Lane Ranger 10,968 #1751 Posted January 9, 2019 (edited) Six inch spindles on 319/312 will hold the eight inch wheels! I always thought the spindles were shorter when the six inch wheels were used! Edited January 9, 2019 by Lane Ranger 2 Share this post Link to post Share on other sites
cleat 5,957 #1752 Posted January 9, 2019 Spindles are longer height wise for the 6" wheels to keep the tractor level. 5 Share this post Link to post Share on other sites
Lee1977 6,659 #1753 Posted January 10, 2019 I hooked up the wagon to the 312-8 went over to the farm and cut some fire wood from a downed tree. I didn't take any pictures so I know it didn't happen, but a load of fire wood appeared out side the basement door. 2 4 Share this post Link to post Share on other sites
AMC RULES 37,130 #1754 Posted January 10, 2019 Sounds like a miracle happened there today. 2 Share this post Link to post Share on other sites
702 timmy 25 #1755 Posted January 10, 2019 On 4/26/2018 at 9:39 PM, WHX21 said: Did I mention generations beyond Dells? Remind me to leave a link in my will to that jeep cable...the projects i got goin on fer now she gets a generic and worked! thank you for this I found them on e-bay sold through jc whitney and they are also goverment surplus bought a pair for 30 dollars thanks again 1 Share this post Link to post Share on other sites
WHX?? 48,815 #1756 Posted January 10, 2019 Your welcome Timmy.. throw up pic & of them would like to see how they look. I was looking at these https://www.ebay.com/itm/MB-GPW-Willys-Ford-WWII-Jeep-G503-Dodge-CCKW-Chevy-Truck-Choke-Throttle-Cable/183520426914?epid=866896280&hash=item2abaab7ba2:g:OGcAAOSwMgdX2Agv:rk:10:pf:0 Share this post Link to post Share on other sites
702 timmy 25 #1757 Posted January 10, 2019 , that's the ones that I ordered Share this post Link to post Share on other sites
702 timmy 25 #1758 Posted January 11, 2019 On 6/30/2018 at 3:54 PM, kto434 said: I mowed part of my yard with each. Great mowcheens! where can I get seat covers like these? 1 Share this post Link to post Share on other sites
Lane Ranger 10,968 #1759 Posted January 11, 2019 (edited) Went out this am at my brother David's place to see if the 314 Wheel Horse was all ready for removing snow in the drive . We are expected to receive a good bit of snow tonight and Saturday. As I got ready to start the tractor I found out the choke cable was frozen and would not move. So I used a technique that I have used before. Brought out a hair dryer and set it on the handle, cable and motor linkage for a few minutes. Loosened up and I then sanded the choke handle end and lubed with grease. Works great now! So should start right away. Edited January 11, 2019 by Lane Ranger 6 Share this post Link to post Share on other sites
ebinmaine 67,487 #1760 Posted January 11, 2019 4 minutes ago, Lane Ranger said: Went out this am at my brother David's place to see if the 314 Wheel Horse was all ready for removing snow in the drive . We are expected to receive a good bit of snow tonight and Saturday. As I got ready to start the tractor I found out the choke cable was frozen and would not move. So I used a technique that I have used before. Brought out a hair dryer and set it on the handle, cable and motor linkage for a few minutes. Loosened up and I then sanded the choke handle end and lubed with grease. Works great now! So should start right away.bn That's good info n an awesome trick right there 1 Share this post Link to post Share on other sites
ztnoo 2,298 #1761 Posted January 11, 2019 (edited) @Lane Ranger, Well, I'll be getting ready here too Lane. NOAA says between 2-5", so pick a number. It's suppose to be much more in southern Indiana. All we have had so far is a light dusting twice in late November. I haven't even gotten the "Queen Toro" walk behind snowblower out of the shed yet this winter. I'll be doing that this afternoon and putting it in our attached garage. The name comes from my wife because she owned it before we were married 11 1/2 years ago. She joked then it was her dowry to me, and we still laugh about that. Edited January 12, 2019 by ztnoo 3 1 3 Share this post Link to post Share on other sites
702 timmy 25 #1762 Posted January 11, 2019 19 hours ago, WHX21 said: Your welcome Timmy.. throw up pic & of them would like to see how they look. I was looking at these https://www.ebay.com/itm/MB-GPW-Willys-Ford-WWII-Jeep-G503-Dodge-CCKW-Chevy-Truck-Choke-Throttle-Cable/183520426914?epid=866896280&hash=item2abaab7ba2:g:OGcAAOSwMgdX2Agv:rk:10:pf:0 It will be a while for the pics as it is hidden behind my brothers two model a's I saw you pics and did not want to wait until I needed them to order I will have forgot where I found this thread Share this post Link to post Share on other sites
WHX?? 48,815 #1763 Posted January 11, 2019 5 hours ago, ztnoo said: She joked then it was her dowry to me, Geez all I got for a dowry was a 16-38HXL vertical....guess I just got tired of waiting for the right woman with a C-160 to come along! 3 hours ago, 702 timmy said: hidden behind my brothers two model a's Well hows 'bout some of them Model A's then?!?!? 2 1 Share this post Link to post Share on other sites
