AMC RULES 37,130 #601 Posted May 5, 2018 What? No bagels? Share this post Link to post Share on other sites
953 nut 55,290 #602 Posted May 5, 2018 6 hours ago, 19richie66 said: will be going to the the show tractorless No the bright side, that will give you plenty of room to bring home more ! 1 1 Share this post Link to post Share on other sites
19richie66 17,508 #603 Posted May 5, 2018 Only if it will fit in a Ford F-150 bed. 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #604 Posted May 5, 2018 Just removed the 400's plow... and went for a backyard burn. 5 Share this post Link to post Share on other sites
Tractor boy 239 #605 Posted May 5, 2018 Cleaned off my wheel weights and started cutting the worn down bolts in the plow. Share this post Link to post Share on other sites
squonk 41,144 #606 Posted May 5, 2018 Mowed the yard today with the 16 HORSE THUMPER!!!!!!!! 8 Share this post Link to post Share on other sites
Aldon 4,826 #607 Posted May 5, 2018 4 minutes ago, squonk said: Mowed the yard today with the 16 HORSE THUMPER!!!!!!!! I did as well. I really like the c160 for mowing. 5 Share this post Link to post Share on other sites
Lane Ranger 10,968 #608 Posted May 5, 2018 (edited) Rebuilt a Wheel Horse seat my sister helped save w ith new black upholstry vinyl, repainted a bunch of RJ and Suburban Wheel Horse clutch parts, wanted to get my RJ transmssion on the RJ frame today but found a problem with the brake shaft not tur ning and had to contact Stevesaurus for some advice. I was gettting ready to put the new oil seals in the brake and drive sfates (the big oiil seals) and then fill with fluid. But I did a check on axles, drive sfat and brake first. Good thin I did. Steve says I need to take a look at teh way the muchroom gear at teh bottom of the brake sfat goes into the bearing and how high the bearing sits in the bearing race. It is bound up tight and needs to move freely . Will get to that tomorrow! I have anoterh RJ transmssion that is unpainted but operates well. However, I have not taken a look inside it yet. Two other ones I have need major work and may not have 100% surviial ! Edited May 5, 2018 by Lane Ranger 11 Share this post Link to post Share on other sites
AMC RULES 37,130 #609 Posted May 5, 2018 This one from my Mrs Rules camera... 7 1 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,330 #610 Posted May 6, 2018 Craig- You need to get that back door installed on it. Looks really good. 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #611 Posted May 6, 2018 Actually, was trying to remember... where I put that today. 1 Share this post Link to post Share on other sites
CountryRock 199 #612 Posted May 6, 2018 Attempted to get all four tires changed on my 246h. Succeeded with the rear tires. The 8 inch front tires, I can not get them on the rim. Looking like I'll be going to a shop to get those mounted, unless anyone has some tricks for doing it. I have tire lube and bars. Share this post Link to post Share on other sites
953 nut 55,290 #613 Posted May 6, 2018 8 hours ago, CountryRock said: Attempted to get all four tires changed on my 246h. Succeeded with the rear tires. The 8 inch front tires, I can not get them on the rim. Looking like I'll be going to a shop to get those mounted, unless anyone has some tricks for doing it. I have tire lube and bars. If you clamp a Vice-grip to the lip of the rim it will keep the tire from sliding. 1 1 Share this post Link to post Share on other sites
TonyToro 1,049 #614 Posted May 6, 2018 Made it to the first pull of the season with the GT-1100. Grandpa ended up placing second. Thanks for all the help guys! 3 5 Share this post Link to post Share on other sites
19richie66 17,508 #615 Posted May 6, 2018 Thats awesome Tony! 1 1 Share this post Link to post Share on other sites
CountryRock 199 #616 Posted May 6, 2018 3 hours ago, 953 nut said: If you clamp a Vice-grip to the lip of the rim it will keep the tire from sliding. I couldn't even get the first bead on the rim at all. 1 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #617 Posted May 6, 2018 Helps the mounting process, to get some heat into the rubber before you start. Easily accomplished by leaving them out on the hot asphalt for a few hours, mid summer. Make sure you flip 'em a few times to evenly distribute the Sun's heat. Sounds crazy, but you'd be surprised how much easier the hand mounting process goes. 3 3 Share this post Link to post Share on other sites
CountryRock 199 #618 Posted May 6, 2018 Ended up going to the local Walmart tire shop to get em mounted today. Got them installed on the tractor, along with the new Xtreme mower clutch. Greased it all up, put the deck on and ran it around the yard a bit. All ready for mowing season. 3 3 Share this post Link to post Share on other sites
Aldon 4,826 #619 Posted May 6, 2018 Decided to blow the dust and grass clippings off my K341 thumper. I like this beast almost as much as my GT14’s. 4 6 Share this post Link to post Share on other sites
19richie66 17,508 #620 Posted May 6, 2018 (edited) Took Skittles down to the bare bones. Put the frame on the rotisserie and got it all stripped, wire wheeled and primed today. Also fixed the crappy weld job on the front. Someone popcorn welded a thick piece of steel on the front to the real thin factory piece. Scuff it and paint it tomorrow and let it bake a couple days. Front axle and side panels are next. Edited May 6, 2018 by 19richie66 Forgot the pictures and you know if there are no photos, it didn’t happen. 7 2 Share this post Link to post Share on other sites
wheel horse man 56 #621 Posted May 7, 2018 Need help just bought a 1075 today its missing a belt guard but some where at my moms i have a charger 14 auto belt guard will it fit ir work with the 1057 4 Share this post Link to post Share on other sites
Aldon 4,826 #622 Posted May 7, 2018 Bunch of chores today but enddd by moving firewood and some dirt with Thumper. 9 Share this post Link to post Share on other sites
AMC RULES 37,130 #623 Posted May 7, 2018 Woke the 551 up today... from it's deep winter slumber. 5 8 Share this post Link to post Share on other sites
dclarke 4,032 #624 Posted May 8, 2018 Summer duty for my snow machine. 6 9 Share this post Link to post Share on other sites
PeacemakerJack 10,738 #625 Posted May 8, 2018 I like those “passengers” in the tub! Memories they won’t soon forget. 3 Share this post Link to post Share on other sites
