Oldskool 6,644 #13651 Posted November 23, 2021 11 minutes ago, Maxwell-8 said: Do you guys keep them constantly plugged in? Is that not a fire hazard? I think my fire insurance states something about it... That's what I was wondering as well. Although I guess a battery could explode at any given time causing a hazard. 1 Share this post Link to post Share on other sites
Oldskool 6,644 #13652 Posted November 23, 2021 4 minutes ago, Maxwell-8 said: oooww Can't wait As soon as the current project is done I plan on putting the Y.E.T.I under the knife. Although I have this urge to build an articulated tractor, and just ended up with a Panzer that needs work.😆😆 2 1 Share this post Link to post Share on other sites
Oldskool 6,644 #13653 Posted November 23, 2021 20 hours ago, Maxwell-8 said: Oopps, she wont fit even with a 2" hood lift. That quite a power plant. There is some shoe horning to do. 1 1 Share this post Link to post Share on other sites
Maxwell-8 4,275 #13654 Posted November 23, 2021 9 minutes ago, Oldskool said: That's what I was wondering as well. Although I guess a battery could explode at any given time causing a hazard. the lockers at our local golfclub have accommodation for people to charge up their electric pushcart battery's. about the size of a U1 battery. One caught fire last season. all the golfclubs in the surrounding lockers were damaged by the heat. Of some drivers noting was left. I had a similair incident with one of those lithium battery jumpers. Now, I only keep chargers plugged in in the workshop when I am their. 2 Share this post Link to post Share on other sites
Maxwell-8 4,275 #13655 Posted November 23, 2021 8 minutes ago, Oldskool said: That quite a power plant. There is some shoe horning to do. I am estimating an additional 2" hood lift will be enhough if I relocate the fueltank. Making the hood 4" taller then stock. I am going to try it so it looks stock. 2 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #13656 Posted November 23, 2021 43 minutes ago, Maxwell-8 said: Do you guys keep them constantly plugged in? Is that not a fire hazard? I think my fire insurance states something about it... I keep my tractors on a Battery Tender year round while they are parked. I would recommend checking the electrolyte level once a month or two, as I’m pretty sure any charger constantly hooked up will tend to “dry out” the battery. Non maintenance batteries don’t seem to be an issue. As far as homeowners insurance, the ones I use ( Battery Tender brand ) is UL laboratory tested and rated, so I don’t see where it would be any more dangerous than a coffee pot… in fact I would bet coffee pots have burned more houses down than battery chargers. 3 1 Share this post Link to post Share on other sites
Sodaking27 777 #13657 Posted November 23, 2021 Replaced the seat pan with the correct one. Purchased a new seat and installed the seat springs correctly. Wiped a little dirt off. Starting to look a little better. Before After 6 8 Share this post Link to post Share on other sites
Maxwell-8 4,275 #13658 Posted November 23, 2021 1 minute ago, Horse Newbie said: I keep my tractors on a Battery Tender year round while they are parked. I would recommend checking the electrolyte level once a month or two, as I’m pretty sure any charger constantly hooked up will tend to “dry out” the battery. Non maintenance batteries don’t seem to be an issue. As far as homeowners insurance, the ones I use ( Battery Tender brand ) is UL laboratory tested and rated, so I don’t see where it would be any more dangerous than a coffee pot… in fact I would bet coffee pots have burned more houses down than battery chargers. Our insurance obligates unplugging all batteries from machines that do not get used on regularly basis. Like over a winter periode 4 Share this post Link to post Share on other sites
D_Mac 8,618 #13659 Posted November 24, 2021 We got a few inches of snow last night. I had to take the 875 out to play in it. I'm sure the snow didn't need to be cleared from the driveway but what fun would that be. 7 5 Share this post Link to post Share on other sites
kpinnc 12,028 #13660 Posted November 24, 2021 (edited) 11 hours ago, sodaking27 said: Starting to look a little better. Just my opinion- but I wouldn't change anthing on that machine. It looks great just as it is! Edited November 24, 2021 by kpinnc 4 Share this post Link to post Share on other sites
Maxwell-8 4,275 #13661 Posted November 24, 2021 I just drove an hour to pick up the HI-LOW shifter of my C141D that my mind forgot when picking up the chassis. I hope I have everything now, since the Decklift mechanism came in a box. We got to keep these horses as complete as possible! 5 Share this post Link to post Share on other sites
