Tractorhead 9,064 #6001 Posted August 7, 2020 (edited) Hoooooooney, i go Shopping .... - for the Hooooorrseee .😇😎 Ok, there existing sentences you better keep to yourself.. 😂 Jump shortly to a Hardwarestore, to find some needed Things. Firstly to fix loosened drain oil Screw i organized few Fittings 3/8“ identical ones, as i used on my 212. ok a Galvanized will maybe work also, but i must have a bit of Crome somewhere on my Machines. like a good old statement „ you only can Trust it with Chrome and Flames“, i like it... some fresh Oil for a First refilling here of the Whole Horse I don‘t know something about rotella as some here mentioned, here at my side i prefer Liqui Moly Oils with best experiences over decades. 5W30 for the tecky shall be fine, i hope he like it and 2 Bottles with 85W 90 gearoil for the Unidrive. If i be correct the Unidrive must have 1quart in that‘s close 1Litre. 0,9 Litre to be exact. i think it would die with one Liter in the Tranny 2 Bottles of Brake cleaner to remove some old Grease and oil spills. than while im lurking arround what they have arround Colors a red blitzen into my Eye i do immediately a stop and found that Beautiful Rubin Red and i decided to choose the Color combination, i will use for her new Finish. Rubin Red ( RAL3003). Deepblack (RAL9005) and a bright grey close to whilte( no RAL) i searching arround the Whole Colorpallette they have and love that Combination i put firstly on the Side. In my Mind i can see the Result, and i think it looks beautiful. Edited August 7, 2020 by Tractorhead Corrected red is ral3003 5 3 Share this post Link to post Share on other sites
johnnymag3 2,520 #6002 Posted August 7, 2020 (edited) Looking for a close up detail of the B100 govenor, and throttle at the piviot point on the cooling cover, its under the carb. I know this one is not right, and I want to make mine original as possible, I can tell from my pics, and tear down today, its not how WH would do it. Also the cable routing for the throttle Thanks, john Edited August 8, 2020 by johnnymag3 Share this post Link to post Share on other sites
johnnymag3 2,520 #6003 Posted August 8, 2020 B100 tear down yesterday....found lots of good things !!!! 2 2 Share this post Link to post Share on other sites
johnnymag3 2,520 #6004 Posted August 8, 2020 No wires chewed....Incredible .... Gonna need a new Battery too I think...... 2 4 Share this post Link to post Share on other sites
ebinmaine 67,657 #6005 Posted August 8, 2020 3 minutes ago, johnnymag3 said: B100 Several easy fixes and you're on your way.. 2 1 Share this post Link to post Share on other sites
19richie66 17,508 #6006 Posted August 8, 2020 Very nice tractor! 4 Share this post Link to post Share on other sites
johnnymag3 2,520 #6007 Posted August 8, 2020 Gas line was so brittle it shattered upon removal....everything else is awesome....but glad I tore it down, the cooling areas were a Condo for the little critters!!! 1 Share this post Link to post Share on other sites
johnnymag3 2,520 #6008 Posted August 8, 2020 I tried to wake up the little one in the bottom of the shroud, but I think he was off to mouse heaven 15 years ago 1 1 Share this post Link to post Share on other sites
johnnymag3 2,520 #6009 Posted August 8, 2020 19richie66.............I will come up with another name other than Patina...seems to be too long, and even though this tractor will stay the way it is, no new paint..... I will come up with a name for it... Any suggestion anyone ??? Share this post Link to post Share on other sites
19richie66 17,508 #6010 Posted August 8, 2020 (edited) I already drew it up and fitted it to the plate. It’s ready to weld. 👍 Edited August 8, 2020 by 19richie66 1 Share this post Link to post Share on other sites
ebinmaine 67,657 #6011 Posted August 8, 2020 3 minutes ago, johnnymag3 said: Any suggestion anyone ??? We find that they name themselves on occasion 1 1 Share this post Link to post Share on other sites
johnnymag3 2,520 #6012 Posted August 8, 2020 (edited) 10 hours ago, ebinmaine said: We find that they name themselves on occasion I agree... But does a skeleton on a snowmobile mean anything ??? Edited August 8, 2020 by johnnymag3 1 Share this post Link to post Share on other sites
peter lena 8,637 #6013 Posted August 8, 2020 tractorhead, amazed to see someone refer to LUBRICATION AS A THING TO DO ON A TRACTOR , WHAT A CONCEPT ! also jack up the front end to properly grease the front end axle lower area , usually starved for lube, your pictures of numerous areas of lighter fluid lubricant to rusty movement areas says it all. i regularly use the LUCAS LUBRICANTS , because they really stand up . thank you for the view on that , pete 1 Share this post Link to post Share on other sites
johnnymag3 2,520 #6014 Posted August 8, 2020 Its official... Her name is PATINA thanks !!!!!!! Share this post Link to post Share on other sites
