JCM 9,130 #14526 Posted February 2, 2022 We need to get you down to Southern Maine in September @Chestnut for the Meet & Greet. We need another 520 here besides mine, hope to see you. 2 1 Share this post Link to post Share on other sites
ebinmaine 67,251 #14527 Posted February 2, 2022 15 minutes ago, JCM said: We need to get you down to Southern Maine in September @Chestnut for the Meet & Greet. We need another 520 here besides mine, hope to see you. Absolutely agreed. 2 Share this post Link to post Share on other sites
ebinmaine 67,251 #14528 Posted February 2, 2022 30 minutes ago, Jeff-C175 said: If it moves, lube it. If it doesn't, paint it. This is fair. BBT approved as well. 2 1 4 Share this post Link to post Share on other sites
peter lena 8,580 #14529 Posted February 3, 2022 @Snoopy11 @kpinnc thanks for the kind words , how would i do that lubrication manual ? most of what I do is based on my millwright experience . dealing with failures and making them go away , developed a personal interest in mechanical operations . I just see a problem and immediately think of how to make make it stop . just some ideas , thanks pete 4 2 Share this post Link to post Share on other sites
Snoopy11 5,714 #14530 Posted February 3, 2022 2 minutes ago, peter lena said: @Snoopy11 @kpinnc thanks for the kind words , how would i do that lubrication manual ? most of what I do is based on my millwright experience . dealing with failures and making them go away , developed a personal interest in mechanical operations . I just see a problem and immediately think of how to make make it stop . just some ideas , thanks pete @ebinmaine... would you be willing to lend a hand? I am sure you would, that is something that you have done in the past... Don 3 1 Share this post Link to post Share on other sites
ebinmaine 67,251 #14531 Posted February 3, 2022 1 minute ago, Snoopy11 said: @ebinmaine... would you be willing to lend a hand? I am sure you would, that is something that you have done in the past... Don Absolutely 5 Share this post Link to post Share on other sites
Chestnut 315 #14532 Posted February 3, 2022 1 hour ago, JCM said: We need to get you down to Southern Maine in September @Chestnut for the Meet & Greet. We need another 520 here besides mine, hope to see you. I keep planning, then life seems to get in the way. I'll get there at some point. Hopefully, I'll even have a transport vehicle by then. The house renovation will be done at some point. In the meantime we've got a storm due Friday and PTO disc due Saturday. May just hunker down an extra day and clean up over the weekend. With luck the yard won't be covered by a block of blue ice. 5 Share this post Link to post Share on other sites
Southern_Secret 463 #14533 Posted February 3, 2022 5 hours ago, Snoopy11 said: @peter lena I am serious as a heart-attack... you need to create a lubrication manual for Redsquare. I, for one, would absolutely love for you to do that. Don 3 1 Share this post Link to post Share on other sites
Blackhood Bill 721 #14534 Posted February 3, 2022 13 hours ago, Jeff-C175 said: Mine did very well with the dump we got... One thing I noticed though was that I had to take it a bit slower than expected, but I believe it is because there is a WRONG and WIMPY spring on the idler! Augers kept stalling out when I pushed a little too hard. New spring on order... The correct spring is a 6651 part number and is 7/8" OD, 0.10 wire, hook to hook 5-3/4" If you can find a "Century Spring 5532" that's an exact match for the WH part. And this one is VERY close, Century C-263 https://www.amazon.com/dp/B000BQWVLY/ What's on yours Bill? @Jeff-C175 not sure will have to check, I just know from past snowfalls I have done about 7 driveways ranging from a few feet to a couple of hundred feet and no problems ate everything in its path and filled the tank up only once. 3 3 Share this post Link to post Share on other sites
kpinnc 11,894 #14535 Posted February 3, 2022 (edited) Had the Bronco out yesterday. Went inside for a minute and came back out to find it trying to pick a fight with my truck. Cocky little rascal... Edited February 3, 2022 by kpinnc 4 16 Share this post Link to post Share on other sites
Snoopy11 5,714 #14536 Posted February 3, 2022 4 hours ago, kpinnc said: Cocky little rascal... AND HANDSOME!!! Don 2 1 Share this post Link to post Share on other sites
