What have you done to your Wheel Horse today?

[Monstrosity 1,128]

10 hours ago, Monstrosity said:

Lost spark in the 1277 over night... and the 1054 seams to have fallen apart 

Not to worry @The Freightliner Guy @TonyToro @TonyToro Jr. @953 nut @pfrederi its a good apart repower freashen up

[Heatingman 971]

Finalized the smothing of the deck belt cover, found and fixed some rot on the bottom of the deck, and finally got a coat of primer on the deck and related parts.

 

Hoping by mid week I’ll be able to top coat, and with even more good fortune be able to start reassembly next weekend.

 

 

Edited August 22, 2022 by Heatingman

[Heatingman 971]

[Panther416-8 341]

Thanks Heatingman, it appears to have had little use and as far as I can tell just missing a couple brackets that I can get from WH Parts and More for about $100 and need to make a chute rod out od 3/8" threaded rod. Since I only paid $225 for the blower I don't think that's too bad.

[Heatingman 971]

2 hours ago, Panther416-8 said:

Thanks Heatingman, it appears to have had little use and as far as I can tell just missing a couple brackets that I can get from WH Parts and More for about $100 and need to make a chute rod out od 3/8" threaded rod. Since I only paid $225 for the blower I don't think that's too bad.

Anytime

Edited August 22, 2022 by Heatingman
Figured it out

[Thompson1276 256]

Decals got put on a yesterday but now just finished had it sit in the sun with its fresh Pearl and until I saw it was starting to rain

[Panther416-8 341]

5 hours ago, Thompson1276 said:

Decals got put on a yesterday but now just finished had it sit in the sun with its fresh Pearl and until I saw it was starting to rain

Nice job Thompson, looks really sharp.

[Wheel Horse 3D 3,795]

Didn't do much other than plug in the battery maintainer...but loved having all the critters snoozing together in the shade

[Pullstart 62,851]

It’s been a while since Stormy the 1056 ran!  A charger on the battery and some fresh gas and he fired right up! Little Max’ and I tossed a 36” RD on and touched up some deer trails.  She was a great help!

 

 

[Bill Winn 156]

So... I got the new tiller mounted and running. The issue is that when I engage the PTO and drop it into the soil it stops turning but the old K-series Kohler keeps running strong. I adjusted the PTO lever a bit tighter and when that did not solve the issue I removed the clutch assembly. Lookie what I found. I have ordered the clutch disc but I am guessing I need a clutch plate/ pully?

 

Bill

[johnnymag3 2,520]

1 hour ago, Bill Winn said:

So... I got the new tiller mounted and running. The issue is that when I engage the PTO and drop it into the soil it stops turning but the old K-series Kohler keeps running strong. I adjusted the PTO lever a bit tighter and when that did not solve the issue I removed the clutch assembly. Lookie what I found. I have ordered the clutch disc but I am guessing I need a clutch plate/ pully?

 

Bill

Sent you a message..... John

 

[ineedanother 1,369]

It's Monday so work didn't allow for much other than allowing the e-tank to cook undisturbed, but while I was at the office "Rudy" (more to come about that later) got some mail...

 

[Pullstart 62,851]

666 pages of what we did to our Wheel Horses!  Oooooooooh!  

[ineedanother 1,369]

On 1/15/2018 at 10:28 AM, Ed Kennell said:

Ok, maybe this will get us back on topic.     Today  I made a safety light and pole for the 312 plow tractor .

 

And going strong after 4 1/2 years!!! Hey @Ed Kennell , the light still worth the effort? Thanks for the thread 

[Monstrosity 1,128]

Hey guys I know this is the wrong thread to post this but the c125 is going to be up for grabs or parts off it. Gave this thread first shot it'll be stripped more by the end of the week unless someone would like the roller. 

[ineedanother 1,369]

6 minutes ago, Monstrosity said:

Hey guys I know this is the wrong thread to post this but the c125 is going to be up for grabs or parts off it. Gave this thread first shot it'll be stripped more by the end of the week unless someone would like the roller. 

 

Hey man, looks like you put that  in the barn wet  

[Monstrosity 1,128]

Just now, ineedanother said:

 

Hey man, looks like you put that  in the barn wet  

I'm unsure of what this means lol if your referring to the left side hub it is loose as a goose and definitely wet 

[The Freightliner Guy 1,327]

On that specific model I think the rear of it is super ugly in my opinion but everything can’t always look how you like it I guess

[The Freightliner Guy 1,327]

I think toro could of made the rear look a little better but not a big deal it’s not a Pontiac Aztec at least 

[ineedanother 1,369]

1 minute ago, Monstrosity said:

I'm unsure of what this means lol if your referring to the left side hub it is loose as a goose and definitely wet 

Just my sense of humor which many don't get (including my wife most times ) It's just in the barn in no condition to work and it struck me as humorous. No ill intent here  I would actually love to have the pump and controls but I'm in NC so you guys up in the north get to reap the spoils when they go to pasture and I don't 

[Monstrosity 1,128]

6 minutes ago, ineedanother said:

Just my sense of humor which many don't get (including my wife most times ) It's just in the barn in no condition to work and it struck me as humorous. No ill intent here  I would actually love to have the pump and controls but I'm in NC so you guys up in the north get to reap the spoils when they go to pasture and I don't 

I'm actually traveling to Charlotte on September 17th ill be there for the weekend I wouldn't mind throwing it on the back of the burban if your interested

[Monstrosity 1,128]

10 minutes ago, The Freightliner Guy said:

I think toro could of made the rear look a little better but not a big deal it’s not a Pontiac Aztec at least 

Yeah the whole plastic fiberglass fender I didn't agree with plus I was looking for a standard gear instead of the hydro

[ineedanother 1,369]

15 minutes ago, Monstrosity said:

I'm actually traveling to Charlotte on September 17th ill be there for the weekend I wouldn't mind throwing it on the back of the burban if your interested

 

I'm in Durham, three hours or so from Charlotte but it's likely that you'll come in on I85 just north of me. Holler if you want to stop on your way through. The https://www.oldemeckbrew.com/ should be visited while you're in Charlotte if you're into German brews and food. Very casual and worth an evening and a good bourbon bar is right across the street. 

[Pullstart 62,851]

8 hours ago, The Freightliner Guy said:

On that specific model I think the rear of it is super ugly in my opinion but everything can’t always look how you like it I guess

 

8 hours ago, Monstrosity said:

Yeah the whole plastic fiberglass fender I didn't agree with plus I was looking for a standard gear instead of the hydro

@phil bowling and his buddy Scott pointed out to me that the lines of the hood and the fender do flow from the front.  Not that the rear does it any favors, but from the front they almost nailed it 

[Ed Kennell 38,170]

The P-up was a little too slow for show riding and driving to my tree stand.     So I replaced the 6" tranny pulley with a 3".

She's 2-3 times faster now.