JCM 9,179 #5726 Posted July 11, 2020 What I did today is pretty mindless compared to what you are dealing with @johnnymag3 . Cleaned, sanded and sanded more and degreased. Just to hot to prime and paint today. Will be up a the crack of dawn to beat the heat in the morning and get these ready for assembly on the 310-8. 7 1 2 Share this post Link to post Share on other sites
AMC RULES 37,132 #5727 Posted July 12, 2020 (edited) Installed a set of auxillary lighting, in the form of an HL-5 kit. Was nice to discover them hiding in my inventory here today. Edited July 15, 2020 by AMC RULES 10 3 1 3 Share this post Link to post Share on other sites
AMC RULES 37,132 #5728 Posted July 12, 2020 Together today, two from the collection...'63 & '64. 8 4 2 Share this post Link to post Share on other sites
rjg854 11,387 #5729 Posted July 12, 2020 What have I done to my wheel horse today? I done sold it! Buh bye 877 3 2 8 Share this post Link to post Share on other sites
JCM 9,179 #5730 Posted July 12, 2020 At 5.30 am I was painting those parts that were prepped yesterday before the heat, then mowed the lawn with the 312 and took a trail ride on both the C-120 and the 417-8. Overall a productive and fun day with plenty of seat time. 5 5 Share this post Link to post Share on other sites
19richie66 17,508 #5731 Posted July 13, 2020 I have got to get me a piece of that organizer plywood. Mine is just the regular kind that stuff just lays on and builds up into piles. 8 2 Share this post Link to post Share on other sites
Stormin 9,981 #5732 Posted July 13, 2020 C-125 has been a bit of a pig to start and I've not been able to get it to idle to my satisfaction. Points, plug etc all checked and ok. So as I'm not needed at the farm, I decided to change the fuel pump as I had a spare. Started much better and I've got it idling better. It doesn't die and stop now. Idles a bit fast for me, so I'll maybe root out my hand held tachograph and see what rev's it's doing. 4 1 Share this post Link to post Share on other sites
12Horse Paladin 1,038 #5733 Posted July 13, 2020 Yesterday's fun...Gettin things together as i can... Clara being her usual watchful (lol) helpful self... Y'all have a great day😊 6 4 1 Share this post Link to post Share on other sites
Pullstart 62,916 #5734 Posted July 13, 2020 Since my Edward mower didn’t some self destructive work, I popped a 36” deck on Leroy. It needed a modern style mid mount Tach-A-Matic, but was otherwise straight forward. Now, I can use this to keep the field mowed until the September wedding reception. 8 1 Share this post Link to post Share on other sites
Pullstart 62,916 #5735 Posted July 14, 2020 Put that 36” deck above to good use. I did a little over an hour of “mowing at dark” in the field, LED’s lighting my way and the laying down the path! Obviously too dark for pics, I’ll have to see what it looks like tomorrow! 1 1 Share this post Link to post Share on other sites
12Horse Paladin 1,038 #5736 Posted July 14, 2020 Got her back on her feet, yesterday😁😁 ...just to have the fuel pump start draining it🙄 Expect threads/questions, as i try to figure out if i can fix it m'self, lol 5 4 Share this post Link to post Share on other sites
Pullstart 62,916 #5737 Posted July 14, 2020 8 hours ago, pullstart said: Put that 36” deck above to good use. I did a little over an hour of “mowing at dark” in the field, LED’s lighting my way and the laying down the path! Obviously too dark for pics, I’ll have to see what it looks like tomorrow! this is obviously not front lawn quality, but Leroy was mowing grasses and small trees that were well over his stack last night! 6 4 Share this post Link to post Share on other sites
johnnymag3 2,520 #5738 Posted July 14, 2020 BAD BAD LEROY BROWN BADDEST TRACTOR IN THE WHOLE DANG TOWN !!!!!!!!!! 2 3 Share this post Link to post Share on other sites
chip61 658 #5739 Posted July 14, 2020 I felt bad Sunday for what I was cutting with my 416, but it wasn't quite that tall!! 1 Share this post Link to post Share on other sites
