Monstrosity 1,127 #22226 Posted November 2 (edited) FINALLY added wiring for trailer lights so mounting electric quick compressor with small tank for tire filling and air horn shenanigans. Used my long frame plow and adapted the thatcher. My yard has hard edges that I can't use the pull behind it was designed for so put it on the front Edited November 2 by Monstrosity 6 6 Share this post Link to post Share on other sites
ebinmaine 67,379 #22227 Posted November 2 4 minutes ago, Bar Nuthin said: They mounted up nicely, but when I turned them on, they were noticeably yellow compared to the LEDs. So, I found some LED replacement bulbs and, VIOLA! Quite possible they'll be too bright if it's snowing! Niiiiice. They won't be too bright. You'll appreciate the nice bright white light even in the snow. 2 Share this post Link to post Share on other sites
Monstrosity 1,127 #22228 Posted November 2 Some Halloween antics 7 6 Share this post Link to post Share on other sites
SylvanLakeWH 25,521 #22229 Posted November 2 Returned the C-105 to towing duties after sending the two E-141's down the road with the rest of the SL&WHN RR... kids don't mind... 5 3 4 Share this post Link to post Share on other sites
DevonianHorse 271 #22230 Posted November 2 Sorry for the messy garage! But I have now owned my 1977 Wheelhorse C-100 for 20 years! I got it when I was 13 years old for £300. I still remember clearly how excited I was, I live in the UK but I have always loved old American cars and 1960s and 1970s stuff, so when I got this it was the coolest thing ever. I have a ton of memories of driving it around, with a trailer on the back and my friends would take turns driving each other down to our shed/club house in the woods. It has been repainted but I always keep it rubbed down with an oily rag because I live on Dartmoor and it is super humid and wet here, especially in winter. Cheers all 7 14 Share this post Link to post Share on other sites
EB-80/8inPA 1,640 #22231 Posted November 2 With all the parts I thought I would need in hand, I pulled the C-160’s fuel pump, slapped on a gasket and cover plate and proceeded to wire and plumb a Carbole electrificated do-me-good gas pump. While I did succeed in getting it to run briefly, this plan did not quite go according to plan. Ugh. While I was hoping to change the oil and get on with getting her ready for Winter, that didn’t happen. More on that later, perhaps with some details and pics so some of you fine folks can tell me where I fu@$&ed up. 4 Share this post Link to post Share on other sites
D_Mac 8,593 #22232 Posted November 2 Changed the oil on my 875. Also greased and oiled the moving parts. It's ready to go to work. Of course I don't mind if I don't have to use it any time soon. 9 3 1 Share this post Link to post Share on other sites
TonyToro Jr. 1,411 #22233 Posted November 3 22 hours ago, Bar Nuthin said: It's usually dark by the time I get a chance to clear my driveway, so I decided to upgrade my lights. I started with replacing the stock 1156 bulbs with some bright LEDs. Big improvement. I like those lights and need to get some for my c-121. Any link for what they are? 1 Share this post Link to post Share on other sites
Bar Nuthin 189 #22234 Posted November 3 (edited) 2 hours ago, TonyToro Jr. said: I like those lights and need to get some for my c-121. Any link for what they are? Here is the link for the 1156 replacements https://a.co/d/7btuNy8 Here is the link for the PAR36 bulbs that fit into my vintage 4.5" tractor lamp housings https://a.co/d/hRwg1Xz Untitled video - Made with Clipchamp (3).mp4 Edited November 3 by Bar Nuthin 4 2 1 Share this post Link to post Share on other sites
dmoore 774 #22235 Posted November 3 Look what I just bought 7 14 Share this post Link to post Share on other sites
dmoore 774 #22236 Posted November 3 And it runs 3 2 Share this post Link to post Share on other sites
Racinbob 11,048 #22237 Posted November 3 15 minutes ago, dmoore said: Look what I just bought WOW!! That's as nice as they come! 1 Share this post Link to post Share on other sites
dmoore 774 #22238 Posted November 3 (edited) It's amazing Bob, he removed the recoil starter due to the "paws" being worn. I'll look into that. Everything looks to be there including original Silverton tires, guards etc. I've been looking for quite some time! It appears to be a 59 but I will let the RJ gurus chime in. Their still out there! Edited November 3 by dmoore 3 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,521 #22240 Posted November 3 @dmoore 1 Share this post Link to post Share on other sites
EB-80/8inPA 1,640 #22241 Posted November 3 I futzed around some with the C-160’s new electric fuel supply, minimized the amount of 1/4” line, used a different filter, and finally got it to fire off with the help of some carb cleaner. Won’t keep running though. I think the carb doesn’t like the new flow rate or something. But at least I know the pump works fine. But it seems I can’t solve one problem on this thing without creating another! So, I’m guessing the carb needs some TLC. Or??? 3 Share this post Link to post Share on other sites