Lane Ranger 10,943 #14537 Posted February 4, 2022 (edited) A little bit of snow removal with my 314 hydro and snowblower setup. My first time using a hydro with hydro lift and a snowblower! We had about five or six inches of fairly powdery snow from Storm Landon last night and today. This was on top of a lilt ice and sleet from Wednesday. Turned out pretty well. Did my drive and two neighbors before getting too cold. I can seethe need for wheel weights on this and I will put someon I am for more work in daylight tomorrow. This 314 has ag tread tires and they did well without chains. Onl stuck once tonight. IMG_1076.MOV IMG_1070.MOV 2DBE3B80-C895-4065-A87A-E7559C534E43.MOV Edited February 4, 2022 by Lane Ranger 7 3 Share this post Link to post Share on other sites
Horse Newbie 7,051 #14538 Posted February 4, 2022 11 hours ago, kpinnc said: Had the Bronco out yesterday. Went inside for a minute and came back out to find it trying to pick a fight with my truck. Cocky little rascal... That’s a nice tractor, no truck… nice truck, no tractor… nice tractor, no truck… 1 2 1 Share this post Link to post Share on other sites
peter lena 8,580 #14539 Posted February 4, 2022 @Lane Ranger looks good , like the bright lights ! noticed your naked chute control rod end , easy to install and great with gloves or mittens, pete 2 1 Share this post Link to post Share on other sites
Lane Ranger 10,943 #14540 Posted February 4, 2022 More work today! Photos from Greencastle, Indiana. The National Weather Service says we received 7.6 inches in the Landon Snowstorm. A8D3F412-3D7F-459B-AEF3-28A531D20E5D.MOV 3 8 Share this post Link to post Share on other sites
SylvanLakeWH 25,489 #14541 Posted February 4, 2022 Well looks like my 5 year old battery on my C 105 might be toast… Always on a floater and perfect performance until this morning… No complaints… Excellent performance… I’ll be swapping out the one I use for lights on the predator swap… no more lights on that one until I replace the 3 on the E 141 this spring… I’ll use one of those, add some needed weight and give me lights…! 6 Share this post Link to post Share on other sites
Snoopy11 5,714 #14542 Posted February 4, 2022 @kpinnc Out plowing (video on the way)... and HellHorse ran out of gas. Went back to the shop, grabbed a can of fuel, threw it in the trailer, and went out to give my Horse a drink. Then the 2 of them got in an argument about who was faster... deer or horse... Sheesh... can't they just get along? Don 1 7 Share this post Link to post Share on other sites
kpinnc 11,894 #14543 Posted February 5, 2022 2 hours ago, Snoopy11 said: Then the 2 of them got in an argument about who was faster... deer or horse... Hate it when they do that. Why can't these horses stop acting like ponies???? Bunch of babies! 4 Share this post Link to post Share on other sites
Lee1977 6,641 #14544 Posted February 5, 2022 5 hours ago, kpinnc said: Hate it when they do that. Why can't these horses stop acting like ponies???? Bunch of babies! That's there nature they don't like to be pasted by another horse. 1 1 Share this post Link to post Share on other sites
TJ5208 1,824 #14545 Posted February 5, 2022 Got my parts today just have to put them on. 3 1 Share this post Link to post Share on other sites
johnnymag3 2,515 #14546 Posted February 5, 2022 Had better luck this past season with the Champion......NGK is not the same anymore......both engines....KT17...and M18 2 Share this post Link to post Share on other sites
johnnymag3 2,515 #14547 Posted February 5, 2022 Champion was clean....mean...and oh so tan !!! regapped, and stuffed it back in!!! 2 Share this post Link to post Share on other sites
kpinnc 11,894 #14548 Posted February 5, 2022 (edited) Welded up some rebar and scrap flat bar to clamp on my cultivator bar. Made a nice little drag rake until I get the larger one built for the Bronco. I hate stutter bumps in my gravel driveway. This is at least a short term fix until spring. The 867 didn't mind dragging it around, even if it was just cobbled up. Edited February 5, 2022 by kpinnc 9 8 Share this post Link to post Share on other sites
ebinmaine 67,251 #14549 Posted February 5, 2022 5 minutes ago, kpinnc said: cobbled Looks great from here Sir. 1 Share this post Link to post Share on other sites
kpinnc 11,894 #14550 Posted February 5, 2022 4 minutes ago, ebinmaine said: Looks great from here Sir. Thanks! It was more of a test than anything. I wanted to see how much spacing and how much weight I would need to make it work. I think the larger one on the Bronco will work better, because it will basically be two rows of spikes, and far more weight to keep it digging. 3 Share this post Link to post Share on other sites
