19richie66 17,508 #1776 Posted January 14, 2019 “HANDS UP AND STEP AWAY FROM THE WELDER” I am not the greatest welder but good grief people. I tried disassembly of the gt14 rototiller I got with “Rusty” the gt14. Someone had “welded” angle iron to the main frame and I couldn’t get it apart without cutting them off. Not to mention everything is rusted together and the gearbox is shot. The bearings wore out and the shaft ate into the housing. So scrap one gt14 rototiller! I did keep the three point mount and brackets for a rear blade I can make. Also the mid mount I bought must have been welded by Ray Charles fabricating. Half a C clamp welded to a pivoting bracket with a crank handle and u-joint hooked to the c-clamp. Some people. Good idea but poor excecution. Had to cut all that off and now have to cut off the plate they welded on to make it pivot(so you can grade a ditch at a angle I guess). Got a good deal but I’m having to work for it.👍 3 5 1 Share this post Link to post Share on other sites
Lee1977 6,664 #1777 Posted January 15, 2019 (edited) On 1/14/2019 at 6:55 PM, 19richie66 said: “HANDS UP AND STEP AWAY FROM THE WELDER” I am not the greatest welder but good grief people. I tried disassembly of the gt14 rototiller I got with “Rusty” the gt14. Someone had “welded” angle iron to the main frame and I couldn’t get it apart without cutting them off. Not to mention everything is rusted together and the gearbox is shot. The bearings wore out and the shaft ate into the housing. So scrap one gt14 rototiller! I did keep the three point mount and brackets for a rear blade I can make. Also the mid mount I bought must have been welded by Ray Charles fabricating. Half a C clamp welded to a pivoting bracket with a crank handle and u-joint hooked to the c-clamp. Some people. Good idea but poor excecution. Had to cut all that off and now have to cut off the plate they welded on to make it pivot(so you can grade a ditch at a angle I guess). Got a good deal but I’m having to work for it.👍 I know all about blind welding, I have got that way myself. Can't see anything but the flash, had to give up welding. Getting old is rough can't get anything to work like it should. Edited January 16, 2019 by Lee1977 3 Share this post Link to post Share on other sites
WHX?? 48,828 #1778 Posted January 15, 2019 Hilarious Ritchie... thems what we call "farmer welds" ! Now you know why I pay Dan @Achto to be my welder friend! 7 Share this post Link to post Share on other sites
953 nut 55,297 #1779 Posted January 15, 2019 Richie, any of those pictures would have been a great "Caption This". 2 Share this post Link to post Share on other sites
pfrederi 17,741 #1780 Posted January 15, 2019 Let me be clear I have never had a GT 14 tiller or blade. Those are not my welds (even if they look a lot like mine) 1 5 Share this post Link to post Share on other sites
Sarge 3,463 #1781 Posted January 16, 2019 Must have been the same one that welded the scab parts on my D180 front blade - except in that case he used SuperMissle 100 rod, which is easily about the hardest rod in the world to grind or cut off later. I ended up making all new parts for it out of heavier steel and used low-hydrogen 7018 - nice and strong, yet ductile. I do a lot of stick work at my job but easily get out of practice these days - it is a skill worth keeping or learning how to do correctly. No excuse for hack work, especially if it is something that can fail and cause any sort of injury. It is not that tough to learn - beg, borrow or trade out work for someone to teach you at least the basics - you'll never regret it. Sarge 5 Share this post Link to post Share on other sites
608KEB 795 #1782 Posted January 17, 2019 On 1/14/2019 at 7:28 PM, WHX21 said: Hilarious Ritchie... thems what we call "farmer welds" ! Now you know why I pay Dan @Achto to be my welder friend! "Farmer Welds"? That hurts! 2 1 1 Share this post Link to post Share on other sites
ohiofarmer 3,276 #1783 Posted January 17, 2019 On 1/14/2019 at 8:28 PM, WHX21 said: Hilarious Ritchie... thems what we call "farmer welds" ! Now you know why I pay Dan @Achto to be my welder friend! Do you see who just posted? Look to the LEFT... [I guess the truth hurts -at least when it comes to my welding abilities] But Ray Charles Fabricating --- Now I have to clean my off the screen! 7 Share this post Link to post Share on other sites
953 nut 55,297 #1784 Posted January 17, 2019 (edited) Where I grew up farmers tended to be good craftsmen and took pride in their welds, that type of welds were called "Gorilla Welds". No offence to gorillas! Edited January 17, 2019 by 953 nut 4 Share this post Link to post Share on other sites
