richmondred01 2,237 #4976 Posted June 1, 2020 It appears that #4 the stud hole has been enlarged most likely causing it to wobble. What does #2 look like? i have several complete assemblies PM with any questions. Share this post Link to post Share on other sites
LandoCommando214 82 #4977 Posted June 1, 2020 (edited) 56 minutes ago, richmondred01 said: It appears that #4 the stud hole has been enlarged most likely causing it to wobble. What does #2 look like? i have several complete assemblies PM with any questions. #2 looks pretty good. My suspicion is that since #4 was assembled behind #2, instead of in front of it as the diagram shows, it was able to wobble around inside the space because nothing was there to hold it in place. I think i'm going to need one. I really appreciate it. Edited June 1, 2020 by LandoCommando214 Share this post Link to post Share on other sites
Flat Thunder Channel 178 #4978 Posted June 1, 2020 I mowed lawn with the 704 today. It was a breeze as usual! During the ride I noticed the trailing wheels on my mower deck are looking pretty bad. Does anyone have a good/cheap source for this simple item? I normally go to Glen's Surplus, but don't really want to take the drive for such a simple part. 1 Share this post Link to post Share on other sites
Greentored 3,214 #4979 Posted June 1, 2020 Now that it quit monsooning here (12 inches of rain in 10 days) was able to put the 1277 to disc duty in the garden. Even dragged the little 8hp/4 speed out for wagon/mulch duty. That ones for sale. 4 2 Share this post Link to post Share on other sites
12Horse Paladin 1,038 #4980 Posted June 1, 2020 Well, now, it was done 'yesterday', but.... Might go n blow the garbage outta the nooks n crannies today (there's ALOT!); MAYBE see if im smart enough to pull the motor... I really have ALOT to learn; found this out just doing this, lol. But ill tell you what. Its kinda cool when you can do most things i have sofar with just a 3/8ths impact n a 1/2" wrench.😉🤣 Just think of all that money wasted on tools. Lol....NOPE, hahaha. Y'all have a great day, be safe n GodBless😊 8 1 Share this post Link to post Share on other sites
WHX?? 48,821 #4981 Posted June 1, 2020 Yesterday also but tweaked on my new to me 520. Carb & foot pedal adjustments & added a charger pigtail. Of all the tractors that have been through the stable this one is the first that needed no work! Cleaned out a stall next to her sister.... 10 1 1 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,577 #4982 Posted June 1, 2020 3 minutes ago, WHX24 said: Yesterday also but tweaked on my new to me 520. Carb & foot pedal adjustments & added a charger pigtail. Of all the tractors that have been through the stable this one is the first that needed no work! Cleaned out a stall next to her sister.... So... Your girl horses have antlers? 4 point by the looks of it... What kinda operation you runnin' there? 4 4 Share this post Link to post Share on other sites
WHX?? 48,821 #4983 Posted June 1, 2020 Good Eye Sylvia … was wondering if any of you eagle eyes were going to spot them! I should mount them on the roof redneck style! 2 1 1 Share this post Link to post Share on other sites
12Horse Paladin 1,038 #4984 Posted June 1, 2020 38 minutes ago, WHX24 said: Yesterday also but tweaked on my new to me 520. Carb & foot pedal adjustments & added a charger pigtail. Of all the tractors that have been through the stable this one is the first that needed no work! Cleaned out a stall next to her sister.... If i hep with cleaning up your shop n am quiet n stay outta the way, could i just come visit n hang out in it for a few weeks?😊 I could be your mucker, for your herd, n i promise not to eat much, lol. 5 Share this post Link to post Share on other sites
Goldnboy 920 #4985 Posted June 1, 2020 Put a deck on the GT1848 and mowed the first time with it since doing a refresh and engine swap. On to the next one B80-8 refresh to 14Hp and hydraulics... 4 1 1 Share this post Link to post Share on other sites
ebinmaine 67,530 #4986 Posted June 1, 2020 17 minutes ago, Goldnboy said: On to the next one B80-8 refresh to 14Hp and hydraulics That'll be cool to see. Are you changing to hydro transmission or adding hydraulics with a pump? Share this post Link to post Share on other sites
Goldnboy 920 #4987 Posted June 1, 2020 41 minutes ago, ebinmaine said: That'll be cool to see. Are you changing to hydro transmission or adding hydraulics with a pump? I started a thread but got side tracked but needing a backup mower before doing the swap and conversion 5 1 Share this post Link to post Share on other sites
12Horse Paladin 1,038 #4988 Posted June 2, 2020 (edited) Got a aittle farther along...didnt take much; even i newb like me could figure out howto pull it, since most of it was disconnected already when i got it, lol. ...can that bottom...bent piece... on the mule drive be replaced...? And Clara says hello, All😊 Edited June 2, 2020 by 12Horse Paladin 5 1 Share this post Link to post Share on other sites
