posted November 17, 2020 On 12/6/2019 at 5:42 PM, 19richie66 said: Well that ain’t gonna work Ouch! Some Bengay? But what was it? And motor? 1 Share this post Link to post Share on other sites
DennisThornton 4,769 #7694 Posted November 17, 2020 25 minutes ago, ebinmaine said: It's actually kind of nice to see the old posts as you go through and pluck them out Pretty nice for me too! It's great that you don't mind some reruns. 4 Share this post Link to post Share on other sites
DennisThornton 4,769 #7695 Posted November 17, 2020 On 12/13/2019 at 8:03 PM, pullstart said: I replaced the S/G belt, cleaned the carb, changed fluids and what better time to take a ride in the moonlight! Neat mug! Etched? Or perhaps blasted? Aren't these lyrics to a country song? "I replaced the S/G belt, cleaned the carb, changed fluids and what better time to take a ride in the moonlight!" 2 1 Share this post Link to post Share on other sites
Pullstart 62,890 #7696 Posted November 17, 2020 6 minutes ago, DennisThornton said: Neat mug! Etched? Or perhaps blasted? Aren't these lyrics to a country song? "I replaced the S/G belt, cleaned the carb, changed fluids and what better time to take a ride in the moonlight!" That’s a Mary Jane Special. You can contact @HorseFixer for more detail. Duke isn’t on here much, but you can PM me and I’d send you his email. 1 Share this post Link to post Share on other sites
DennisThornton 4,769 #7697 Posted November 17, 2020 On 12/18/2019 at 10:14 AM, ohiofarmer said: I fixed wheels to my lift so as to be able to lift and move the tractors. Sitting in a folding chair and being able to rest rear tires on my lap to mount is really worth it. These little lifts slide under tables and take up very little floor space. Tractors shown are an electro 12 and a 1075 Ain't that somethin! Son of a gun! I want one! No! I want two! Wonder if my engine hoist could be modified? Man that is neat! Share this post Link to post Share on other sites
DennisThornton 4,769 #7698 Posted November 17, 2020 2 minutes ago, pullstart said: That’s a Mary Jane Special. You can contact @HorseFixer for more detail. Duke isn’t on here much, but you can PM me and I’d send you his email. The lyrics or the mug? I admire the mug for sure but just wanted to know if you did it and how. I used to put a couple layers of masking tape on glass, draw a pattern, cut out what I wanted etched and blast away. Thought maybe you did that too. 1 Share this post Link to post Share on other sites
Pullstart 62,890 #7699 Posted November 17, 2020 5 minutes ago, DennisThornton said: The lyrics or the mug? I admire the mug for sure but just wanted to know if you did it and how. I used to put a couple layers of masking tape on glass, draw a pattern, cut out what I wanted etched and blast away. Thought maybe you did that too. Duke’s wife MJ makes them, but yes I believe they are etched. 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,562 #7700 Posted November 17, 2020 1 hour ago, DennisThornton said: Well I'll be! @pullstart has the WHrat WHrecker now... I’ve been waiting for him to put the duallys back on and show off her large behind... but apparently he’s doodling away his time freezing in a blind trying to kill poor defenseless little bambis... 1 1 Share this post Link to post Share on other sites
