Goldann520 241 #851 Posted July 1, 2018 6 hours ago, ebinmaine said: Whoa. Whoa.... Well at least they aren't green. Easy now! 😊 2 Share this post Link to post Share on other sites
PeacemakerJack 10,738 #852 Posted July 1, 2018 4 hours ago, Shynon said: Put the lights on the 701 A set of AG’s, some weights, an 8” Brinly, and you are ready for some night plowing! 5 2 Share this post Link to post Share on other sites
rjg854 11,378 #853 Posted July 1, 2018 Great set of some rare lights, Craig is right on, awesomeness 2 1 Share this post Link to post Share on other sites
rjg854 11,378 #854 Posted July 2, 2018 Well being close to a hundred degrees the last couple days I spent that time in the barn with the a/C on working on the tractors. I started putting on things I got at the Big Show . Took the tall chute blower apart and ordered bearings and the idler sprockets it needs. Put new deck wheels on the 42 inch RD deck I bought. I'd like to find the double D blades it needs at some time too. Started cleaning up the rims on the Commandos they're looking kinda rusty. I know I can find lots to do out in barn in order to beat the heat. My job building houses has me outside year round so any opportunity to be this heat, I'm all over it. 5 2 Share this post Link to post Share on other sites
Thatoneguy 197 #855 Posted July 2, 2018 (edited) On 6/30/2018 at 5:08 AM, ebinmaine said: Can you get me a length measurement? I'll see what I have here. They are 9 1/2” I also need the ball for the inside and outside if you have that as well. Thank you, Edited July 2, 2018 by mower Share this post Link to post Share on other sites
ebinmaine 67,588 #856 Posted July 2, 2018 4 minutes ago, mower said: They are 9 1/2” I also need the ball for the inside and outside if you have that as well. Thank you, I'll take a look tomorrow evening for you. 1 Share this post Link to post Share on other sites
PeacemakerJack 10,738 #857 Posted July 2, 2018 Some father/son time in the corral this afternoon... This first picture would be a great “caption this” shot! Hoping to get these two tractors ready for the 4th of July parade... The Super C needed some Hydro linkage cleaning and adjustment and a good waxing. I honestly wish it looked this good in person but at least it photographs well Caleb’s hubs are a little worn and the keys are shot. Trying to at least get it functional for Wednesday. We will need to order new axle seals and probably get a set of hubs. However, Caleb will post pics in his thread and gather opinions there...I love working with this guy! 5 5 Share this post Link to post Share on other sites
ebinmaine 67,588 #858 Posted July 3, 2018 2 hours ago, PeacemakerJack said: This first picture would be a great “caption this” Ahh you tawkin tuh Mee??? 2 Share this post Link to post Share on other sites
Dadlife520H 195 #859 Posted July 3, 2018 Added a Suburban 400 a few days ago. 4 4 Share this post Link to post Share on other sites
oneroadkingman 53 #860 Posted July 3, 2018 Well I ordered some axle seals some hydraulic oil and filter and filters getting ready for that project next 3 Share this post Link to post Share on other sites
pfrederi 17,741 #861 Posted July 3, 2018 Front end of my new Charger 12 was loosey goosey. Made a new axle pivot pin added some shims to it and teh steering shaft. Tie rods had bee welded in the past and were ready to fall off, so I made up some new adjustable ones. 3 8 Share this post Link to post Share on other sites
BHunter 1,700 #862 Posted July 3, 2018 1 hour ago, pfrederi said: Front end of my new Charger 12 was loosey goosey. Made a new axle pivot pin added some shims to it and teh steering shaft. Tie rods had bee welded in the past and were ready to fall off, so I made up some new adjustable ones. They look great. Where did you find the tubes? Share this post Link to post Share on other sites
pfrederi 17,741 #863 Posted July 3, 2018 6" long 1/4" iron pipe nipples. You have to run a 3/8" drill through the to clean them out and get right size for the 3/8 all thread. (1/4 Inch pipe is actually .364 inches ID) 2 2 Share this post Link to post Share on other sites