ebinmaine 67,530 #4989 Posted June 2, 2020 6 hours ago, 12Horse Paladin said: bent piece Those are replaceable yes but you might very well be able to bend it back with a large bar of some sort 1 2 Share this post Link to post Share on other sites
JuneBuggyWuggy 2 #4990 Posted June 2, 2020 On 1/15/2018 at 10:28 AM, Ed Kennell said: Ok, maybe this will get us back on topic. Today I made a safety light and pole for the 312 plow tractor . I'm new to this. Don't know how start ask a question under my profile. Can somebody tell me how to test the "switching relay" on a 1992 wh 520h or bypass it? 1 Share this post Link to post Share on other sites
Pullstart 62,902 #4991 Posted June 2, 2020 14 minutes ago, JuneBuggyWuggy said: I'm new to this. Don't know how start ask a question under my profile. Can somebody tell me how to test the "switching relay" on a 1992 wh 520h or bypass it? There is an electrical based part of the forum that you might want to start a new post in. You can explain what is going on and what you’ve accomplished so far, maybe even share some pictures? I have no experience with 520’s, but have heard that the 9 pin connector is very vulnerable to corrosion and limits many functions on the machine. Share this post Link to post Share on other sites
Ed Kennell 38,181 #4992 Posted June 2, 2020 49 minutes ago, JuneBuggyWuggy said: I'm new to this. Don't know how start ask a question under my profile. Can somebody tell me how to test the "switching relay" on a 1992 wh 520h or bypass it? to the Wuggy. You can start a new thread by left clicking on the " +create " at the top of the home page. Then click on " topic" in the drop down. Then click on the appropriate forum in the select forum drop down. No need to go to your profile. Share this post Link to post Share on other sites
squonk 41,121 #4993 Posted June 2, 2020 On 6/1/2020 at 10:25 AM, WHX24 said: Yesterday also but tweaked on my new to me 520. Carb & foot pedal adjustments & added a charger pigtail. Of all the tractors that have been through the stable this one is the first that needed no work! Cleaned out a stall next to her sister.... Judging by the totes and fishin poles, someone has too much stuff! Share this post Link to post Share on other sites
squonk 41,121 #4994 Posted June 2, 2020 On 5/31/2020 at 8:00 AM, 953 nut said: Try a little Ospho on the rimes before you think about painting the rims. The Ospho will remove the rust and leave the patina behind. You can find it at Lowe's or anyplace that sells paint. Not at our Lowes. @rjg854 1 Share this post Link to post Share on other sites
953 nut 55,260 #4995 Posted June 2, 2020 4 hours ago, squonk said: Not at our Lowes. @rjg854 Got their own brand. https://www.lowes.com/pd/Klean-Strip-Concrete-and-Metal-Prep-1-GAL/1001456348 1 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,309 #4996 Posted June 3, 2020 @953 nut thanks for the info , I have never noticed it at my local Lowes before, have to check it out. Share this post Link to post Share on other sites
Lane Ranger 10,968 #4997 Posted June 3, 2020 Worked on my 701 front steering today and added a plate under one of my RJ seats to be lifted so I don’t scratch the fenders. 7 3 1 Share this post Link to post Share on other sites
squonk 41,121 #4998 Posted June 3, 2020 I got this 48" plough from Ed Dog about 4 years ago. I think it's about time I made it 1 color! Had the plow skid mounts made now to pretty things up. Back is done. No Steppenwolf was played watching the paint dry. Just a little Steve Hackett. Ordered new decals from Terry. going with a 60's motif as this plough will be going on my 953 A couple of days and we will do the other side. 6 4 Share this post Link to post Share on other sites
Pullstart 62,902 #4999 Posted June 3, 2020 Still got it all wrong Mike! Plough gets dragged to turn dirt, plow pushes things around 1 Share this post Link to post Share on other sites
squonk 41,121 #5000 Posted June 3, 2020 28 minutes ago, pullstart said: Still got it all wrong Mike! Plough gets dragged to turn dirt, plow pushes things around noun noun: plough 1. a large farming implement with one or more blades fixed in a frame, drawn by a tractor or by animals and used for cutting furrows in the soil and turning it over, especially to prepare for the planting of seeds. plow /plou/ Learn to pronounce See definitions in: All Farming Yoga Nautical noun 1. a large farming implement with one or more blades fixed in a frame, drawn by a tractor or by animals and used for cutting furrows in the soil and turning it over, especially to prepare for the planting of seeds. Sorry nothing about pushing Besides I "trademark" plough with my little smilie face 4 Share this post Link to post Share on other sites
