Maxwell-8 4,275 #13501 Posted November 11, 2021 3 hours ago, AMC RULES said: If that thing was picking two railroad ties at once, that's pretty impressive in and of itself. And that without a driver siting on it.. 3 Share this post Link to post Share on other sites
Oldskool 6,644 #13502 Posted November 11, 2021 1 hour ago, Maxwell-8 said: And that without a driver siting on it.. Remote controlled? Share this post Link to post Share on other sites
AMC RULES 37,130 #13503 Posted November 11, 2021 (edited) Lots of W-H maintenance going on here today... then sadly, securing summer projects to dry storage for the upcoming winter season. Edited November 11, 2021 by AMC RULES 2 3 1 Share this post Link to post Share on other sites
adsm08 2,057 #13504 Posted November 11, 2021 19 hours ago, ebinmaine said: Yours burn peanut 🥜🥜 butter ???? Sediment bowl screen plugged up again while I was almost done mowing. I grabbed an empty peanut butter jar that my neighbor keeps gas in (don't ask), dropped my fuel line in it, and finished mowing. 4 Share this post Link to post Share on other sites
Pullstart 62,866 #13505 Posted November 11, 2021 One of the neighbor boys who is interested in mechanical things came over yesterday. We tinkered with the new haul, the 520-8, GT1642 and 310-8. The 520 will surely need the carb rebuilt, but we heard it spitter at least, the GT1642 ran pretty smoky but cleaned up, and the 310-8 purrs. I don’t think he figured he’d get the chance to drive one. At first, he asked if I had any project quads I’d sell him. After 15 minutes on the 310, he decided he no longer needs a quad! 4 6 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #13506 Posted November 11, 2021 Finished seat pan stabilization project and fabricated a guard for the exposed wires on the clutch side of the E 141 electric motor… going to keep the pics etc. in that thread… 6 Share this post Link to post Share on other sites
Cee245 818 #13507 Posted November 12, 2021 Got my new seat installed and put chains and weights on the 416h 6 1 Share this post Link to post Share on other sites
nyquil junkie 225 #13508 Posted November 12, 2021 (edited) 16 hours ago, AMC RULES said: If that thing was picking two railroad ties at once, that's pretty impressive in and of itself. It will pick up 3 but it might bend something driving around...and it would need more ballast. It lifts 2 pretty easy. I sling lifted 3 once but it lifted the back off the ground... Edited November 12, 2021 by nyquil junkie Share this post Link to post Share on other sites
ebinmaine 67,492 #13509 Posted November 12, 2021 The local Bear 🐻 tolerant S/O aka The Paint Department put 2 coats of off white on this weight. She finds the Ace Hardware paint to spray just fine but not cover as well as her preferred Rust-Oleum 2X. If this weight stays white it'll need at least 2 more coats. Likely it'll get changed to IH Red or black. I've been gathering parts to change over (whatever tractor has the fluid filled front tires) to a 5 x 4.5 pattern trailer hub. Those tires are mounted on old crapsmen wheels which actually don't have any bearing of any kind in them. Solid 3/4" hole simply turns on the WH spindle. I've been greasing them once or twice a year for (3?) Years now. As one could imagine there's some wear on the spindles. I have a set of trailer stub axles drilled for 3/4" thanks to the generosity of a Redsquare member. I found these hub/axle kits for a VERY reasonable price. I'll set the axle stubs aside for another project. All I need now is a set of 5 x 4.5 - 8" diameter 6 or 7 wide wheels and I'll be able to have the Rimguard fluid and my own tires swapped over. 3 Share this post Link to post Share on other sites
AMC RULES 37,130 #13510 Posted November 12, 2021 (edited) Finally got this old Pond walk behind mocked up with a Briggs model 6s today. Edited November 12, 2021 by AMC RULES 2 8 Share this post Link to post Share on other sites
JoeM 7,874 #13511 Posted November 12, 2021 It is not my WH, but is the neighbors new to him 312H. I fished up the fabrication on the rear receiver hitch and carrier for his sand. Put the Kenda Tera Trac winter grips on and test fit the carrier. He is working toward getting ready for the snow. 4 8 1 Share this post Link to post Share on other sites
Maxwell-8 4,275 #13512 Posted November 13, 2021 14 hours ago, JoeM said: the rear receiver hitch and carrier On the agenda here as well after the compressor gets finished. I always seem to be lacking storage space on my horses. 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #13513 Posted November 13, 2021 Thanks to Lowell Wheelhorsepartsandmore the E 141 and C 105 got new tie rods this morning! Denali the shop dog was more than happy to be in the garage and not out in the rain snow sleet slime coming down at the moment… (he’d be a lot more help if he had opposable thumbs but hey, can’t get good help these days…) 7 4 Share this post Link to post Share on other sites
pfrederi 17,739 #13514 Posted November 13, 2021 You should let the dog have the mat instead of using t for a tool rest 3 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #13515 Posted November 13, 2021 1 minute ago, pfrederi said: You should let the dog have the mat instead of using t for a tool rest Notice over his right shoulder… there’s a nice flowered pad for him… (don’t show the Boss )… but he’s too tough and rugged to be filmed in the shop laying on a sissy pad… 2 Share this post Link to post Share on other sites
Andy N. 2,154 #13516 Posted November 13, 2021 Got a new seat installed on the 418-A. Just kidding! Here's the new seat. Very nice quality. 3 1 5 Share this post Link to post Share on other sites
cblessj 88 #13517 Posted November 13, 2021 Fabbed up a front "bumper" to hang some suitcase weights on... 3 5 Share this post Link to post Share on other sites
cblessj 88 #13518 Posted November 13, 2021 ...and made my own wheel weights from a $40 walmart free weight setand some steel stock i had in the shop. 50lbs + about 5lbs of hardware per wheel. 5 2 Share this post Link to post Share on other sites
cblessj 88 #13519 Posted November 13, 2021 Heres what they look like without the weights (before i painted them WH red) 8 1 Share this post Link to post Share on other sites
cblessj 88 #13520 Posted November 13, 2021 16 minutes ago, Andy N. said: Got a new seat installed on the 418-A. Just kidding! Here's the new seat. Very nice quality. If i had a seat like that, I would be afraid I would fall asleep while I was cutting the grass. Looks comfy! 3 2 Share this post Link to post Share on other sites
ebinmaine 67,492 #13521 Posted November 14, 2021 1 hour ago, Andy N. said: seat Odd as it sounds I'd be into that. All our seats are flat on the fender with no springs. 1 2 Share this post Link to post Share on other sites
Jacob S 67 #13522 Posted November 14, 2021 I got a new 48 plow. can’t wait to plow!! 2 6 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #13523 Posted November 14, 2021 21 minutes ago, ebinmaine said: Odd as it sounds I'd be into that. All our seats are flat on the fender with no springs. Odd? No… Frugal? Cheap? Thrifty? Efficient? Yes… Cuts down on future parts costs / repairs… 3 Share this post Link to post Share on other sites
Maxwell-8 4,275 #13524 Posted November 14, 2021 (edited) Got the current herd to line up for a picture. A M12, M16 and a KT17 bounded to a 4 speed, 8speed and a Sundstrand hydro Edited November 14, 2021 by Maxwell-8 autocorrect made a mistake 6 4 1 Share this post Link to post Share on other sites
JoeM 7,874 #13525 Posted November 14, 2021 3 hours ago, Maxwell-8 said: Got the current herd to line up for a picture. Looks like a gangster flanked by a couple hit men! Needs a caption "We mean business!" 5 Share this post Link to post Share on other sites