WHX?? 48,828 #1785 Posted January 17, 2019 No offence farmer Ohio and farmer 608... when I worked on farms I've seen a guy trying to weld with a rosebud on the cutting torch and a coat hanger! Had to patch things up quick ... crops to get off! 2 1 Share this post Link to post Share on other sites
953 nut 55,297 #1786 Posted January 17, 2019 5 hours ago, WHX21 said: No offence farmer Ohio and farmer 608... when I worked on farms I've seen a guy trying to weld with a rosebud on the cutting torch and a coat hanger! Had to patch things up quick ... crops to get off! TRUE, but once the urgent need to get the crop off the field before the weather turned bad, that piece would be properly repaired to make it ready for the next harvest. 2 Share this post Link to post Share on other sites
19richie66 17,508 #1787 Posted January 18, 2019 (edited) Well I still don’t know what the future holds for “Rusty” but last night I cut the butchered hood and hinge off it and put the right grille back on it. At least it looks more like a gt14. The engine is froze up but I’m not sure if it is a valve hung up or if the piston is locked tight. Have to pull the head. May stuff the magnum 12 I have in it just to test the hydro. If thats good, there might be hope for Rusty yet.👍 Definitely can use it for patina practice. Edited January 18, 2019 by 19richie66 2 3 Share this post Link to post Share on other sites
Lane Ranger 10,968 #1788 Posted January 18, 2019 Rodney: Has parts at the Avon Park Florida Flywheelers this week Richie! 1 Share this post Link to post Share on other sites
19richie66 17,508 #1789 Posted January 18, 2019 I’ll be there tomorrow. He has a hood for me 1 Share this post Link to post Share on other sites
Pullstart 62,905 #1790 Posted January 18, 2019 First tractor in quite some time to show up at your place mostly the same color... 2 Share this post Link to post Share on other sites
19richie66 17,508 #1791 Posted January 18, 2019 Yes it is 😂 Share this post Link to post Share on other sites
oneroadkingman 53 #1792 Posted January 18, 2019 well today i ordered a new fuel pump,carb rebuild kit and a muffler fo my 520 2 Share this post Link to post Share on other sites
ACman 7,618 #1793 Posted January 19, 2019 (edited) Son got the 520 Wheel-a-Matic with the snowblower out and ready along with the Kubota BX2230 w/FEL and back blade . First time one of the Horses has been touched since last March. Don’t have a current pic but here’s one while it was patiently waiting. Will get some current pics tomorrow. Maybe some action shots or video depending how accurate the weatherman is . Edited January 19, 2019 by ACman 2 9 Share this post Link to post Share on other sites
Ed Kennell 38,209 #1794 Posted January 19, 2019 A tall chute wanna bee ? 1 Share this post Link to post Share on other sites
rjg854 11,378 #1795 Posted January 19, 2019 Started up the plow tractor and the snow blower, ran them up and down the 1/4 mile driveway, just to be sure they were ready for the snow we're supposed to get. Now they're calling for 12-20" of the white stuff, with very low temperatures and high winds. Ought to make for an interesting weekend and some decent seat time. 3 Share this post Link to post Share on other sites
Lane Ranger 10,968 #1796 Posted January 19, 2019 (edited) Yes, it is going to get interesting tonight and tomorrow! Edited January 19, 2019 by Lane Ranger 1 Share this post Link to post Share on other sites
Chris G 3,296 #1797 Posted January 19, 2019 Me and the Custom 702 got about 2 hours of seat time earlier today and probably gonna get round 2 of seat time in about another hour or so!!! Love some seat time, best therapy out there in my book. 5 Share this post Link to post Share on other sites
ebinmaine 67,592 #1798 Posted January 19, 2019 I went and took a few minutes to find a correct size bolt and reattach the stack to the muffler on the 1267. Let it run for a good 15 or 20 minutes to help charge the battery a bit. Got it and both snowblowers all gassed up and ready for the snow. 3 Share this post Link to post Share on other sites
AMC RULES 37,130 #1799 Posted January 19, 2019 A few picts in action make it even better. 5 Share this post Link to post Share on other sites
ebinmaine 67,592 #1800 Posted January 19, 2019 2 minutes ago, AMC RULES said: A few picts in action make it even better. I've already advised my photographer of the request for snow plowing action tomorrow. 2 Share this post Link to post Share on other sites
