peter lena 8,627 #13551 Posted November 15, 2021 @AMC RULES that honda set up looks awesome ! think its the way to go , for a repower , solid performance, did a total clear vinyl fuel rated hose change out today , on a 91 ,c12 . hose was getting hard , ran it thru a spiral wrap , wire protector , with hanger mounts , for a no chafing fit. have an ignition switch wire harness coming in , to cover erratic charging. found a split and somewhat fried connector . just staying after what ever , that honda looks like it was made or it , pete 2 Share this post Link to post Share on other sites
peter lena 8,627 #13552 Posted November 15, 2021 @TonyToro bought a new c-85 in 82 , came with that 36" R/D deck ,8 hp kohler , still have them both , coming on 40 years , deck is still solid no rot and regularly maintained , put a 12 horse magnum in it a few years back , my other decks are 42" RD . could not tell you how many miles of grass that 36 cut , but R/D decks are my favorite , grass always looks good , pete 2 Share this post Link to post Share on other sites
Horse Newbie 7,069 #13553 Posted November 15, 2021 18 hours ago, kpinnc said: If you can do it in a week, I for one will be impressed! That’s exactly what I thought ! Share this post Link to post Share on other sites
TonyToro 1,049 #13554 Posted November 16, 2021 Ok as requested…..there the the little Work Horse. Check out the custom headlight inserts!! 5 3 1 Share this post Link to post Share on other sites
kpinnc 12,028 #13555 Posted November 16, 2021 1 hour ago, TonyToro said: Check out the custom headlight inserts! It looks like it's shocked at something in front of it. Did you take that pic while sitting on a C160 or something? 5 Share this post Link to post Share on other sites
Snoopy11 5,714 #13556 Posted November 16, 2021 14 hours ago, TonyToro said: We are not worthy Don 2 Share this post Link to post Share on other sites
balconio 606 #13557 Posted November 16, 2021 Oh no you don't, old man winter. I remember being caught with my pants down in November 2019. Not this year. I got the wheel weights swapped, the set screws tightened and a brand new #40 chain on the blower. Bring it! 4 11 Share this post Link to post Share on other sites
Horse Newbie 7,069 #13558 Posted November 16, 2021 I didn’t know they made Work Horses without lugs on the rear wheels… 1 Share this post Link to post Share on other sites
TonyToro 1,049 #13559 Posted November 17, 2021 2 hours ago, Horse Newbie said: I didn’t know they made Work Horses without lugs on the rear wheels… I didn’t know they made Work Horses in the lawn tractor size either. 😂 1 Share this post Link to post Share on other sites
balconio 606 #13560 Posted November 17, 2021 On 11/11/2021 at 4:20 PM, Pullstart said: One of the neighbor boys who is interested in mechanical things came over yesterday. We tinkered with the new haul, the 520-8, GT1642 and 310-8. The 520 will surely need the carb rebuilt, but we heard it spitter at least, the GT1642 ran pretty smoky but cleaned up, and the 310-8 purrs. I don’t think he figured he’d get the chance to drive one. At first, he asked if I had any project quads I’d sell him. After 15 minutes on the 310, he decided he no longer needs a quad! Nice bus! I just bought one, mine is a lot older though. It's got air brakes/suspension and a DT466 with a 6 speed Eaton 4 1 Share this post Link to post Share on other sites
Handy Don 12,222 #13561 Posted November 17, 2021 13 minutes ago, balconio said: Nice bus! I just bought one, mine is a lot older though. It's got air brakes/suspension and a DT466 with a 6 speed Eaton What are you planning for it? 1 Share this post Link to post Share on other sites
balconio 606 #13562 Posted November 17, 2021 2 minutes ago, Handy Don said: What are you planning for it? RV conversion. She's got some miles but that DT engine is a real runner and she shifts great. We almost have all the seats ripped out. Should be a great over winter project. 3 Share this post Link to post Share on other sites
Tractorhead 9,064 #13563 Posted November 17, 2021 1 hour ago, balconio said: RV conversion. She's got some miles but that DT engine is a real runner and she shifts great. We almost have all the seats ripped out. Should be a great over winter project. Maybe depending on Snow one Day more... 😂 Cool project. If you plan right, you can use it also as a Toy hauler... 😎 3 Share this post Link to post Share on other sites
Pullstart 62,867 #13564 Posted November 17, 2021 @balconio nice! This is an ‘09 6.7 Cummins/Allison combo. Has air bags on the rear springs and 134k on the ticker. 2 Share this post Link to post Share on other sites
ebinmaine 67,494 #13565 Posted November 17, 2021 Got all the other 6 weights descrubberized of the biggest rust and paint flakes. The Paint Department is working on spraying them. Bring one outside. Spray some red. Bring it inside. Repeat. I had started to soak the carb off the '75 C160 Automatic the other day. This evening I spent a few minutes finishing up the cleaning out process with brake clean. Also wire brushed the exterior of the carb body. 7 4 Share this post Link to post Share on other sites
ebinmaine 67,494 #13566 Posted November 17, 2021 Another K341 carb ready to go. 2 7 Share this post Link to post Share on other sites
ebinmaine 67,494 #13567 Posted November 17, 2021 2 4 Share this post Link to post Share on other sites
Handy Don 12,222 #13568 Posted November 17, 2021 51 minutes ago, ebinmaine said: descrubberized Hmmm. 2 Share this post Link to post Share on other sites
Wheelhorse#1 1,657 #13569 Posted November 17, 2021 Everyone been busy fixen ,I’ve been breaking stuff. Broke my own rule, never use a impact drill on the small stuff even if you feather the trigger 😬 Good news is a successful extraction.. 5 2 1 Share this post Link to post Share on other sites
Wheelhorse#1 1,657 #13570 Posted November 17, 2021 On 11/14/2021 at 8:35 PM, Snoopy11 said: On 11/14/2021 at 8:20 PM, TonyToro said: tiny deck maybe 36 Maybe... but don't mock the little guy... Never judge a WH by the size of its Deck ! 😆 1 7 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #13571 Posted November 18, 2021 52 minutes ago, Wheelhorse#1 said: Never judge a WH by the size of its Deck ! 😆 It’s not the size of the deck that matters… it’s how the moves those spindles that counts… 3 1 2 Share this post Link to post Share on other sites
ebinmaine 67,494 #13572 Posted November 18, 2021 34 minutes ago, SylvanLakeWH said: It’s not the size of the deck that matters… it’s how the moves those spindles that counts… Yeah right well whatever.... I don't even use a flippin' Horse to mow....... So no spindle nothin here. 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #13573 Posted November 18, 2021 (edited) 54 minutes ago, SylvanLakeWH said: It’s not the size of the pto driven implement that matters… it’s how the moves the belt that counts… @ebinmaine There… fixed it for ya “no grass” woodsy types… Edited November 18, 2021 by SylvanLakeWH 5 Share this post Link to post Share on other sites
ebinmaine 67,494 #13574 Posted November 18, 2021 8 hours ago, SylvanLakeWH said: @ebinmaine There… fixed it for ya “no grass” woodsy types… Hahahahahahaha. You're a good man. 1 Share this post Link to post Share on other sites
kpinnc 12,028 #13575 Posted November 18, 2021 14 hours ago, ebinmaine said: Yeah right well whatever.... I don't even use a flippin' Horse to mow....... Same here. I have a dedicated "lawnmower" (Scag) for mowing. My Wheel Horses do the other work, and back up the zero turn as needed. No sense wearing them out with a mower. I want them to last at least as long as I do... 4 1 Share this post Link to post Share on other sites
