ebinmaine 67,424 #21026 Posted March 22 The BBT and her momma got a bit of firewood in. 6 4 Share this post Link to post Share on other sites
Handy Don 12,213 #21027 Posted March 23 16 hours ago, 87 416-8 horse said: I didn’t think about that. Thanks Eric Make sure to wipe a rag thoroughly around the inside of the tire before inserting the tube to check for any sharp objects that punctured the tire still being embedded. If left, it’d just puncture the tube and cause a new stream of verbal expletives! 4 Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #21028 Posted March 24 Brought home a real nice 48” plow a couple weekends back for cheap $$… brought it in and lubed up all the pivot and moving points. Ready for next season! 9 7 Share this post Link to post Share on other sites
squonk 41,068 #21029 Posted March 24 On 3/19/2024 at 10:24 PM, OutdoorEnvy said: They were warned in advance on their location selection. They want to learn the hard way so dad will let em. The hard way always sticks with you Yup! Back in the 60's one of my friends had a basket ball hoop on a tree at the edge of a hill. Halfway down the hill was a sewer discharge. If the ball went down the hill .....well you know! We had a rule. The last person who touched the ball had to retrieve and clean the ball " You did it, You get it!" 1 7 Share this post Link to post Share on other sites
Keaton 435 #21030 Posted March 24 not today but yesterday day I was working on my 32R lawn ranger, I got the head all cleaned up and am waiting for the head gasket, I got the flywheel and points off and got points and condincer ordered. now today I am going to take the carb apart and clean it good cause it had not ban rran in close to 20 years. I got the bowl off and it looks nasty. I need to get running and work on a tiller that I am working on for a guy. so that is what I have been doing and what I am doing I will put a picture of my lawn ranger 8 4 Share this post Link to post Share on other sites
ebinmaine 67,424 #21031 Posted March 25 Moved a bit of snow.... 5 5 Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #21032 Posted March 25 19 minutes ago, ebinmaine said: Moved a bit of snow.... Wasn’t happy with the rainy Saturday we had…but it sure beats another coating of snow! 3 Share this post Link to post Share on other sites
davem1111 2,030 #21033 Posted March 25 I'm feeling a bit jealous - we didn't have anything worth plowing here this winter. I had to do something so I pushed some gravel around before taking the plow blade off and putting the deck back on my GT-1848. Did a bit of mowing today... 2 Share this post Link to post Share on other sites
ebinmaine 67,424 #21034 Posted March 25 11 minutes ago, Sparky said: Wasn’t happy with the rainy Saturday we had…but it sure beats another coating of snow! Compared to a lot of Maine folk we did well. The seacoast area is blasted by massive power outages across several counties. Some won't have electricity until Wednesday afternoon. 30 miles north of us there are reports of 25", 26" deep snow in several places. 3 Share this post Link to post Share on other sites
cleat 5,926 #21035 Posted March 25 We got around an inch or so and most of it has melted. No plowing required (good thing since I put the plow tractor away for the summer). 3 1 Share this post Link to post Share on other sites
Tuneup 1,433 #21036 Posted March 26 Wow! Nothing here since Sunday night? The 520's rear cylinder wall is stained near the top of the stroke and a good honing has helped. Using one of the worn rings, I measured the bores and all seems OK. Thinking I'll get a set of fresh rings in the 'low cost' rebuild route. We'll see where that goes. The 516H liked it. This is supposed to be a 500 hour engine but the ring wear suggests otherwise. The 520 sits in the garage in the way so it'll get the attention it needs. Still have to decide if it's a refresh or a restore . . . 5 Share this post Link to post Share on other sites
Vaughan32850 86 #21037 Posted March 26 Fitted a new engine in my commando 7 race mower. 10 1 Share this post Link to post Share on other sites
Lee1977 6,656 #21038 Posted March 27 8 hours ago, Vaughan32850 said: Fitted a new engine in my commando 7 race mower. We need more pictures. 2 Share this post Link to post Share on other sites
Wheelhorse#1 1,657 #21039 Posted March 27 11 hours ago, Lee1977 said: We need more pictures. And possibly a vid of that bad boy in action ? Share this post Link to post Share on other sites
