Shynon 7,459 #3126 Posted September 28, 2019 Clamps made and bolted on, little paint and a tire. 3 6 Share this post Link to post Share on other sites
ebinmaine 67,455 #3127 Posted September 28, 2019 Awesome work there @Shynon tom 1 Share this post Link to post Share on other sites
ebinmaine 67,455 #3128 Posted September 28, 2019 My honey and I had a great day of yard puttering and organizing. She spent a lot of today disassembling, sanding, and repainting the wood stove that we will be putting upstairs. I'll post a couple pics of that in another section. I did a bunch of organizing. Cleared out a spot in the forest next to the parts and project tractors for some pallets so I can lay my parts assortment out in a much more organized and protected manner. I still have a few things to put out there but for the most part everything is in its place and just waiting to be covered. I also took a little while and messed around with the idler pulley on the Cinnamon Horse. I tried installing a cast-iron idler and I wasn't super pleased with the way the belt set on it. It was high in the groove... so I took it back off. I managed to remove the dust seal from the bearing in the existing idler and I sprayed it out with brake clean and then put dry lube in there. Ordered a new part but this one should be okay for a little while more. 4 1 Share this post Link to post Share on other sites
squonk 41,079 #3129 Posted September 28, 2019 Been smelling gas in the garage for a week. Didn't see any stains on the concrete or puddles. This morning I opened the overhead door and could smell it from 100 ft. away. Found the leak in the C-160 gas tank. Thought it was a bad grommet but turned into a seam leak. I still had a tank off of a parts tractor in my basement. Been there for about 8 yrs. 4 Share this post Link to post Share on other sites
ericj 1,578 #3130 Posted September 28, 2019 1 hour ago, squonk said: Been there for about 8 yrs And the anti hoarders say if you ain't used it in a year get rid of it RIGHT , this is why I, we never get rid of anything, at least tractor related eric j 3 Share this post Link to post Share on other sites
ebinmaine 67,455 #3131 Posted September 29, 2019 10 hours ago, ericj said: And the anti hoarders say if you ain't used it in a year get rid of it RIGHT , this is why I, we never get rid of anything, at least tractor related eric j Extra food? Stock of household supplies? Family heirlooms? Tractor stuff..... That's where it's at. 1 Share this post Link to post Share on other sites
Pullstart 62,840 #3132 Posted September 29, 2019 On 9/28/2019 at 2:45 AM, PeacemakerJack said: Plow Day is coming up soon...between you, Kevin, and Jim posting your prep work makes me even more excited about turning earth. Do you got your lights working on that thing for night plowing? I hope I have time to accomplish everything I need to get done before the 18th! Currently Hot Wheels isn’t charging. Between Richard and I talking, checking my fuses is in order and I’ll have a spare regulator on hand when I get home. 2 Share this post Link to post Share on other sites
adsm08 2,048 #3133 Posted September 29, 2019 1 hour ago, pullstart said: I hope I have time to accomplish everything I need to get done before the 18th! Currently Hot Wheels isn’t charging. Between Richard and I talking, checking my fuses is in order and I’ll have a spare regulator on hand when I get home. Must be something in the water. You have one down, I have one confirmed down and another questionable, and there is at least one other thread from this week about charging issues. Share this post Link to post Share on other sites
Lee1977 6,657 #3134 Posted September 29, 2019 18 hours ago, ericj said: eric j 1 Share this post Link to post Share on other sites
oldredrider 2,548 #3135 Posted September 29, 2019 Put air in my tires today. Only 3 of them needed air. Wore me out. Dang! These thing are HIGH MAINTENANCE!!! 7 Share this post Link to post Share on other sites
Ed Kennell 38,159 #3136 Posted September 29, 2019 5 minutes ago, oldredrider said: Put air in my tires today. Only 3 of them needed air. Wore me out. Dang! These thing are HIGH MAINTENANCE!!! Next time try using a pump. Blowing them up by mouth is exhausting. 1 9 1 Share this post Link to post Share on other sites
WHX?? 48,815 #3137 Posted September 29, 2019 I got some extra tires @Shynon you need some rubber Tom. 2 Share this post Link to post Share on other sites
Burnerman 758 #3138 Posted October 2, 2019 My new wheel bearings showed up today. 👍 I was very pleasantly surprised by the fact they’re super beefy compared to the ones it my front rims. But even happier to see they’re made in USA about 40 min away. 3 5 Share this post Link to post Share on other sites
adsm08 2,048 #3139 Posted October 3, 2019 (edited) I took the starter to work and tore it down. Confused most of my younger co-workers. I can't get the big screws that hold the field coils to the sides of the case out though. I'm gonna keep spraying and beating them until Saturday, but does anyone know a source for replacements if I have to destroy them? Edited October 3, 2019 by adsm08 Share this post Link to post Share on other sites
Lee1977 6,657 #3140 Posted October 3, 2019 (edited) I ordered a new belt and clutch spring last Saturday It came today so in install them. The spring was broken when I got 5 years ago and had a 1/2" vee belt.I did a better job on fixing the spring and used the belt. It got to wanted to jump 3 or 4 time when starting off. I changed to an old drive belt I had and it was better going forward but still jumped in reverse. So the new belt and spring. Edited October 4, 2019 by Lee1977 5 Share this post Link to post Share on other sites
Pullstart 62,840 #3141 Posted October 3, 2019 On 9/29/2019 at 12:31 PM, pullstart said: I hope I have time to accomplish everything I need to get done before the 18th! Currently Hot Wheels isn’t charging. Between Richard and I talking, checking my fuses is in order and I’ll have a spare regulator on hand when I get home. Well, my charging issue is fixed! It’s always great to find that I am the cause of the problem! Back when I tidied up the wiring, I pulled the regulator wire too tight and it hopped off the key switch! Easy peasy! 6 1 Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #3142 Posted October 3, 2019 Swapped to the fatties on my cruiser for this weekends tractor/machinery show. 5 7 3 Share this post Link to post Share on other sites
wallfish 16,994 #3143 Posted October 4, 2019 2 hours ago, Sparky said: Swapped to the fatties on my cruiser for this weekends tractor/machinery show. Your girl friends are gonna be riding on the back? Oh sorry, didn't look at the pics. 7 Share this post Link to post Share on other sites
WHX?? 48,815 #3144 Posted October 4, 2019 Got a heavy date Sparkeye? 3 Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #3145 Posted October 4, 2019 9 hours ago, WHX24 said: Got a heavy date Sparkeye? Yes I do! Gruesome wallflower, goes by the name @wallfish....its a pity date of course 1 3 Share this post Link to post Share on other sites
Pullstart 62,840 #3146 Posted October 4, 2019 I like said fatties @Sparky! 1 1 Share this post Link to post Share on other sites
WHX?? 48,815 #3147 Posted October 4, 2019 Lol Sparky... I would make him pay on said date! Those tires look to be similar to the ones on my plow tractor and they do run wide for just 10.50's 3 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #3148 Posted October 4, 2019 3 hours ago, Sparky said: pity date 3 Share this post Link to post Share on other sites
AMC RULES 37,130 #3149 Posted October 4, 2019 With a fish! 1 Share this post Link to post Share on other sites
D_Mac 8,610 #3150 Posted October 5, 2019 Finished putting the gear box back together and installing it all back under the little RR-65. After that decided to pull the carb off for a good cleaning and replace the fuel lines that were hard as a rock. The thing hasnt been worked on in 50 years. Ordered the carb kit and have the rest of it soaking in the cleaner. Keeping my fingers crossed that I got the transmission all back together right. Find out when I get the carb installed 1 7 1 Share this post Link to post Share on other sites
