What have you done to your Wheel Horse today?

[McGrew 460]

Achto,  Sure thing!  I’m pretty someone on this website posted a pic of a similar, if not identical voltmeter on their tractor, but the link to the one I bought is here:  https://www.ebay.com/itm/US-Ship-DC-12V-LED-Panel-Digital-Voltage-Meter-Display-Voltmeter-Car-Motorcycle/122085414438?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

 

I was wrong about the price...  It was $7.99...  I’ve mentioned before, I’m cheap!  The cotter pin through the throttle knob was a necessity...  Before I modified the linkage, the throttle was so hard to pull the knob started spinning on the shaft when I tried to lock it.  The cotter pi solved that.  At least for now.  Will have to see how long it lasts!  Thanks!  Danny

[Tractorhead 9,064]

 

have the same Voltmeter installed.

 

allway‘s a good feeling, to see the Voltage is in proper range

 

found mine at *bay, price one piece about 8€,

10 pieces each 2€. so i simply ordered 10 pieces, to have spare for some other purposes.

Edited November 6, 2019 by Tractorhead

[JoeliusZ28 77]

This fall i installed tri-rib front tires to make steering easier with the snowblower (cant believe how much easier it steers now), and also did a trans flush.  Then i used it to turn the garden over.  Looking for a tiller attachment before next spring, the furrow plow just doesn’t break everything up no matter how many passes you make.

Edited November 6, 2019 by JoeliusZ28

[Herder 2,354]

17 minutes ago, JoeliusZ28 said:

This fall i installed tri-rib front tires to make steering easier with the snowblower (cant believe how much easier it steers now), and also did a trans flush.  Then i used it to turn the garden over.  Looking for a tiller attachment before next spring, the furrow plow just doesn’t break everything up no matter how many passes you make.

The tri-ribs look nice.  Are they the firestone 16/6.5-8?

[cleat 6,004]

A plow is only designed to turn the soil not break it up.

 

You need either a tiller or a disk harrow to break it up more.

[953 nut 55,261]

23 hours ago, pullstart said:

Hot Wheels has the same volt meter, maybe @953 nut knows the source too?

$ 4.23 shipped from the orient (China).

https://www.ebay.com/itm/Mini-Round-DC-12V-24V-LED-Car-Boat-Digital-Display-Voltmeter-Meter-4Colors/272705984613?var=571839844235

[Pullstart 62,902]

19 hours ago, JoeliusZ28 said:

This fall i installed tri-rib front tires to make steering easier with the snowblower (cant believe how much easier it steers now), and also did a trans flush.  Then i used it to turn the garden over.  Looking for a tiller attachment before next spring, the furrow plow just doesn’t break everything up no matter how many passes you make.

 

That soil looks like it might benefit from just a disc, after you’ve plowed it.  Looks great!

[DevonianHorse 271]

Earlier in the year, the Horse was not happy and then eventually stopped running completely, it had a replacement ignition switch (the old one had loose terminals) and a carb service and it is good as new  Just did some odd jobs around the garden, can't say how good it is to have the Horse up and running again  It has quite an easy life but beats pushing a wheelbarrow around all day 

 

 

[rjg854 11,368]

Had a slow leak on a rear tire that's been a real PITA.  Broke the tire down cleaned up the bead on the rim and made sure the tire was nice and clean. I think I may have got a good seal on it now. It's an original  tire , but it's still in pretty decent shape. 

[DBlackston 298]

Put the head back on the K181 on the 854.

 

Finished putting the HY-3 pump back together and got it and the cylinder mounted.

 

 

 

Test fit the hood stand fittings for my HY-3 rockshaft build.

 

 

[Bear G 690]

Stretch Modifications

I removed the old bumper (1st pic) and installed new brush guard. Also moved the air tank to where the battery used to be. Added air pressure gauge. Installed another set of horns on the right side to better match left side. 
New aluminum wheels & tires.

Hope Karl Storhy will approve.

[Super-C 4 me 612]

Getting ready for winter had make a make shift shed for 6 tractors.

Also got the Xi ready, new aluminum bumper, aluminum grill, and got the plow mounted 

[Pullstart 62,902]

@Bear G good to see you on here!

 

 I bet @Shynon ...

 

can’t wait to hear the (horn) changes comin’

 comin’ ‘round the horse stalls,

he ain’t heard the horns since

last July in Portage WI

 

that was a poor rendition of a good country song I know!  I bet Stretch sounds as good blowing steam as it does revving up!

[Shynon 7,459]

37 minutes ago, pullstart said:

can’t wait to hear the (horn) changes comin’

sure can, not even counting the days

[Bear G 690]

1 hour ago, Shynon said:

sure can, not even counting the days

Betting I know where you prefer I mount the new horns. 
I’d be able to blow them if I ate enough beans. 
 

[pfrederi 17,741]

Something that doesn't happen much around here...shipping out a WH.  Loaded up a Charger 12 that I have fixed up for my older brother to use.  He has a Ford 8N for the driveway but up around the house and paths for the dog he was wrestling with an old walk behind blower.  This will be easier for him.  In addition to the wheel weights I have 70 lbs of weights to go on the 2" receiver hitch.

[WHX?? 48,821]

Gotta like the loading ramp Paul! 

[pfrederi 17,741]

Woke up the snow horses and got them out of the storage shed and up to the shop.  I swear they put a poison pill in the batteries these days so they crater right after their 3rd Birthday.

 

 

[Tractorhead 9,064]

I still guess, there was no poison at all in the game, the horses are simply offended...

 

that‘s the revenge of them, they simply empty the batteries to annoy you.

 

😂

[Sparky-(Admin) 21,318]

Winter prep oil change (10w/30)

[Andy N. 2,154]

Got the herd officially ready for winter. Plus for anyone that wants to see the difference between LED and original Halogen headlights. 

Edited November 15, 2019 by Andy N.

[12Horse Paladin 1,038]

On 11/14/2019 at 3:24 PM, Sparky said:

Winter prep oil change (10w/30)

WORK HORSE!

I sure hope to find one of those, someday, just because!!!😊❤

👍👍

[DBlackston 298]

Took the wife for a ride while the weather was nice.

 

First time Ive gotten to ride a wheel horse around. I have 3 but this is the first one to run and move under its own power.

 

So excited to use it in the garden!

 

[ebinmaine 67,535]

51 minutes ago, DBlackston said:

the wife

When does she get her own?

[WHX?? 48,821]

Ain't nothin like nice tub ride to get them in the mood @DBlackston

You know we all got a problem when we all sport lumber when @Sparky changes his oil!

 on those lights & horses @Andy N.

I ain't gonna start a thread just for this so I'll use this catch all thread for this  but the Missus had this made at a Walgreens the other day. Dan @Achto took this at a recent show and our favorite....... Dan

 

Actually did work on a horse today ...since @WVHillbilly520H wasn't gonna come finnish this for me and someone said it's winter coming on figured might as well pick up where I procrastinated last winter... mod to a deuce. Thank you also @Kurt-NEPA The bolts are loose since the parts are a tacky red yet .... yah .....I love watching paint dry!  

Edited November 17, 2019 by WHX24