953 nut 55,223 #16451 Posted August 4, 2022 1 hour ago, Pullstart said: Realized I’ve lost my MIND… 4 1 Share this post Link to post Share on other sites
Pullstart 62,851 #16452 Posted August 4, 2022 Just now, 953 nut said: 2 Share this post Link to post Share on other sites
squonk 41,104 #16453 Posted August 4, 2022 18 hours ago, Panther416-8 said: Put on a Bllack Talon seat from Northern Tool. Model 355000BK. Fairly easy install. First adjusted tracks on new seat so they were 7.5" apart CTC to match the original flip bracket. Used 5/16" coarse thread x 2" bolts with 1" space sleeves, 1/4" flat washers and the thinner type of hex nut. Slid the tracks off the new seat and installed the bolts through from the inside of the sliding tracks ( technically downward once seat is installed) and then added the sleeve, washer and nut on the other side of the track pieces. The tracks were slid back on the seat and then these "studs" that were created this way then went through the slots in the factory flip mount. I used the set of round holes on the tracks that were 8 inches CTC. Those are the best seats. I've had one over 20 years now. most comfortable seat. Just starting to crack Share this post Link to post Share on other sites
oliver2-44 9,747 #16454 Posted August 4, 2022 18 hours ago, Panther416-8 said: Put on a Bllack Talon seat from Northern Tool. Model 355000BK. Fairly easy install. First adjusted tracks on new seat so they were 7.5" apart CTC to match the original flip bracket. Used 5/16" coarse thread x 2" bolts with 1" space sleeves, 1/4" flat washers and the thinner type of hex nut. Slid the tracks off the new seat and installed the bolts through from the inside of the sliding tracks ( technically downward once seat is installed) and then added the sleeve, washer and nut on the other side of the track pieces. The tracks were slid back on the seat and then these "studs" that were created this way then went through the slots in the factory flip mount. I used the set of round holes on the tracks that were 8 inches CTC. @Panther416-8 Did you add the spacers to increase the seat height, or for another reason Share this post Link to post Share on other sites
Pullstart 62,851 #16455 Posted August 4, 2022 Pulled “Joe” out of the racks.. choosing to store immobile objects on the racking and mobile objects on the floor I forget how large those 27x10-12 Intercos are! 5 1 Share this post Link to post Share on other sites
19richie66 17,505 #16456 Posted August 4, 2022 All that clutter would frustrate me. Oh wait a minute 1 8 Share this post Link to post Share on other sites
ebinmaine 67,484 #16457 Posted August 4, 2022 7 minutes ago, 19richie66 said: Richie you still have a path down the middle so you're one up on some of us. Myself included. On occasion. 1 1 6 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #16458 Posted August 4, 2022 Well I have easy access to mine but it’s at my grandparents house 6 Share this post Link to post Share on other sites
D_Mac 8,618 #16459 Posted August 4, 2022 (edited) So I got the paint brushes out again. With some high temperature paint I detailed the muffler on the 856 Forsaken. After that I wanted to paint the shifter knob so it looks like a marble, and I detailed the steering wheel a bit. I know the tractors overall look isn't for everyone but I like it. Besides this tractor has a great story. Edited August 4, 2022 by D_Mac 2 5 2 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #16460 Posted August 4, 2022 I love it it looks great 1 Share this post Link to post Share on other sites
D_Mac 8,618 #16461 Posted August 4, 2022 Also nice to know that a good waxing pays off when it gets rained on. 4 1 Share this post Link to post Share on other sites
Panther416-8 341 #16462 Posted August 4, 2022 4 hours ago, oliver2-44 said: @Panther416-8 Did you add the spacers to increase the seat height, or for another reason Added spacers to make it equivalent to the spacers that were on the stock seat. At least I assume those were stock. Share this post Link to post Share on other sites
Panther416-8 341 #16463 Posted August 4, 2022 Replaced the seat lift support with a Strong Arm F4673. Works perfect with the new Black Talon seat. No more having to hold the seat back with the side of my arm while fueling. 1 1 Share this post Link to post Share on other sites
Wheelhorse#1 1,657 #16464 Posted August 4, 2022 I had a couple of leaking rear Ag tire.I buggered the bead slightly installing them. They would slowly leak,flat the next day. I decided to try a bead sealer . I have to say I’m pretty impressed.You don’t have to break down the tire all the way.Took about 35 min.to do two rear tires. 7 Share this post Link to post Share on other sites
Pullstart 62,851 #16465 Posted August 5, 2022 Found a couple tire chains today… Probably more around too! 5 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #16466 Posted August 5, 2022 Is that a allis chalmers I see back there Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #16467 Posted August 5, 2022 I can tell by just looking at the grill and front axle Share this post Link to post Share on other sites
ebinmaine 67,484 #16468 Posted August 5, 2022 13 minutes ago, Pullstart said: couple A couple?? THAT'S what we're goin with?? 1 1 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #16469 Posted August 5, 2022 Well knowing how much stuff pullstart has to him all those chains classifi as 5 1 Share this post Link to post Share on other sites
Pullstart 62,851 #16470 Posted August 5, 2022 3 minutes ago, ebinmaine said: A couple?? THAT'S what we're goin with?? well to be fair I didn’t count. But only one race car. 3 2 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #16471 Posted August 5, 2022 Oh yeah only one race car oh yeah A RACE CAR wow what else do you have in there Share this post Link to post Share on other sites
ebinmaine 67,484 #16472 Posted August 5, 2022 2 minutes ago, Pullstart said: . But only one race car...... ..... So far.... Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #16473 Posted August 5, 2022 He probably has a trophy truck back there Share this post Link to post Share on other sites
Pullstart 62,851 #16474 Posted August 5, 2022 (edited) 4 minutes ago, The Freightliner Guy said: He probably has a trophy truck back there nope just a 165 hp 1450 lb buggy… Edited August 5, 2022 by Pullstart 1 Share this post Link to post Share on other sites
The Freightliner Guy 1,327 #16475 Posted August 5, 2022 Do you got the 1950s bat mobile in there but wow just wow so much cool stuff 1 Share this post Link to post Share on other sites
