Pullstart 62,787 #5526 Posted June 28, 2020 Took an evening cruise with Stormy and a frosty beverage... 9 Share this post Link to post Share on other sites
johnnymag3 2,515 #5527 Posted June 28, 2020 I finished stripping the ANGRY Tractor, that 10 HP Kohler is being very stubborn. Found a Hard brittle coil wire, so adding that the the list of parts to replace. Ordered a new one today, hope it comes sooner than later. Maybe pop the one off of the 12 HP Kohler to test.... Hoping to finally figure out SNAP, CRACKLE ,POP 3 Share this post Link to post Share on other sites
D_Mac 8,593 #5528 Posted June 28, 2020 Changed my mind on something. Decided to go in a different direction with the hood. New orded has been placed.... Stay tuned !!! 4 1 2 Share this post Link to post Share on other sites
echris 1,425 #5529 Posted June 28, 2020 (edited) 1 hour ago, johnnymag3 said: I finished stripping the ANGRY Tractor, that 10 HP Kohler is being very stubborn. Found a Hard brittle coil wire, so adding that the the list of parts to replace. Ordered a new one today, hope it comes sooner than later. Maybe pop the one off of the 12 HP Kohler to test.... Hoping to finally figure out SNAP, CRACKLE ,POP Two things: 1). Wait till dark and mist some water over the coil wire while's she's running. Oooh Sparkly! 2). Swing by sometime and we'll take a look at that 12HP K in the Cub. 2a). I'll get it running first, then we'll do a look see, compression test, whatever. Edited June 28, 2020 by echris 2 1 Share this post Link to post Share on other sites
Jhook 849 #5530 Posted June 28, 2020 Mowed my entire yard for the first time with me new (to me) 315-8. This is a very very steep hill. Pics dont show it at all. But the machine did great. Grass was soaking wet from all the rain yesterday and i hardly broke traction once. 7 5 Share this post Link to post Share on other sites
19richie66 17,500 #5531 Posted June 28, 2020 Nice machine and a cup holder! 1 1 Share this post Link to post Share on other sites
Jhook 849 #5532 Posted June 28, 2020 12 minutes ago, 19richie66 said: Nice machine and a cup holder! Thanks! I just got it a few days ago never owned one of these before. Its a 2007 and only just turned 130 hours. Im loving it so far! 4 3 Share this post Link to post Share on other sites
D_Mac 8,593 #5533 Posted June 28, 2020 Looks very well taken care of. KEEP IT THAT WAY !!! Congrats on your new machine and welcome to the club !!! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,032 #5534 Posted June 28, 2020 For those that could use a new fuel cap lens Garry 2 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #5535 Posted June 28, 2020 12 hours ago, echris said: Two things: 1). Wait till dark and mist some water over the coil wire while's she's running. Oooh Sparkly! 2). Swing by sometime and we'll take a look at that 12HP K in the Cub. 2a). I'll get it running first, then we'll do a look see, compression test, whatever. Windex is also a 😎 way to ✔ for leaking sparkle 😌. 2 Share this post Link to post Share on other sites
johnnymag3 2,515 #5536 Posted June 28, 2020 (edited) This wire is breaking down inside the rock hard insulation. Did some cleaning, pulled valves, reinstalled. Making a new wire to the coil as this one is suspect Edited June 28, 2020 by johnnymag3 pictures add Share this post Link to post Share on other sites
rjg854 11,349 #5537 Posted June 28, 2020 On 6/26/2020 at 8:04 PM, rjg854 said: Trying to figure out why the 1076 won't start I thought the ignition switch was the problem because there was no return from the start position. Went through the wiring all the wires are in good shape, cleaned all connections and grounds and the battery has a full charge. I'm kinda stumped at this point but tomorrow is another day. Gonna study the manual tonight. And now for the rest of the story Come to find out, I took the battery had it load tested, only 5 cold cranking amps. Altho it read 12.53 volts. New battery and it fired right up So I'm back in business. Rebuild the carb and that should fix the idling problem. After that I should have all glitches sorted out. 8 2 1 Share this post Link to post Share on other sites
ebinmaine 67,271 #5538 Posted June 28, 2020 Trina, her mom, Meeha mirror, and I spent some quality time in the woods today. I pulled 4 loads out to the shed and they did a fair amount of splitting. Could've done a bit more but thunderstorms were rolling in... Trina snapped a pic of this neat mushroom. I wish video was better at showing inclination angle. This is a fairly steep climb for a few feet. Note zero work on the part of the big 16. 6 2 1 Share this post Link to post Share on other sites
