What have you done to your Wheel Horse today?

[squonk 41,104]

I have those gussets on my 953 as well Ed

 

[Ed Kennell 38,170]

2 hours ago, squonk said:

I have those gussets on my 953 as well Ed

 

So, they are factory.   How about this trunnion on the right front of the frame.   I'm  sure it's not factory, but I wonder what it was used for.

 

[squonk 41,104]

21 minutes ago, Ed Kennell said:

So, they are factory.   How about this trunnion on the right front of the frame.   I'm  sure it's not factory, but I wonder what it was used for.

 

Hole is there but no Trunnion. I think the mowing deck mount used that hole.

Edited September 20, 2022 by squonk

[WHX?? 48,815]

Added some bling bling to Alice just for S&Gs. VHT paint.

 

 

She also had a broken leg so a new seal & hub. Worse hub I  ever saw. I don't think I'm even going to try and broach it. Out to the magic parts shed for a replacement. Check out the original filter!

Edited September 20, 2022 by WHX??

[19richie66 17,505]

3 hours ago, Ed Kennell said:

I drained the diesel that has been soaking in the tranny for 2 weeks.    It didn't look too bad.   Probably flush again after I have it driving.

 

Are these spindle gussets factory Richard?  @953 nut

Those spindles look just like the ones I had on the 953 and momma’s 2054. I do believe they are factory. 

[WHX?? 48,815]

6 minutes ago, 19richie66 said:

 momma’s 2054. 

Stuffed a 20 HP in her did we Ritchie?

[Panther416-8 341]

Put a new carb on the 16 horse magnum and runs like a champ. Only thing is now the throttle lever keeps working it's way back down and I have to keep pushing it back up or hold it there when cutting grass. Had no issues before changing out the carb. Not sure what's causing this??

[19richie66 17,505]

1 hour ago, WHX?? said:

Stuffed a 20 HP in her did we Ritchie?

Yes sir 

[AMC RULES 37,130]

Making progress.

[19richie66 17,505]

17 minutes ago, AMC RULES said:

Making progress.

You doing a brown seat on her Craig? I see the diamond stitching. That would look good. Maybe I missed your plans for it. Definitely looks better now than what you started with. 

Edited September 20, 2022 by 19richie66

[oliver2-44 9,746]

7 minutes ago, 19richie66 said:

You doing a brown seat on her Craig? I see the diamond stitching. That would look good. Maybe I missed your plans for it. Definitely looks better now than what you started with. 

So I’ve seen bits and pieces of this excellent seat project, but inquiring minds want to know ……..what it’s going to be installed on 

[953 nut 55,222]

9 hours ago, Ed Kennell said:

Are these spindle gussets factory Richard?

Nothing like that on any of mine, perhaps a flanged bushing was inserted into the axle to tighten it up.

Edited September 20, 2022 by 953 nut
fat finger

[jefftheref 7]

Just pulled this tractor from my late father-in-law's barn and got it running and cleaned up. 1980-81 with an 8 horse Brigg's motor. In fantastic condition. 

Anyone have any idea of it's value?

Thanks 

[Pullstart 62,851]

@jefftheref  southerly neighbor!  That is more of a lawn tractor than the garden tractors we favor for the most part on this site.  That being said, it is much higher quality than any new crap sold of recent that is similar size.  As for value?  More in your garage put to use, than in your pocket for spending.  

[WHX?? 48,815]

  Jeff

Like Kev says couple of hundred tops ... better to mow your own lawn with. Better yet put a kid on it and send him out in the neighborhood for pocket money. Does look to be in nice shape. 

Edited September 21, 2022 by WHX??

[WHX?? 48,815]

OK ya'll know it don't take much to confuse me .. is this an RD or an SD?!?! Whoever did it did a nice job. Underside is immaculate and going on a C-121.

 

Alice got new eyeglasses today too.

Edited September 21, 2022 by WHX??

[OldWorkHorse 3,045]

Picked up a 48" plow from @ebinmaine over the weekend, solid unit other then some lower blade rust so i paired the rust and ordered some new decals from @Vinylguy like i do any of my projects big or small and got a part or 2 from wheelhorsepartsandmore. So woth some new paint decals and parts this plow will be as good as new. Somthing ive wanted for sometime now so looking forward to trying it out on my 314-8.

[Handy Don 12,217]

1 hour ago, WHX?? said:

OK ya'll know it don't take much to confuse me .. is this an RD or an SD?!?! Whoever did it did a nice job. Underside is immaculate and going on a C-121.

 

Very elegant way to make a 36 RD "go sideways"

[Pullstart 62,851]

Took a trail ride on Stormy with two nieces and a nephew.  The girls are from opposite sides of the family but seem to be best friends!

 

 

[WHX?? 48,815]

22 minutes ago, Handy Don said:

Very elegant way to make a 36 RD "go sideways"

Ok here is where is gets wild. Tag clearly shows it as a 95-36MS01 not a 36MR01 

Edited September 21, 2022 by WHX??

[ebinmaine 67,484]

1 hour ago, OldWorkHorse said:

Picked up a 48" plow from @ebinmaine over the weekend,

Thank you to @Sparky Mike for bringing that to @JCM Jim's!! 

[Brockport Bill 1,661]

1 hour ago, OldWorkHorse said:

Picked up a 48" plow from @ebinmaine over the weekend, solid unit other then some lower blade rust so i paired the rust and ordered some new decals from @Vinylguy like i do any of my projects big or small and got a part or 2 from wheelhorsepartsandmore. So woth some new paint decals and parts this plow will be as good as new. Somthing ive wanted for sometime now so looking forward to trying it out on my 314-8.

 

[Brockport Bill 1,661]

i have rehabbed a few plows in past yr - -and they clean up pretty easily --well wortht the time to clean rust then prime and paint

[Ed Kennell 38,170]

1 hour ago, WHX?? said:

Ok here is where is gets wild. Tag clearly shows it as a 95-36MS01 not a 36MR01 

 

 

 

I used to have two decks, a 36"sd and a 36" rd.          The sd rusted out, so I converted the rd to a sd and switched the ID tags.

[WHX?? 48,815]

So I inherited your deck Ed?  What are chances of it ending up here!

Thinking that's what someone did here.