8ntruck 6,998 #4001 Posted January 28, 2020 I got a little CAD time over the weekend and drew up receiver hitch plans drawn up for my 14-8. Hopefully, I'll round up materials and get it tacked up in the not too distant future. 4 Share this post Link to post Share on other sites
Shed 248 #4002 Posted January 29, 2020 Well after trying to get threads cut into the pipe for exhaust I just went ahead and got two 6 inch pieces and a coupler no one will see it under the heat sheild.... now I just need to figure out how to make one 4 4 Share this post Link to post Share on other sites
Lee1977 6,656 #4003 Posted January 29, 2020 Had some storm damage with a large cedar tree. I finished pulling the limbs down with the Toyota. Used the Wheel Horse to get the generator and saws out there. Then hauled two trailer loads to the brush pile. 6 4 Share this post Link to post Share on other sites
Lane Ranger 10,968 #4004 Posted January 29, 2020 21 hours ago, Shed said: Well after trying to get threads cut into the pipe for exhaust I just went ahead and got two 6 inch pieces and a coupler no one will see it under the heat sheild.... now I just need to figure out how to make one SHED: You may need a five or four inch pipe on the end instead of the other six as the muffler may get too hot and burn the paint off the RJ Hood! And you have a very nice tractor there ! 2 Share this post Link to post Share on other sites
Ralph S 342 #4005 Posted January 30, 2020 Giving Big Ugly a face lift. 3 4 Share this post Link to post Share on other sites
Ralph S 342 #4006 Posted January 30, 2020 That's the before. When it's done I'll give ya the after 2 1 1 Share this post Link to post Share on other sites
The Tuul Crib 7,336 #4007 Posted February 1, 2020 I got out today to go for a ride around the property and to pick up trash that was thrown out by some foolish..... well.... you know ,anyway the old seat from the 520 I had on it finally broke. I've been trying to save my pristine seat that was on this tractor so I opted out for this one which was off one of my chargers which is grounded right now. 5 1 Share this post Link to post Share on other sites
Ralph S 342 #4008 Posted February 1, 2020 Started putting a face lift on the old girl. The factory paint is pretty crappy. Do they all peel or just the ones that I have ? 6 2 2 Share this post Link to post Share on other sites
Achto 27,565 #4009 Posted February 3, 2020 I started a "nontraditional" paint job on a today. The yellow shroud on the trouble light makes it look a little orange but it should have an even better bling factor in the sun light. A close up kinda shows the metallic content in the paint. 2 8 6 Share this post Link to post Share on other sites
WHX?? 48,815 #4010 Posted February 3, 2020 In the natural sun light gonna look sawwweet Dan.... 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #4011 Posted February 3, 2020 That looks awesome on Picts. Hope to see it in nature on the Big Show. 1 Share this post Link to post Share on other sites
Achto 27,565 #4012 Posted February 3, 2020 6 hours ago, Tractorhead said: Hope to see it in nature on the Big Show. This ones not for me, but I think that I can talk the owner into bringing it. 1 1 Share this post Link to post Share on other sites
19richie66 17,500 #4013 Posted February 3, 2020 Letting a couple of the kids get aquatinted with thier new digs 2 4 2 Share this post Link to post Share on other sites
ebinmaine 67,432 #4014 Posted February 3, 2020 20 minutes ago, 19richie66 said: aquatinted with thier new digs Easy there. Make sure to use a soothing voice and don't push too hard. 1 Share this post Link to post Share on other sites
WHX?? 48,815 #4015 Posted February 3, 2020 (edited) 4 hours ago, Achto said: This ones not for me, but I think that I can talk the owner into bringing it. Guy coming all the way from the fatherland almost have to bring it now! Missus coming back from her trip to Mexico maybe lay the frame on her side of the bed! Edited February 3, 2020 by WHX24 1 Share this post Link to post Share on other sites
tom2p 2,394 #4016 Posted February 4, 2020 On 1/29/2020 at 4:57 PM, Lee1977 said: Had some storm damage with a large cedar tree. I finished pulling the limbs down with the Toyota. Used the Wheel Horse to get the generator and saws out there. Then hauled two trailer loads to the brush pile. sweet lookin old Toyota truck ! 1 Share this post Link to post Share on other sites
Shed 248 #4017 Posted February 4, 2020 On 1/29/2020 at 5:34 PM, Lane Ranger said: SHED: You may need a five or four inch pipe on the end instead of the other six as the muffler may get too hot and burn the paint off the RJ Hood! And you have a very nice tractor there ! Maybe I'll try both then I dont want to burn the paint up thanks I'd like to use the kholer k90 but I just couldnt get it running and it didnt have a pull start and my kids will be enjoying it so this makes it safer 1 Share this post Link to post Share on other sites
Pullstart 62,837 #4018 Posted February 4, 2020 On 2/2/2020 at 8:33 PM, Achto said: I started a "nontraditional" paint job on a today. The yellow shroud on the trouble light makes it look a little orange but it should have an even better bling factor in the sun light. A close up kinda shows the metallic content in the paint. Looks great Dan! Can’t wait to see “said owner” riding in style! 1 Share this post Link to post Share on other sites
balconio 606 #4019 Posted February 5, 2020 Had a fire out in the woods after work: And later in the evening went for a night ride in the backwoods which is currently a muddy swamp. I got stuck a few times with the turf tires, luckily she's easy to push out. 4 5 Share this post Link to post Share on other sites
Pullstart 62,837 #4020 Posted February 5, 2020 9 hours ago, balconio said: Had a fire out in the woods after work: Skillet breakfast for dinner? I see the carton of eggs 2 1 Share this post Link to post Share on other sites
R. L. Addison 299 #4021 Posted February 8, 2020 Bought a 520h & brought it home yesterday (you guys gave me an itch for one) {no pictures} and stored it at my sons house until I can make room for it. Garage & drive are full and I've got to put a couple more together and hopefully get some sold. They will be workers, not show tractors, as I do not have facilities for painting. A 417h with a rebuilt K301 engine, and a couple C121's with option of various attachments,,[or none]. I have a tiller I haven't been able to sell alone, a dozer blade, and a deck or two. Maybe, hopefully I can get some things moving. R.A. 4 Share this post Link to post Share on other sites
ebinmaine 67,432 #4022 Posted February 9, 2020 I put a car battery in the Cinnamon horse a few weeks ago. Group 51 I think? I hadn't taken the time to properly fasten it down. Today I added an extension nut to the end of the battery tray stud and a bolt into it. @squonk and @Sparky you both noted that the high RPM was some higher than normal. Fixed that as well. Also adjusted the carb mixture in high and low. She's a happy horsey now. 2 2 Share this post Link to post Share on other sites
WHX?? 48,815 #4023 Posted February 10, 2020 Prepped a round hood for final paint. . Not perfect but close enough for the women we go out with! 3 1 1 Share this post Link to post Share on other sites
FAST 87 #4024 Posted February 10, 2020 Finally got some seat time 5 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #4025 Posted February 10, 2020 Aaaaaahhhh, still no snow here, just several Storm damages. Pavillion lost it‘s roof and the Plane on the Horse is away.... 🤪 2 Share this post Link to post Share on other sites