rjg854 11,349 #5539 Posted June 28, 2020 Got the horses out for a little fresh air and sunshine. Of course they wouldn't social distance, you know how horses can be. They sure look happy 2 11 3 Share this post Link to post Share on other sites
squonk 41,022 #5540 Posted June 28, 2020 Just now, rjg854 said: Got the horses out for a little fresh air and sunshine. Of course they wouldn't social distance, you know how horses can be. They sure look happy And the Bluebirds are saying "What the eck?" Share this post Link to post Share on other sites
Pullstart 62,787 #5541 Posted June 29, 2020 21 hours ago, Jhook said: Mowed my entire yard for the first time with me new (to me) 315-8. This is a very very steep hill. Pics dont show it at all. But the machine did great. Grass was soaking wet from all the rain yesterday and i hardly broke traction once. looking at the shed as a reference point, you can tell how far down the hill that is... or you really need to prop that shed up! Share this post Link to post Share on other sites
Pullstart 62,787 #5542 Posted June 29, 2020 14 hours ago, ebinmaine said: Trina, her mom, Meeha mirror, and I spent some quality time in the woods today. I pulled 4 loads out to the shed and they did a fair amount of splitting. Could've done a bit more but thunderstorms were rolling in... Trina snapped a pic of this neat mushroom. I wish video was better at showing inclination angle. This is a fairly steep climb for a few feet. Note zero work on the part of the big 16. not even a grunt. Just a lug lug 2 1 Share this post Link to post Share on other sites
WHX?? 48,776 #5543 Posted June 29, 2020 14 hours ago, rjg854 said: Got the horses out for a little fresh air and sunshine. Of course they wouldn't social distance, you know how horses can be. They sure look happy That is one fine looking herd there Randy! 2 1 Share this post Link to post Share on other sites
Jhook 849 #5544 Posted June 29, 2020 2 hours ago, pullstart said: looking at the shed as a reference point, you can tell how far down the hill that is... or you really need to prop that shed up! The shed is being torn down asap, as the wheelhorse does not fit inside. And i dont wanna leave it outside once i get it back from the paint shop, i will be putting up the harbor freight carport to house my jetski/wheelhorse and other toys 1 Share this post Link to post Share on other sites
Pullstart 62,787 #5545 Posted June 29, 2020 28 minutes ago, Jhook said: The shed is being torn down asap, as the wheelhorse does not fit inside. And i dont wanna leave it outside once i get it back from the paint shop, i will be putting up the harbor freight carport to house my jetski/wheelhorse and other toys Jet Ski? I used to have a collection of Kawasaki JS 440’s and 550’s! I miss ‘em all the time! Share this post Link to post Share on other sites
Jhook 849 #5546 Posted June 29, 2020 43 minutes ago, pullstart said: Jet Ski? I used to have a collection of Kawasaki JS 440’s and 550’s! I miss ‘em all the time! I currently ride a 96 kawasaki zxi1100. Never ridden a stand up before 1 Share this post Link to post Share on other sites
Pullstart 62,787 #5547 Posted June 29, 2020 Just now, Jhook said: I currently ride a 96 kawasaki zxi1100. Never ridden a stand up before they’re a blast... once you get the hang of them! It takes me about 30 minutes to get my bearings back every time I get the chance to hop on one... and I have about 32 minutes’ worth of energy! Share this post Link to post Share on other sites
johnnymag3 2,515 #5548 Posted June 29, 2020 spent the morning, polishing the release button, and scraping the adapter I received in the mail a few days ago....things will be looking better soon !! 4 Share this post Link to post Share on other sites
johnnymag3 2,515 #5549 Posted June 29, 2020 (edited) I think I have OCD when it comes to things being shiny and clean.....Im sorry Just want the 1257 to be a nice piece of Wheel Horse material left behind when im gone............Also the two 418 A Tractors... Life is short, but most dont realize just how short that is....60 years is a flash....2 million years is a long time Edited June 29, 2020 by johnnymag3 spelling 1 Share this post Link to post Share on other sites