LengerichKA88 1,883 #1764 Posted January 12, 2019 (edited) I finally got to play in the snow!! I only did one pass for the sake of saying I did... that one pass taught me that I need more weight, and more traction. But dang it, I got to push! 😂😂 Figured you’d rather see my wife’s pretty face rather than my old mug 😂 After working, I took the Charger 10 out to play for a bit. Everyone else was shoveling and I was playing Edited January 12, 2019 by KyleLengerich 3 7 Share this post Link to post Share on other sites
pfrederi 17,739 #1765 Posted January 12, 2019 Breaking down some tires so I can sand blast the wheels. Dummy me forgot to bring them into the heated part of the shop last night It was 11 degrees this morning.. Cold stiff old tires are harder to deal with. 1 1 Share this post Link to post Share on other sites
peter lena 8,625 #1766 Posted January 12, 2019 never liked the 6" wheel , always thought it made the tractor look cheaper, always changed over to the 8" wheel , retaining the old school look. pete 3 Share this post Link to post Share on other sites
LengerichKA88 1,883 #1767 Posted January 12, 2019 29 minutes ago, peter lena said: never liked the 6" wheel , always thought it made the tractor look cheaper, always changed over to the 8" wheel , retaining the old school look. pete Eventually I’m going to put a nice set of Tri Ribs on the front and AGs on the back, I prefer the old school look too. I do have a birthday coming up, I might ask for em 😂 2 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #1768 Posted January 12, 2019 3 hours ago, KyleLengerich said: I finally got to play in the snow!! I only did one pass for the sake of saying I did... that one pass taught me that I need more weight, and more traction. But dang it, I got to push! 😂😂 Figured you’d rather see my wife’s pretty face rather than my old mug 😂 After working, I took the Charger 10 out to play for a bit. Everyone else was shoveling and I was playing Was never a fan of the "chevron" tread pattern prefered the "peanut" tread pattern turf tires, but I am down for some AG bar tires. 2 Share this post Link to post Share on other sites
LengerichKA88 1,883 #1769 Posted January 12, 2019 8 minutes ago, WVHillbilly520H said: Was never a fan of the "chevron" tread pattern prefered the "peanut" tread pattern turf tires, but I am down for some AG bar tires. The ones on there are the set I picked up from Lowe’s to use as a floating set. I have plans for them in the future, but for the time being they’re way safer than the ones that were on there. its going to be some time before it looks like I picture in my head, but that Charger 10 is going to look like a Farmall H one of these days. 3 Share this post Link to post Share on other sites
LengerichKA88 1,883 #1770 Posted January 12, 2019 @bmiller0457, gotta question, and anyone else feel free to chime in, but what is this/what’s it do? That’s something that’s not on my Charger 10. I’m guessing it’s hydraulic controls for implements? 2 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #1771 Posted January 12, 2019 3 minutes ago, KyleLengerich said: @bmiller0457, gotta question, and anyone else feel free to chime in, but what is this/what’s it do? That’s something that’s not on my Charger 10. I’m guessing it’s hydraulic controls for implements? You are correct. 2 1 Share this post Link to post Share on other sites
pfrederi 17,739 #1772 Posted January 12, 2019 If you are not going to use the hydraulic lift you MUST remove the implement relief valve from the pump and move the charge pump relief valve to that position. If not you will damage the system. 1 Share this post Link to post Share on other sites
Super-C 4 me 612 #1773 Posted January 13, 2019 3 hours ago, KyleLengerich said: @bmiller0457, gotta question, and anyone else feel free to chime in, but what is this/what’s it do? That’s something that’s not on my Charger 10. I’m guessing it’s hydraulic controls for implements? You can find them for sale Typically someone parting out a tractor Share this post Link to post Share on other sites
702 timmy 25 #1774 Posted January 14, 2019 On 1/11/2019 at 3:57 PM, WHX21 said: Geez all I got for a dowry was a 16-38HXL vertical....guess I just got tired of waiting for the right woman with a C-160 to come along! Well hows 'bout some of them Model A's then?!?!? right now they are in bags for the winter Share this post Link to post Share on other sites
Shed 248 #1775 Posted January 14, 2019 Well I got a great deal on a predator 212 6.5 hp motor. I was not a fan of the briggs that was on my suburban it was to big to much stuff and didnt allow me to run the factory wheel horse fuel tank. So as I was unable to find the original motor I wanted something else. These motors have a huge aftermarket following too. I also am running a cintrfical gokart clutch and chain so all you need to do is incress rpm and it moves it will be better for my kid to run. It will still have a cover I'll need to make and they even make an electric start kit which my suburban had originally (I believe) either way it be cool 3 2 Share this post Link to post Share on other sites