Shynon 7,459 #864 Posted July 4, 2018 1054 is back on the table. Started pulling one of the hubs till my puller bolts broke. Found my drive pulley had been welded, got a new one coming. 1 3 Share this post Link to post Share on other sites
PeacemakerJack 10,738 #865 Posted July 4, 2018 Tom...Is this a possible plow rig in the making? 2 Share this post Link to post Share on other sites
Shynon 7,459 #866 Posted July 4, 2018 3 minutes ago, PeacemakerJack said: Tom...Is this a possible plow rig in the making? Gonna set it up to plow, gonna put an 8 pinion differential in it with the old plow tractor motor 12hp. Hope to have it ready by fall. 1 6 Share this post Link to post Share on other sites
19richie66 17,508 #867 Posted July 4, 2018 That will be a nice one. 1 1 Share this post Link to post Share on other sites
rjg854 11,378 #868 Posted July 4, 2018 I'm gonna change this just a wee bit and call this entry what will I do with my Wheel Horse today. I've got some Commando parts that 953 gave me after he took the transmission. So I'm gonna cannibalize what's left and change some of what's no great on one of mine for what's in better shape on the other, Then clean up what's left and stow parts away for safe keeping. ya jut never know when you need a part, or maybe have some things for someone else. 1 1 Share this post Link to post Share on other sites
ebinmaine 67,588 #869 Posted July 4, 2018 Got out the B80 Patriot Horse for the first time since 6/9 or 6/10 and towed the utility trailer down to the backyard for the trailer to be re-decked. 1 Share this post Link to post Share on other sites
squonk 41,149 #870 Posted July 4, 2018 Added a little bling to "HHHOOOWWWAAARRRDDD" my Steam Pageant show cruiser.. 5 2 Share this post Link to post Share on other sites
Sparky-(Admin) 21,326 #871 Posted July 4, 2018 Woke up kinda motivated....so out came the 8 speed in my C-165 that was leaking from everywhere! It’s was a hot one in the garage, about 94 degrees, but in went a nice dry tight 8 speed. Took it for a spin around the yard and all seems good 7 Share this post Link to post Share on other sites
Aldon 4,826 #872 Posted July 4, 2018 Almost too hot to work in the garage. Mid 90’s. But like @Sparky, I managed a few hours with the granddaughters working at repairing the hack job frame repair some prior owner did to the 551 I picked up at the show. Managed to get the welds removed. Will work in an appropriate repair while we wait on axle seals to arrive. 6 1 Share this post Link to post Share on other sites
Shynon 7,459 #873 Posted July 4, 2018 Got the hubs off without breaking them. 5 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,046 #874 Posted July 4, 2018 32 minutes ago, Aldon said: Almost too hot to work in the garage. Mid 90’s. But like @Sparky, I managed a few hours with the granddaughters working at repairing the hack job frame repair some prior owner did to the 551 I picked up at the show. Managed to get the welds removed. Will work in an appropriate repair while we wait on axle seals to arrive. Any chance of getting some measurements from you? I have a 551 here that is missing the complete rear plate so have nothing to go by. PO gave up on the project after removing what was left of it. Transmission hole spacing not a problem but don't know how far above the frame they are. Are they centered on the frame width? Is the plate even with the bottom of the frame? Also how far above the frame is the center of the clutch shaft? How far from the plate to the center of the shaft? Garry Share this post Link to post Share on other sites
ztnoo 2,298 #875 Posted July 4, 2018 10 minutes ago, Shynon said: Got the hubs off without breaking them. Given my experience with GT 14 hubs (removing them without breaking them, that is) a big July 4th Congratulations! I'm celebrating with you with a little super high proof rum, right now!!! 151 Proof, to be exact. Some of my local friends call it "Jet Fuel". Since you are on a run......might as well try a few more hubs! It's hot today, so cast iron is about as expanded naturally as is likely to be without a torch...... 1 2 Share this post Link to post Share on other sites