ebinmaine 67,657 #6015 Posted August 8, 2020 14 minutes ago, johnnymag3 said: I agree... But does a skeleton on a snowmobile mean anything ??? Not to me. 1 Share this post Link to post Share on other sites
johnnymag3 2,520 #6016 Posted August 8, 2020 (edited) this is the first thing I saw when I arrived Very Strange I thought.................... Edited August 8, 2020 by johnnymag3 1 1 Share this post Link to post Share on other sites
lynnmor 7,308 #6017 Posted August 8, 2020 1 hour ago, johnnymag3 said: No wires chewed....Incredible .... The tractor was built before the incredibly dumb idea to use soy based insulation. 2 1 Share this post Link to post Share on other sites
AMC RULES 37,132 #6018 Posted August 8, 2020 We begin today's 854 progress report... ...with this realization. There are no two ways about this! Things have to get worse before they can get better! 6 2 1 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #6019 Posted August 8, 2020 Started today a first Checkup begin with Gearoil after that i try to insert the Oildrainpipe, missed it is 1/4“ not 3/8“ as i thought. Dang, ok so it still be reworked to be tight and not leaky. than i rework the adjuster the Decklever, to use it again. was just gently rusted, maybe while on the long Trail to my Stable. Mounting a Airfilter case on rework the gouvenor To be again spring preloaded. Than Fillup Engine Oit aaaaand Here we go... 6992EA63-96AA-4DD9-95D3-3FD2A716B39D.MOV Yap, success. As a Ignition i use a simple pull push Switch, i have laying arroung, nice, because it‘s a Magneto. So it worked simply but reliable for a first Testride. Fillup the Fuel Than try how it performs while mowing. Deck was not resharpened yet for that. I‘m impressed. So much better that i ever imagine, even on higher Grass.( much better than the 212 with it‘s 16HP Engine) even on Slope you just can hear the Engine works harder, but it did it‘s Job perfectly. While refilling for a Trial thru Forrest, Mart‘l stops with his Huge Tractor near me jumps out and and inspect the Horse. “ Oh holy, is that the Thing we unloaded yesterday ? ya like it to Work eh, hahaha, have good new‘s for you“ i thanked him for the rapid unload that Box from the Truck. „Nice piece of Rust what is it“ i told him it‘s my 54Year Old Wheel Horse 656 directly imported from USA, I like to restore. He meant, „you‘re jokeing me, did you mow today with that Thing?“ Yap. “Whow, that impresses me really i just wonders about the different Sound i hear Today“ i just can answer. Than told me he wanna enforce the Clearance of the Shed, if i really like, i be first he will ask if all his machines he don‘t need further sold. I can take a look if i like something except his Tractor and the huge Trailer. I get an option on 70 Sqaremeters with a Massive Concrete floor, that can at least 40Tons. So a Lift wouldn‘t be a problem at all. than i do another Trail thru the Forrest, keep an eye for that while i ride about one hour thru Forrest, i took a lot of Picts 1 6 1 5 Share this post Link to post Share on other sites
AMC RULES 37,132 #6020 Posted August 9, 2020 Besides the completed disassembly to a bare frame, I can report at least one positive thing was accomplished here today! 8 4 Share this post Link to post Share on other sites
Jhook 849 #6021 Posted August 9, 2020 Not much done to the 315 lately. Been tied up with a frame off restoration im in the process of doing on a 1982 honda odyssey fl250 i picked up. I did order this hitch/plow mount hopefully it fits. Does anyone know what plow i need for a 2007 315-8? Share this post Link to post Share on other sites
8ntruck 7,019 #6022 Posted August 9, 2020 (edited) Gave mine some exercise mowing the lawn today. Swapping over to studs on the rear hubs is floating closer to the surface. Maybe that will happen this week. Edited August 9, 2020 by 8ntruck 1 Share this post Link to post Share on other sites
Pullstart 62,916 #6023 Posted August 9, 2020 @Tractorhead I am so glad it cuts well for you, and to see the pictures in the forest! Can you see now the feeling of the horizontal shaft engine and it’s brute abilities? Great work on getting it going again! 1 Share this post Link to post Share on other sites
DBlackston 298 #6024 Posted August 9, 2020 Painted some tires and bought a harbor freight mini tire changer and tire iron. Before and after bleche white. Before and after the first coat of American Automotive Tire Paint After the first coat. Another comparison on one of the 6-12 ags before and after paint. 5 Share this post Link to post Share on other sites
AMC RULES 37,132 #6025 Posted August 9, 2020 (edited) Early morning rise to beat the heat and make some more good progress netted me this little accomplishment today. Complete with both it's belt guard... and trans mounts repaired before 8am. Sure the neighbors weren't happy listening to the grinder that early, but I sure am! Edited August 9, 2020 by AMC RULES 2 6 Share this post Link to post Share on other sites
