WHX?? 48,828 #17226 Posted September 29, 2022 (edited) Put a carb on today for a C...rebuilt by @Achto and goterrunnin... Edited September 29, 2022 by WHX?? 4 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #17227 Posted September 29, 2022 Got them all in there... finally... Don 5 Share this post Link to post Share on other sites
pfrederi 17,741 #17228 Posted September 29, 2022 On 9/27/2022 at 8:16 PM, ebinmaine said: I puttered around here and there in the yard today. Messed with the wheels and brakes on Cinnamon Horse C160. Took apart the top of a K341. @gwest_ca can you please tell me what year and usage this might be? Trina took her momma shopping and then commenced to her own puttering around here. Spec# was built for WH in 1974 for a 1975 C160... 1 Share this post Link to post Share on other sites
ebinmaine 67,567 #17229 Posted September 29, 2022 3 minutes ago, pfrederi said: Spec# was built for WH in 1974 for a 1975 C160... Well ain't that neat because that's exactly what it's going on... Share this post Link to post Share on other sites
OldWorkHorse 3,045 #17230 Posted September 29, 2022 Finished up the rear light pole and ran the wiring and my daughter helped go over the tractor and make sure everything was tight, she's really taking a liking to these wheel horses 4 8 Share this post Link to post Share on other sites
Wheelhorse#1 1,666 #17231 Posted September 29, 2022 22 hours ago, WHX?? said: Put a carb on today for a C...rebuilt by @Achto and goterrunnin... Interesting set up and carb. I dont believe Ive ever seen one of those before.Whats the model ? 1 Share this post Link to post Share on other sites
8ntruck 7,015 #17232 Posted September 30, 2022 Kind of looks like the updraft carb that is on my 8N. Share this post Link to post Share on other sites
HambyeDon 26 #17233 Posted September 30, 2022 Collected our little B111 today from a French barn. spent the day cleaning it and getting it running. 6 6 Share this post Link to post Share on other sites
WHX?? 48,828 #17234 Posted September 30, 2022 13 hours ago, Wheelhorse#1 said: Interesting set up and carb. I dont believe Ive ever seen one of those before.Whats the model ? C series. IH Farmall that is Threw that pic up just to see if I could get any bites... 2 Share this post Link to post Share on other sites
squonk 41,142 #17235 Posted September 30, 2022 I was rebuilding those carbs in HS. They were only 20 years old then. 2 Share this post Link to post Share on other sites
squonk 41,142 #17236 Posted September 30, 2022 Pin on the height adjustment came off my recycler deck whilst mowing today. Wondered why all of a sudden my lawn looked like astro turf. Thinking how can that pin come off. Then I saw a suspicious looking character wearing suspenders driving a Volvo pulling away! 1 3 Share this post Link to post Share on other sites
Wheelhorse#1 1,666 #17237 Posted September 30, 2022 8 hours ago, WHX?? said: C series. IH Farmall that is Threw that pic up just to see if I could get any bites... It worked 1 Share this post Link to post Share on other sites
Pullstart 62,905 #17238 Posted September 30, 2022 I started watching her at 5 months. Tractor tones have worked for nap time for over 3-1/2 years! I am not sure how much longer my arms will though! We drove about an hour and a half today. 2 2 1 6 Share this post Link to post Share on other sites
WHX?? 48,828 #17239 Posted September 30, 2022 1 hour ago, Wheelhorse#1 said: It worked I was gonna tell ya it was off the ultra rare C-184 ...I'd really been pulling yer stump tho... 3 Share this post Link to post Share on other sites
ebinmaine 67,567 #17240 Posted October 1, 2022 When towing something a bit on the heavy side the Cinnamon Horse C160 gets a little front end light going up our steepest couple hills. I've been meaning to add some weight for a few weeks. After swapping out the brake shoe last weekend I wanted to go out and get a trailer full of firewood 🪵🪓 I figured I'd see what I had laying around for usable ballast. This morning when I was looking for something else I remembered this was here... Fella I got it from a few years ago said a relative of his used it on a Kubota B series. It came with a couple other weights. One of them's on Trina's 867 Pigpen. This conglomeration is apparently a 6" diameter by 6" tall steel cylinder. The thinner two are pieces of lolly column. Seems to me the assembly weighs around 90, 95 lbs. Cool part is it sets right in the middle of the Mackissic chipper bracket. One bolt to hold it in place. 7 5 2 Share this post Link to post Share on other sites