ebinmaine 67,379 #22242 Posted November 3 1 hour ago, EB-80/8inPA said: I futzed around some with the C-160’s new electric fuel supply, minimized the amount of 1/4” line, used a different filter, and finally got it to fire off with the help of some carb cleaner. Won’t keep running though. I think the carb doesn’t like the new flow rate or something. But at least I know the pump works fine. But it seems I can’t solve one problem on this thing without creating another! So, I’m guessing the carb needs some TLC. Or??? Do you use ethanol fuel? When was the carb last rebuilt? 2 Share this post Link to post Share on other sites
EB-80/8inPA 1,640 #22243 Posted November 3 17 minutes ago, ebinmaine said: Do you use ethanol fuel? When was the carb last rebuilt? No ethanol. Ever. And so far, I’ve never had to rebuild it, either. Until today! 2 Share this post Link to post Share on other sites
2drxploder 103 #22244 Posted November 3 repairing the little trailer. went further than i thought. no welding gas, so i just kept adding and grinding, cutting.... 8 5 Share this post Link to post Share on other sites
kpinnc 11,967 #22245 Posted November 4 10 hours ago, Racinbob said: WOW!! That's as nice as they come! Share this post Link to post Share on other sites
kpinnc 11,967 #22246 Posted November 4 4 hours ago, 2drxploder said: repairing the little trailer. went further than i thought. no welding gas, so i just kept adding and grinding, cutting.... Looks like a solid repair from here. 1 Share this post Link to post Share on other sites
johnnymag3 2,517 #22247 Posted November 4 Never too BRIGHT Nice work 1 Share this post Link to post Share on other sites
BBQVultureWings 90 #22248 Posted November 5 (edited) So, I was all set to change fuel lines & clean my tank & clean the Carburator & See if Ol' Cyclops ( my new to Moo-Wah 1980 C-145) would talk to Moo-Wah at all.... & in the process of removin the fuel line fom between the carb & the fuel pump, I had a total DumbAzz Attack & broke the top of the fuel outlet on the fuel pump.... UGH!!!! I could just about chew on some #16 nails about now.... So Now I gotta get a Fuel pump.... Has anyone else done this here blunder? Are the kits on scAmazon any good? A-Z Tractor is not showing any fuel pumps for my engine... I consulted the Manual & according to what I am seeing for my Kohler Model; K321AS Spec; 60362d Serial; 9772075 After serial 7xxxxxx use Fuel pump 4755901<----- WRONG!! EDIT: Ok, so in my fury of trying to solve this problem, I was looking at the wrong Part & I removed the old pump to get the part number from that. So Now I thiMk I have the correct number however most of the various part numbers, the pumps look nearly the same.... & they all come with a Snap ring. Where does that go? I did not see a snap ring on my engine ... Anyway I am going to call A-Z Tractor in the morning. Anybody have suggestions on which after market 1 to get or do I spring for the $105 choice on fleabay? or does somebody here have 1 or know of of someone who mayhave it for a better price? On top of all that my crapsman tractor decides to drop the fuel solenoid today & I really do Not want to throw anymore time or money at that thing as I would much rather get my wheel Horses going.... Calling it a day as Tomorrow is another day.... enjoy the pictures..... Any input will be appreciated Edited November 6 by BBQVultureWings Wrong Part number for the fuel pump Need to correct that 1 1 Share this post Link to post Share on other sites
ebinmaine 67,379 #22249 Posted November 5 5 hours ago, BBQVultureWings said: A-Z Tractor is not showing any fuel pumps for my engine... Always CALL Lincoln. Always. He's as busy as one can get most of the year. He doesn't have time to keep his site updated to live inventory. I stopped using his website for the most part years ago. 2 1 1 Share this post Link to post Share on other sites
pfrederi 17,693 #22250 Posted November 5 11 hours ago, BBQVultureWings said: So, I was all set to change fuel lines & clean my tank & clean the Carburator & See if Ol' Cyclops ( my new to Moo-Wah 1980 C-145) would talk to Moo-Wah at all.... & in the process of removin the fuel line fom between the carb & the fuel pump, I had a total DumbAzz Attack & broke the top of the fuel outlet on the fuel pump.... UGH!!!! I could just about chew on some #16 nails about now.... So Now I gotta get a Fuel pump.... Has anyone else done this here blunder? Are the kits on scAmazon any good? A-Z Tractor is not showing any fuel pumps for my engine... I consulted the Manual & according to what I am seeing for my Kohler Model; K321AS Spec; 60362d Serial; 9772075 After serial 7xxxxxx use Fuel pump 4755901 Anybody have suggestions on which after market 1 to get or do I spring for the $105 choice on fleabay? or does somebody here have 1 or know of of someone who mayhave it for a better price? On top of all that my crapsman tractor decides to drop the fuel solenoid today & I really do Not want to throw anymore time or money at that thing as I would much rather get my wheel Horses going.... Calling it a day as Tomorrow is another day.... enjoy the pictures..... Any input will be appreciated Get an electric pump!! I use Facet posiflo. made in USA 4 2 1 Share this post Link to post Share on other sites