Vaughan32850 86 #21040 Posted March 27 42 minutes ago, Wheelhorse#1 said: And possibly a vid of that bad boy in action ? Sadly Redsquare will not allow me to post a video of it in action Share this post Link to post Share on other sites
ebinmaine 67,424 #21041 Posted March 27 1 minute ago, Vaughan32850 said: Sadly Redsquare will not allow me to post a video of it in action There's two answers to that. 1. Becoming a Supporter increases your capacity substantially. But that said... 2. Karl prefers we use links to YouTube because it doesn't take up Red Square memory space. 2 Share this post Link to post Share on other sites
rjg854 11,360 #21042 Posted March 27 2 minutes ago, Vaughan32850 said: Sadly Redsquare will not allow me to post a video of it in action If you were to become a supporter, then you be able to post all the pictures and videos you wanted to. I should have known I wouldn't beat EB with this post 4 Share this post Link to post Share on other sites
D_Mac 8,607 #21043 Posted March 27 So after work today I decided to shuffle the horses around in the garage. I wanted to move the snowblower and my 875 tractor with the plow to the back of the garage. So that ment I had to move them all. Even the bike. They all fired right up. Took each one for a zip around the yard and repositioned them. If only I had a bigger garage ! Not seen in the photo is the fake black hood that I keep outside. BTW.. I'm pretty sure @Pullstart stole my idea of hanging a Wheel Horse upside-down from the ceiling. I even took the bike for a cruise down the street. I think spring is here. Next project is to remove the sandbags from the back of my truck bed. 2 4 1 Share this post Link to post Share on other sites
87 416-8 horse 420 #21044 Posted March 27 56 minutes ago, D_Mac said: So after work today I decided to shuffle the horses around in the garage. I wanted to move the snowblower and my 875 tractor with the plow to the back of the garage. So that ment I had to move them all. Even the bike. They all fired right up. Took each one for a zip around the yard and repositioned them. If only I had a bigger garage ! Not seen in the photo is the fake black hood that I keep outside. BTW.. I'm pretty sure @Pullstart stole my idea of hanging a Wheel Horse upside-down from the ceiling. I even took the bike for a cruise down the street. I think spring is here. Next project is to remove the sandbags from the back of my truck bed. I like the paint job on the c- series and that’s a sweet bike! 1 1 Share this post Link to post Share on other sites
D_Mac 8,607 #21045 Posted March 27 That's a short hood 856, not a c series. 1 Share this post Link to post Share on other sites
squonk 41,068 #21046 Posted March 27 6 hours ago, rjg854 said: If you were to become a supporter, then you be able to post all the pictures and videos you wanted to. I should have known I wouldn't beat EB with this post Eric gets a high voltage shock (DC) whenever a new post appears on RS! 8 Share this post Link to post Share on other sites
ebinmaine 67,424 #21047 Posted March 27 1 hour ago, squonk said: Eric gets a high voltage shock (DC) whenever a new post appears on RS! @rjg854 I do get notifications for sure. I find it easier to get more information and sort what I don't want or need than take the time to scroll. That particular time I was actually holding my phone while waiting for a work question so I answered quick fast speedy. 1 1 Share this post Link to post Share on other sites
pfrederi 17,725 #21048 Posted March 28 Married up the frame and tranny on the C-160 renovation. Startling to get back together. 2 11 Share this post Link to post Share on other sites
WHGuy413 2,683 #21049 Posted March 29 I day dreamed about the puller build we are going to do. Need to get in the garage and reorganize some stuff. I bought a new tool box and have to wheel my old one out and bring the new bigger one in. Then time to tackle some stuff tractor related. 3 Share this post Link to post Share on other sites
TonyToro 1,049 #21050 Posted March 29 10 hours ago, WHGuy413 said: I day dreamed about the puller build we are going to do. Need to get in the garage and reorganize some stuff. I bought a new tool box and have to wheel my old one out and bring the new bigger one in. Then time to tackle some stuff tractor related. I heard puller! Will you pull transfer sled or stone boat? If you have questions …. Ask away. Share this post Link to post Share on other sites
