What have you done to your Wheel Horse today?

[pfrederi 17,729]

58 minutes ago, adsm08 said:

 

 

Where I am its low 40s. It's coming down as snow, but not laying. There is one of those atmospheric river things heading south to the west of Ontario, but hitting a lot of New England down into PA.

 

Also, if @pfrederiis in Northeast the town, and not Northeast the region he's right on lake Erie, and they are getting lake effect with system. My aunt who lives in Erie had a few inches on the ground last night.

 

\

In NEPA about 25 miles North of Scranton

[pfrederi 17,729]

1 hour ago, Ed Kennell said:

How is the front end control with that big blade angled?

 

 

Not too bad. I did throw a front wheel chain early on went on with out it.  it will push you when it get up above the blade and is like to day heavy wet stuff. After it pushed yo off course swing atound an push the stuff straight off.  I do have weights on the front and the blade is pretty heavy.  over all I really like it.. Yu do not reangel unless the blade is up and even then it more than finger top pressure...and yes I greased the heck out of the picot area

Edited 18 hours ago by pfrederi

[adsm08 2,047]

36 minutes ago, pfrederi said:

 

\

In NEPA about 25 miles North of Scranton

 

Ok.

 

I know we have a member who is from Northeast the town near Erie, I just can't remember who it is.

 

I was supposed to stop and look at an issue with him on one of my trips up there, but he figured it out before my trip.

[Ed Kennell 38,143]

1 hour ago, adsm08 said:

 

 

I know we have a member who is from Northeast the town near Erie, I just can't remember who it is.

 

 

That would be Cory.  @Cee245

[MainelyWheelhorse 433]

Today, on Wheel Horse corner… I painted the battery hold down and installed it in the 308. I mentioned in a text to @ebinmaine “it’s getting too nice for a bungee cord.”  I’m about 2 hours from @ebinmaine and it’s high forties and fifties with rain off and on all day. When the white stuff comes, I've been practicing by pushing back my brother's horse manure pile with the 308.
 

 

Edited 15 hours ago by MainelyWheelhorse

[Lee1977 6,656]

That's the kind of snow we always get, take a snow ball and you can squeeze a quart of water out of it. 

 

 

 

 

 

 

 

 

Edited 14 hours ago by Lee1977

[Bar Nuthin 208]

1 hour ago, MainelyWheelhorse said:

Today, on Wheel Horse corner… I painted the battery hold down and installed it in the 308. I mentioned in a text to @ebinmaine “it’s getting too nice for a bungee cord.”  

 This made me LOL - I painted a battery tray and looked at my tractor thinking - "It's not ready for a nice battery tray. The bungee cord will suffice for now".

[Bar Nuthin 208]

Wanted score these seat pads while they were available. You never know when sources dry up.  Had to try them on for size before packaging them back up and storing them for future use.

[ebinmaine 67,432]

Just now, Bar Nuthin said:

Wanted score these seat pads while they were available. You never know when sources dry up.  Had to try them on for size before packaging them back up and storing them for future use.

 

 

Sourced on FB?

[oliver2-44 9,739]

There's a tire recycler business about 12 miles from me. 

They pull and stack "possible good tires" as they unload the the trucks.

They also let you walk the outside of the huge 2-4 acre pile they are constantly working adding to and removing to grind.

I visit one or twice each winter.  to many crawly critters in those tires during the summer.

I bring a chopping hoe with me to reach a little further to pull tires off the pile.  It also keeps my hand out of unknown things inside tires.

I was looking for 2- 23 x8.5-12 turf tires. didn't find them, but found 2 NOS tires. and one very lightly used one that still had some nubbies left. 

Prices have gone up, now $8 ffor the 2 smaller one and $12 for the larger one.

I'm amazed that almost every visit I come home with at least one NOS tire.   

I guess businesses just change inventory and toss them (at the state mandated $5 recycling charge per tire)

[Bar Nuthin 208]

2 minutes ago, ebinmaine said:

 

Sourced on FB?

Tracked down Matt on FB and contacted through Messenger

[BBQVultureWings 98]

4 hours ago, ebinmaine said:

 

Sourced on FB?

Where art thou making such a Cool Score???? Do tell .....as I could use a couple of those

<sigh> 

[BBQVultureWings 98]

 Look what followed Moo-Wah home tonight. I traded a Jetski I can't ride anymore for this Special Aniversary Edition with 2 mowing decks ( 1 side & 1 Rear discharge ) & a Snow Bade. I wonder which club this 1 puts Moo-Wah in ....... Any who lots & lots to do now....Then tomorrow is wheel horse day all day. ( I know I said that before but the contractor we hired showed up the day I was supposed to be working on Ol' Cyclops So Wheel Horse stuff got pushed back a few days.. . & Now I really need the blade as I have 46 ft of new driveway.... The guys were really great to work with as I had a few conduits I wanted to put under the slab for future use they even dug the trenches... It has been a busy week.  off to bed....

[Treepep 564]

17 hours ago, pfrederi said:

Been snowing all night plowed about 6:30 but has added more... lost half a tree up against the house.  Been using the Charger 16 with the big plow (56in) from a D series..This heavy wet stuff is about all she can deal with actually drags the engine down before I spin out.  Sorry no actionvpics my photographer avoid the out side when it snows   Power off since 3:15 am

Nope,  No thank you!  Certainly pretty wonderful with a well fed horse.  Enjoy Sir

[ebinmaine 67,432]

3 hours ago, BBQVultureWings said:

Where art thou making such a Cool Score???? Do tell .....as I could use a couple of those

<sigh> 

 

 

I don't do the books/ faces thing. 

 

I believe the maker has a username here but is rarely on. 

 

@Retired Wrencher. Gary might know how to contact.  

[Retired Wrencher 5,451]

34 minutes ago, ebinmaine said:

 

 

I don't do the books/ faces thing. 

 

I believe the maker has a username here but is rarely on. 

 

@Retired Wrencher. Gary might know how to contact.  

His full name is Matt Castagno. He is on F.B. I sent him a message about his phone number to post here.

Edited 4 hours ago by Retired Wrencher

[Sparky-(Admin) 21,315]

52 minutes ago, ebinmaine said:

 

 

I don't do the books/ faces thing. 

 

I believe the maker has a username here but is rarely on. 

 

@Retired Wrencher. Gary might know how to contact.  

He is @grnlark  here on Red Square 

 

[grnlark 483]

Hey there guys,

I'm not on here as much as I used to be. If anyone is interested in more info on our seats, feel free to email me at grnlark@gmail.com. I'd prefer not to post my phone number here, but happy to transition to text once emailed. 

Thanks,

Matt 👍

[Bar Nuthin 208]

@BBQVultureWings - Matt is a great guy to deal with once you get hold of him.

51 minutes ago, grnlark said:

Hey there guys,

I'm not on here as much as I used to be. If anyone is interested in more info on our seats, feel free to email me at grnlark@gmail.com. I'd prefer not to post my phone number here, but happy to transition to text once emailed. 

Thanks,

Matt 👍