OutdoorEnvy 1,522 #13662 Posted November 24, 2021 Did a little bit to the 312-8 today...replaced the leaky fuel valve and grommet. Also put on the snow plow for the season...and BEST of all! I got it to fit in the shed with all the other stuff! It's an 8x10 so a game of tetris was in order... 5 2 Share this post Link to post Share on other sites
WheelHorse520H 708 #13663 Posted November 24, 2021 I got the plow off of my 607 (plow was originally bought for the 520) and put it back on the 520 after I FINALLY got my flywheel key. It was nice to have both tractors running. 1 3 Share this post Link to post Share on other sites
Maxwell-8 4,275 #13664 Posted November 25, 2021 33 minutes ago, WheelHorse520H said: It was nice to have both tractors running. Sure is, I hope I can say that sunday as well, when I own my first horse for one year! 4 Share this post Link to post Share on other sites
WheelHorse520H 708 #13665 Posted November 25, 2021 1 hour ago, Maxwell-8 said: I own my first horse for one year! Aaaahhh, my one year is in April. It was my dad’s for about 5 years but then I got it running for him so he gave it to me because he was going scrap it long ago. I’m torn on which I like better. They’re both great but for almost opposite reasons. 4 1 Share this post Link to post Share on other sites
ebinmaine 67,496 #13666 Posted November 25, 2021 16 minutes ago, WheelHorse520H said: I’m torn on which I like better. They’re both great but for almost opposite reasons No need to choose. Accept them for what they are and get a few more. 1 2 Share this post Link to post Share on other sites
WheelHorse520H 708 #13667 Posted November 25, 2021 3 minutes ago, ebinmaine said: No need to choose. Accept them for what they are and get a few more. I always knew you were wise. That’s advice I can use. 1 2 Share this post Link to post Share on other sites
ebinmaine 67,496 #13668 Posted November 25, 2021 5 minutes ago, WheelHorse520H said: wise Oh I'm that alright but it's usually followed by another word that's synonymous with donkey 🐴🐴 1 2 Share this post Link to post Share on other sites
Handy Don 12,225 #13669 Posted November 25, 2021 Burro? 2 Share this post Link to post Share on other sites
Maxwell-8 4,275 #13670 Posted November 25, 2021 That is the beautiful part of Wheel Horses. their are some many different models, they have been made for so long, and so they all have their own strengths and characters. 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #13671 Posted November 25, 2021 8 hours ago, ebinmaine said: Oh I'm that alright but it's usually followed by another word that's synonymous with donkey 🐴🐴 8 hours ago, Handy Don said: Burro? Quadraped? 2 Share this post Link to post Share on other sites
Maxwell-8 4,275 #13672 Posted November 25, 2021 Today I drove my first horse for the first time. I have her almost a complete year. But transmission and fuel problems caused a serious delay on the first drive. Luckily today was the day DSC_0629_Trim.mp4 PS: don't mind my hair, I need to see the Barber ASAP. they have strict rules due to covid. 1 8 Share this post Link to post Share on other sites
Snoopy11 5,714 #13673 Posted November 25, 2021 1 minute ago, Maxwell-8 said: Today I drove my first horse for the first time. I have her almost a complete year. But transmission and fuel problems caused a serious delay on the first drive. Luckily today was the day We are not worthy Don 1 Share this post Link to post Share on other sites
Gregor 4,846 #13674 Posted November 25, 2021 1 minute ago, Maxwell-8 said: don't mind my hair, I need to see the Barber ASAP. they have strict rules due to covid. A lot of us wish we had that hair. 2 5 Share this post Link to post Share on other sites
ebinmaine 67,496 #13675 Posted November 25, 2021 Working on the C160 Automatic today. I needed to move the seat back as much as possible for extra Bear 🐻 space. We don't use seat springs. Took them off and sold them last week. The rear seat spring pan mount holes at the hinge point are cracked some. I decided to attempt bolting the 1.5" structural square tubing in through the 4 new seat holes and also 4 other holes to hold the square tubing to the pan better. 4 short bolts go through the interior of the tubing and the pan. 4 long bolts go all the way through the pan, tubing and into the seat. Certainly much more sturdy and I've gained several inches of room. Next is to repair or replace the bracket where the latch catches. Then, clamps on the fuel system. 4 2 Share this post Link to post Share on other sites