Heatingman 971 #17241 Posted October 1, 2022 5 hours ago, ebinmaine said: When towing something a bit on the heavy side the Cinnamon Horse C160 gets a little front end light going up our steepest couple hills. I've been meaning to add some weight for a few weeks. After swapping out the brake shoe last weekend I wanted to go out and get a trailer full of firewood 🪵🪓 I figured I'd see what I had laying around for usable ballast. This morning when I was looking for something else I remembered this was here... Fella I got it from a few years ago said a relative of his used it on a Kubota B series. It came with a couple other weights. One of them's on Trina's 867 Pigpen. This conglomeration is apparently a 6" diameter by 6" tall steel cylinder. The thinner two are pieces of lolly column. Seems to me the assembly weighs around 90, 95 lbs. Cool part is it sets right in the middle of the Mackissic chipper bracket. One bolt to hold it in place. Did you hand paint that “wheelhorse” on the hood? And is there an advantage to having the front lug pattern reverse direction? 3 Share this post Link to post Share on other sites
ebinmaine 67,567 #17242 Posted October 1, 2022 42 minutes ago, Heatingman said: Did you hand paint that “wheelhorse” on the hood? And is there an advantage to having the front lug pattern reverse direction? The hood side letters are custom decals by our own @Vinylguy Terry. The script is a match to the mid 60s. The color is a custom choice to match the original build theme. Another Redsquare member and I were conversifying on the AG tires earlier too. AG tires have a much stronger bite when spun the correct direction. NON POWERED tires facing "backwards" will bite much better which increases steering capabilities. I've tried both directions with these tires on this tractor. It makes a HUGE difference the way they are. Absolutely recommend it. 3 Share this post Link to post Share on other sites
Andy N. 2,154 #17243 Posted October 2, 2022 On 9/24/2022 at 2:49 PM, OldWorkHorse said: On 9/24/2022 at 2:49 PM, OldWorkHorse said: I was fixing up my 42" plow and was very indecisive about all red, or black frame and red plow. Seeing what you did here made up my mind. Got a lot done on mine today. I will be trying out a polyurethane cutting edge sandwiched between the plow and the old cutting edge to help protect the newly poured driveway. 3 6 Share this post Link to post Share on other sites
Panther416-8 341 #17244 Posted October 2, 2022 Added another 25 lb weight to each front wheel for a totalof 100 lbs on the front axle and 320 lbs of cast weights on the rear axle. Should hopefully help with both the moldboard and snow plowing. Changed the headlights over to LEDs. 6 3 Share this post Link to post Share on other sites
richmondred01 2,237 #17245 Posted October 2, 2022 (edited) 600 hour 520. I’m not sure of the history so I’ll do a decarb and do valve job. I’ll use this winter for pushing snow and give my 160 the winter off. I’ll use it this winter and sell it in the spring. Edited October 2, 2022 by richmondred01 7 3 Share this post Link to post Share on other sites
HambyeDon 26 #17246 Posted October 2, 2022 Fitted a new solonoid and cleaned the ignition contacts. She now starts on the key. 10 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #17247 Posted October 2, 2022 6 hours ago, Andy N. said: I was fixing up my 42" plow and was very indecisive about all red, or black frame and red plow. Seeing what you did here made up my mind. Got a lot done on mine today. I will be trying out a polyurethane cutting edge sandwiched between the plow and the old cutting edge to help protect the newly poured driveway. I like red but not everything red, so I try to break it up here and there your plow looks great! If you need new decals check out redoyourhorse.com good price great product. 4 Share this post Link to post Share on other sites
ebinmaine 67,567 #17248 Posted October 2, 2022 8 hours ago, Panther416-8 said: Added another 25 lb weight to each front wheel for a totalof 100 lbs on the front axle and 320 lbs of cast weights on the rear axle. Should hopefully help with both the moldboard and snow plowing. Nice amount of weight! That'll certainly help. How well do you feel those front tires work for steering in snow n ice? Ever run front chains? Ever tried reversing the tread as discussed a few posts up? 2 1 Share this post Link to post Share on other sites
peter lena 8,634 #17249 Posted October 2, 2022 @ebinmaine stay after that front end greasing , with that extra load drag , sure you are aware , lucas green , pete 3 Share this post Link to post Share on other sites
peter lena 8,634 #17250 Posted October 2, 2022 @Panther416-8 what I said to ebin is also for you on that assurance of verified lubrication to extra heavy lubrication loading , lucas green grease on every related spot , jack up front end for assurance of flow , made for tough spots , pete 3 Share this post Link to post Share on other sites