Pullstart 62,916 #5740 Posted July 14, 2020 1 hour ago, johnnymag3 said: BAD BAD LEROY BROWN BADDEST TRACTOR IN THE WHOLE DANG TOWN !!!!!!!!!! Same tractor, different reference, both work! Leroy is a Horse or a Different Color. That’s Big and Rich’s first album title. “Riding up and down Broadway on my old stud Leroy, singin’ Save a Horse, Ride a Cowboy!” 1 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,602 #5741 Posted July 14, 2020 (edited) So the LED tail lights on our new to us T@B teardrop camper were partially "burned out", but one of them had all but three diodes working. So, after I replaced the tail lights, I started thinking... The utility light that I mounted on the back of the C 105 worked perfectly for night-time reverse plow duty, but it burned out last season... So, I cut out the old light from the rubber housing with the dremmel tool, bolted the former T@B taillight inside the rubber mounting, wired it up on the stop light wire and Voila - I have an even brighter rear utility light, albeit red... which actually is better! Free and better - I love it! Edited July 14, 2020 by SylvanLakeWH 3 1 1 Share this post Link to post Share on other sites
squonk 41,158 #5742 Posted July 14, 2020 2 day project on the Wheel a Matic. Yesterday started with this: stripped down: Metal etch: Today prime and paint: 4 8 4 Share this post Link to post Share on other sites
ebinmaine 67,657 #5743 Posted July 14, 2020 Squonk ya done all right there man 4 Share this post Link to post Share on other sites
johnnymag3 2,520 #5744 Posted July 14, 2020 Good idea to get it to metal....nothing better. DONT Compromise...You wont be happy if you do 4 Share this post Link to post Share on other sites
ebinmaine 67,657 #5745 Posted July 14, 2020 Just now, johnnymag3 said: DONT Compromise I had a guy tell me quite a while back that painting something is actually about 95%, NOT painting. I've learned this past year that welding is the same way. 3 1 Share this post Link to post Share on other sites
johnnymag3 2,520 #5746 Posted July 14, 2020 I need to learn this talent of welding....PREP PREP PREP Dang chicken poop welds.....I never seem to get it right !!! SEND IT OUT>>>>>>>Safer 2 Share this post Link to post Share on other sites
Ro-Go 76 #5747 Posted July 15, 2020 (edited) Added RV antifreeze as ballast to the new tires, front and rear. Got a transfer pump for $60 online, so tiny and cheap. Ugh. It worked, but the tires and tubes wanted to push the ballast back out; I did shut pump down 1/2 way to release air...but it still kept wanting to push out of the valve -- was there something I did wrong? Edited July 15, 2020 by Ro-Go 1 1 Share this post Link to post Share on other sites
ebinmaine 67,657 #5748 Posted July 15, 2020 6 hours ago, Ro-Go said: Added RV antifreeze as ballast to the new tires, front and rear. Got a transfer pump for $60 online, so tiny and cheap. Ugh. It worked, but the tires and tubes wanted to push the ballast back out; I did shut pump down 1/2 way to release air...but it still kept wanting to push out of the valve -- was there something I did wrong? @pullstart could explain how he set one up... Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #5749 Posted July 15, 2020 8 hours ago, Ro-Go said: It worked, but the tires and tubes wanted to push the ballast back out; I did shut pump down 1/2 way to release air...but it still kept wanting to push out of the valve -- was there something I did wrong? You really need that valve adapter they sell at tractor supply... https://www.tractorsupply.com/tsc/product/slime-air-water-adapter-kit-with-bleeder-valve ... It bleeds the air out while fluid filling. 1 Share this post Link to post Share on other sites
953 nut 55,324 #5750 Posted July 15, 2020 9 hours ago, Ro-Go said: tires and tubes wanted to push the ballast back out; I did shut pump down 1/2 way to release air...but it still kept wanting to push out of the valve -- was there something I did wrong? As you add fluid the air in the tube is pressurized and eventualy you reach a point where the pump can't overcome the pressure and you just need to shut it down and let it burp. 1 Share this post Link to post Share on other sites
