sqrlgtr 552 #21551 Posted June 17 25 minutes ago, Goldnboy said: I asked my daughter who likes to paint if she would paint the white letters on my dash panel.. She surprised me with it on father's day! That looks great! I've been wanting to try my hand at it and was wondering how to go about doing it? Care to share how she went about doing yours? Thought about using small sponge but I don't know if that would work... 4 1 Share this post Link to post Share on other sites
johnnymag3 2,520 #21552 Posted June 17 No to the small sponge idea !!!! Been there....use a small brush, it comes out great !!! John 4 1 Share this post Link to post Share on other sites
Goldnboy 920 #21553 Posted June 17 1 hour ago, sqrlgtr said: That looks great! I've been wanting to try my hand at it and was wondering how to go about doing it? Care to share how she went about doing yours? Thought about using small sponge but I don't know if that would work... From what I seen it was a white enamel paint pen that said waterproof/sunproof that I think was purchased at Hobby Lobby. 2 1 Share this post Link to post Share on other sites
sqrlgtr 552 #21554 Posted June 17 6 minutes ago, Goldnboy said: From what I seen it was a white enamel paint pen that said waterproof/sunproof that I think was purchased at Hobby Lobby. thanks I'm going to go out on limb here and say she probably has a lot steadier hand than me lol... 2 Share this post Link to post Share on other sites
ebinmaine 67,498 #21555 Posted June 17 25 minutes ago, sqrlgtr said: thanks I'm going to go out on limb here and say she probably has a lot steadier hand than me lol... Here's how it would look if I tried it..... 16 Share this post Link to post Share on other sites
BHunter 1,700 #21556 Posted June 17 Today Mason and I adjusted the valves and put a new head gasket on. Only 3 days left before the Big Show. Hoping to make it run its best for lots of cruising. 6 7 Share this post Link to post Share on other sites
Wheelhorse#1 1,657 #21557 Posted June 18 Getting everything ready then we will be loading up on the trailer tomorrow morning, headed to the show 4 4 Share this post Link to post Share on other sites
drodg33 101 #21558 Posted June 19 I took my granddaughter on her first WheelHorse ride. She loved it. 1 5 10 Share this post Link to post Share on other sites
76c12091520h 3,620 #21559 Posted June 20 (edited) 8 hours ago, drodg33 said: I took my granddaughter on her first WheelHorse ride. She loved it. I truly admire both the rides in your picture....( your passenger is cute too ) ; my 67 : Edited June 20 by 76c12091520h 6 1 Share this post Link to post Share on other sites
drodg33 101 #21560 Posted June 20 Love that Coronet 500. Thanks everyone 1 Share this post Link to post Share on other sites
sqrlgtr 552 #21561 Posted June 20 swapped seat out on 857 thx rjg854 for the seat before and after pics 5 6 Share this post Link to post Share on other sites
rjg854 11,361 #21562 Posted June 21 Looks great, glad you're happy. 1 1 Share this post Link to post Share on other sites
ebinmaine 67,498 #21563 Posted June 23 Got another carb to clean out. I'm trying lacquer thinner on this one. The gaskets were glued on by a previous owner/ installer so I had to wire brush them off. I'll run it through the ultrasonic cleaner a few times and get it back together. 2 4 Share this post Link to post Share on other sites
Monstrosity 1,128 #21564 Posted June 23 Well I unloaded my haul from the big show and fixed the tire on the diesel. Max believes he needs another tire for the rear of his 1277 to really pull some weight at the sled pulls 5 1 Share this post Link to post Share on other sites
8ntruck 7,004 #21565 Posted June 24 (edited) More dirt work for Morgan the 14-8 today. Working the final grade under the deck. 'Tenderized' the work area with the Troy Built Bronco as a start, then got the shovel and landscape rake to tidy things up. Shoveled 4 or 5 cart loads of dirt - into AND out of the cart, as it is a non dumping low rider type cart. About 1/2 way done. Still have a yard and a half of dirt to move. A front end loader equipped Horse sure would be handy for this job. Found the gas leak in the tiller. The gas line was old and had cracks on the ID under the clamps allowing some seepage. Edited June 24 by 8ntruck 2 Share this post Link to post Share on other sites
Sodaking27 777 #21566 Posted June 24 Started the cleanup of the C175 I got from @PWL216. The dual coils are out of here. 6 2 Share this post Link to post Share on other sites
Brockport Bill 1,662 #21567 Posted June 24 2 hours ago, Sodaking27 said: Started the cleanup of the C175 I got from @PWL216. The dual coils are out of here. good luck with the C175 - i ahve two - -terrific model of WH -- as an fyi -- i assume you know the snorkle breather is in the "winter" position and rotates to a "summer" temps position -- 4 4 Share this post Link to post Share on other sites
87 416-8 horse 420 #21568 Posted June 24 (edited) I moved some big totes to turn into firewood storage later. Edited June 24 by 87 416-8 horse 7 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #21569 Posted June 24 Ripped the wiring out of my trailer and decided to fix it today but didn't want to drive my tow car down to the shop to just move around trailer, so I hooked up the tow ball to the front hitch of the 1257HEAVY and hauled it into my shop. This front hitch works slick! 9 3 Share this post Link to post Share on other sites
ebinmaine 67,498 #21570 Posted June 24 My Ole man @Qball. Mowing his front lawn. VID_20240624_093151.3gp 4 3 2 Share this post Link to post Share on other sites
kpinnc 12,049 #21571 Posted June 25 2 hours ago, OldWorkHorse said: This front hitch works slick! No clue who came up with the idea, but it is right up there with the guy who invented the cordless drill! 8 2 Share this post Link to post Share on other sites
Monstrosity 1,128 #21572 Posted June 28 Played around with the mount for the compressor head a bit tonight. The bracket is from a garden tractor lift that was tweaked and the hood is from @Pullstart! Giving life to a beat up hood! 4 5 Share this post Link to post Share on other sites
Pullstart 62,878 #21573 Posted June 28 8 hours ago, Monstrosity said: Played around with the mount for the compressor head a bit tonight. The bracket is from a garden tractor lift that was tweaked and the hood is from @Pullstart! Giving life to a beat up hood! A box of coffee for that hood was a perfect trade! Nice to see you and the fam, Jon! 1 1 Share this post Link to post Share on other sites
Sparky-(Admin) 21,318 #21574 Posted June 28 Not happy with the silver exhaust…high-temp black fixed that. And now it matches the headlight housing 2 11 Share this post Link to post Share on other sites
Tractorhead 9,064 #21575 Posted June 28 Looks much better ! 2 1 Share this post Link to post Share on other sites
